TYPICAL PERFORMANCE CURVES
APT20GN60K(G) 600V
APT20GN60K APT20GN60KG*
*G Denotes RoHS Compliant, Pb Free Terminal Finish.
Utilizing the latest Field Stop and Trench Gate technologies, these IGBT's have ultra low VCE(ON) and are ideal for low frequency applications that require absolute minimum conduction loss. Easy paralleling is a result of very tight parameter distribution and a slightly positive VCE(ON) temperature coefficient. Low gate charge simplifies gate drive design and minimizes losses.
TO-220
• 600V Field Stop
• • • • Trench Gate: Low VCE(on) Easy Paralleling 6µs Short Circuit Capability 175°C Rated
C G E
Applications: Welding, Inductive Heating, Solar Inverters, SMPS, Motor drives, UPS
MAXIMUM RATINGS
Symbol VCES VGE I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Continuous Collector Current @ TC = 25°C Continuous Collector Current @ TC = 110°C Pulsed Collector Current
1
All Ratings: TC = 25°C unless otherwise specified.
APT20GN60K(G) UNIT Volts
600 ±30 40 24 60 60A @ 600V 136 -55 to 175
Amps
@ TC = 175°C
Switching Safe Operating Area @ TJ = 175°C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec.
Watts °C
300
STATIC ELECTRICAL CHARACTERISTICS
Symbol V(BR)CES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 2mA) Gate Threshold Voltage (VCE = VGE, I C = 290µA, Tj = 25°C) MIN TYP MAX Units
600 5.0 1.1 5.8 1.5 1.7 25
2
6.5 1.9
Volts
Collector-Emitter On Voltage (VGE = 15V, I C = 20A, Tj = 25°C) Collector-Emitter On Voltage (VGE = 15V, I C = 20A, Tj = 125°C)
I CES I GES
Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 25°C)
2
µA
nA
7-2008 052-6295 Rev A
Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 125°C) Gate-Emitter Leakage Current (VGE = ±20V)
1000 300
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
Microsemi Website - http://www.microsemi.com
DYNAMIC CHARACTERISTICS
Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA SCSOA td(on) tr td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge
3
APT20GN60K(G)
Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VGE = 15V VCE = 300V I C = 20A TJ = 175°C, R G = 4.3Ω
7,
MIN
TYP
MAX
UNIT
1110 50 35 9.5 120 10 70
VGE = nC V pF
Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Short Circuit Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy
4 5
15V, L = 100µH,VCE = 600V VCC = 360V, VGE = 15V, TJ = 150°C, R G = 4.3Ω 7 Inductive Switching (25°C) VCC = 400V VGE = 15V I C = 20A RG = 4.3Ω 7 TJ = +25°C
60 6 9 10 140 95 230 260 580 9 10 160 130 250 450 750
A
µs
ns
Turn-on Switching Energy (Diode) Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy
44 6
µJ
Inductive Switching (125°C) VCC = 400V VGE = 15V I C = 20A RG = 4.3Ω 7
55
ns
Turn-on Switching Energy (Diode) Turn-off Switching Energy
66
TJ = +125°C
µJ
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol RθJC RθJC WT Characteristic Junction to Case (IGBT) Junction to Case (DIODE) Package Weight MIN TYP MAX UNIT °C/W gm
1.1 N/A 1.2
1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, Ices includes both IGBT and FRED leakages 3 See MIL-STD-750 Method 3471. 4 Eon1 is the clamped inductive turn-on energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. Tested in inductive switching test circuit shown in figure 21, but with a Silicon Carbide diode. 5 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. (See Figures 21, 22.) 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) 7 RG is external gate resistance, not including RG(int) nor gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein. 7-2008 052-6295 Rev A
TYPICAL PERFORMANCE CURVES
40
V
GE
APT20GN60K(G)
90 15V 80 14V 13V
= 15V
35 IC, COLLECTOR CURRENT (A) TJ = 25°C 30 25 TJ = 125°C 20 15 TJ = 175°C 10 5 0 TJ = -55°C IC, COLLECTOR CURRENT (A)
70 60
12V 50 40 30 20 10 0 11V 10V 9V 8V 0 5 10 15 20 25 30 VCE, COLLECTER-TO-EMITTER VOLTAGE (V)
0 0.5 1.0 1.5 2.0 2.5 3.0 VCE, COLLECTER-TO-EMITTER VOLTAGE (V)
250µs PULSE TEST
很抱歉,暂时无法提供与“APT20GN60KG”相匹配的价格&库存,您可以联系我们找货
免费人工找货