APT17F100B

APT17F100B APT17F100S 1000V, 17A, 0.78Ω Max, trr ≤245ns N-Channel FREDFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced trr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a greatly reduced ratio of Crss/Ciss result in excellent noise immunity and low switching loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control di/dt during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. TO -2 47 D3PAK APT17F100B APT17F100S D Single die FREDFET G S FEATURES • Fast switching with low EMI • Low trr for high reliability • Ultra low Crss for improved noise immunity • Low gate charge • Avalanche energy rated • RoHS compliant TYPICAL APPLICATIONS • ZVS phase shifted and other full bridge • Half bridge • PFC and other boost converter • Buck converter • Single and two switch forward • Flyback Absolute Maximum Ratings Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive 1 Ratings 17 11 70 ±30 1070 9 Unit A V mJ A Thermal and Mechanical Characteristics Symbol PD RθJC RθCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) 0.22 Package Weight 5.9 10 Torque Mounting Torque ( TO-247 Package), 6-32 or M3 screw 1.1 MicrosemiWebsite-http://www.microsemi.com N·m -55 0.11 150 °C 300 oz g in·lbf 04-2009 050-8159 Rev C Min Typ Max 625 0.20 Unit W °C/W Static Characteristics Symbol VBR(DSS) ΔVBR(DSS)/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ IDSS IGSS TJ = 25°C unless otherwise specified Test Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 9A VGS = VDS, ID = 1mA VDS = 1000V VGS = 0V TJ = 25°C TJ = 125°C APT17F100B_S Typ 1.15 0.67 4 -10 Max Unit V V/°C Ω V mV/°C µA nA Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance 3 Min 1000 Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current 2.5 0.78 5 250 1000 ±100 VGS = ±30V Dynamic Characteristics Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 4 TJ = 25°C unless otherwise specified Test Conditions VDS = 50V, ID = 9A VGS = 0V, VDS = 25V f = 1MHz Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Min Typ 19 4845 65 405 165 Max Unit S pF VGS = 0V, VDS = 0V to 667V 5 Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time VGS = 0 to 10V, ID = 9A, VDS = 500V Resistive Switching VDD = 667V, ID = 9A RG = 4.7Ω 6 , VGG = 15V 85 150 26 70 29 31 105 28 nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD trr Qrr Irrm dv/dt Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Peak Recovery dv/dt Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Min D Typ Max 17 Unit G S A 65 1.0 245 465 V ns µC A 25 V/ns ISD = 9A, TJ = 25°C, VGS = 0V TJ = 25°C TJ = 125°C ISD = 9A 3 diSD/dt = 100A/µs VDD = 100V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C ISD ≤ 9A, di/dt ≤1000A/µs, VDD = 400V, TJ = 125°C 215 385 1.02 2.57 9.03 12.83 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 26.42mH, RG = 25Ω, IAS = 9A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 04-2009 Rev C 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.41E-8/VDS^2 + 2.48E-9/VDS + 4.81E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. 050-8159 APT17F100B_S 40 V GS 14 = 10V T = 125°C J 35 TJ = -55°C 12 ID, DRIAN CURRENT (A) V GS ID, DRAIN CURRENT (A) 30 25 20 TJ = 25°C = 6, 7, 8 & 9V 10 8 6 4 2 0 4.5V 5V 15 10 5 0 TJ = 125°C TJ = 150°C 0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 3.0 NORMALIZED TO VGS = 10V @ 9A 60 VDS> ID(ON) x RDS(ON) MAX. 250µSEC. PULSE TEST @