APT28M120L

APT28M120B2 APT28M120L 1200V, 28A, 0.56Ω Max N-Channel MOSFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. T-MaxTM TO-264 APT28M120B2 Single die MOSFET APT28M120L D G S FEATURES • Fast switching with low EMI/RFI • Low RDS(on) • Ultra low Crss for improved noise immunity • Low gate charge • Avalanche energy rated • RoHS compliant TYPICAL APPLICATIONS • PFC and other boost converter • Buck converter • Two switch forward (asymmetrical bridge) • Single switch forward • Flyback • Inverters Absolute Maximum Ratings Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive 1 Ratings 28 17 104 ±30 2165 14 Unit A V mJ A Thermal and Mechanical Characteristics Symbol PD RθJC RθCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight 0.22 6.2 10 1.1 -55 0.11 150 300 Min Typ Max 1135 0.11 Unit W °C/W °C oz g in·lbf N·m 12-2006 050-8097 Rev A Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw Microsemi Website - http://www.microsemi.com Static Characteristics Symbol VBR(DSS) ∆VBR(DSS)/∆TJ RDS(on) VGS(th) ∆VGS(th)/∆TJ IDSS IGSS TJ = 25°C unless otherwise specified Test Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 14A APT28M120B2_L Typ 1.41 0.48 4 -10 Max Unit V V/°C Ω V mV/°C µA nA Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance 3 Min 1200 Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current VGS = VDS, ID = 2.5mA VDS = 1200V VGS = 0V TJ = 25°C TJ = 125°C 3 0.56 5 100 500 ±100 VGS = ±30V Dynamic Characteristics Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 4 TJ = 25°C unless otherwise specified Test Conditions VDS = 50V, ID = 14A VGS = 0V, VDS = 25V f = 1MHz Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Min Typ 31 9670 115 715 275 Max Unit S pF 5 VGS = 0V, VDS = 0V to 800V Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time VGS = 0 to 10V, ID = 14A, VDS = 600V Resistive Switching VDD = 800V, ID = 14A RG = 2.2Ω 6 , VGG = 15V 140 300 50 140 50 31 170 48 nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD trr Qrr dv/dt Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Min D Typ Max 28 Unit A G S 104 1 1290 33 10 V ns µC V/ns ISD = 14A, TJ = 25°C, VGS = 0V ISD = 14A 3 diSD/dt = 100A/µs, TJ = 25°C ISD ≤ 14A, di/dt ≤1000A/µs, VDD = 100V, TJ = 125°C 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 22.09mH, RG = 2.2Ω, IAS = 14A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -4.40E-7/VDS^2 + 5.34E-8/VDS + 7.59E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. 050-8097 Rev A 12-2006 90 80 ID, DRAIN CURRENT (A) 70 60 50 40 30 20 10 0 V GS = 10V 30 25 ID, DRIAN CURRENT (A) TJ = -55°C APT28M120B2_L T = 125°C J V GS = 6, 7, 8 & 9V 20 15 10 5 0 4.5V 5V TJ = 25°C TJ = 125°C TJ = 150°C 30 25 20 15 10 5 0 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics NORMALIZED TO VGS = 10V @ 14A 0 30 25 20 15 10 5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 3.0 2.5 2.0 1.5 1.0 0.5 100 VDS> ID(ON) x RDS(ON) MAX. 250µSEC. PULSE TEST @