APT2x30DQ60J

2 3 2 3 2 1 4 3 1 4 1 4 Anti-Parallel APT2x30DQ60J Parallel APT2x31DQ60J ISOTOP ® SO 2 T- 27 "UL Recognized" file # E145592 APT2x31DQ60J APT2x30DQ60J 600V 600V 30A 30A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters • Snubber Diode PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular SOT-227 Package • Low Forward Voltage • High Blocking Voltage • Low Leakage Current • Avalanche Energy Rated PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density • Uninterruptible Power Supply (UPS) • Induction Heating • High Speed Rectifiers MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM EAVL TJ,TSTG Characteristic / Test Conditions Maximum D.C. Reverse Voltage All Ratings Per Diode: TC = 25°C unless otherwise specified. APT2x31_30DQ60J UNIT Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage Maximum Average Forward Current (TC = 100°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Avalanche Energy (1A, 40mH) Operating and StorageTemperature Range 600 Volts 30 42 320 20 -55 to 175 mJ °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 30A VF Forward Voltage IF = 60A IF = 30A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V Microsemi Website - http://www.microsemi.com VR = 600V VR = 600V, TJ = 125°C MIN TYP MAX UNIT 1.8 2.0 1.3 2.2 Volts 7-2008 053-4203 Rev E 25 500 36 µA pF DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A, diF/dt = -1000A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN - APT2x31_30DQ60J TYP MAX UNIT ns nC Amps ns nC Amps ns nC Amps 21 25 35 3 160 480 6 85 920 20 - THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC VIsolation WT Junction-to-Case Thermal Resistance RMS Voltage (50-60hHz Sinusoidal Wavefomr Ffrom Terminals to Mounting Base for 1 Min.) Package Weight MIN TYP MAX UNIT °C/W Volts 1.21 2500 1.03 29.2 10 1.1 oz g lb•in N•m Torque Maximum Mounting Torque Microsemi reserves the right to change, without notice, the specifications and information contained herein. 1.40 Z JC, THERMAL IMPEDANCE (°C/W) θ 1.20 1.00 0.80 0.60 0.40 0.20 0 0.7 0.5 0.3 0.1 0.05 10 -5 D = 0.9 Note: PDM t1 t2 SINGLE PULSE 10 -4 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION TJ (°C) 7-2008 0.320 Dissipated Power (Watts) 0.00278 0.0421 0.242 0.515 TC (°C) 0.375 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction. 053-4203 Rev E FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL ZEXT TYPICAL PERFORMANCE CURVES 120 100 80 60 TJ = 125°C 40 20 0 TJ = 175°C TJ = 25°C TJ = -55°C 0.5 1 1.5 2 2.5 3 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1400 Qrr, REVERSE RECOVERY CHARGE (nC) 1200 1000 800 600 400 200 0 T = 125°C J V = 400V R 180 trr, REVERSE RECOVERY TIME (ns) 160 140 120 100 80 60 40 20 60A APT2X31_30DQ60J T = 125°C J V = 400V R IF, FORWARD CURRENT (A) 30A 15A 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 25 T = 125°C J V = 400V R 0 60A 60A 20 15 30A 15A 30A 10 15A 5 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.2 1.0 0.8 0.6 0.4 0.2 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 200 CJ, JUNCTION CAPACITANCE (pF) 180 160 140 120 100 0.0 0 trr Qrr IRRM 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 0 70 60 IF(AV) (A) 50 40 30 Duty cycle = 0.5 T = 175°C J 0 trr Qrr 20 10 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 60 40 20 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1 053-4203 Rev E 7-2008 80 APT2x31_30DQ60J Vr +18V 0V D.U.T. 30µH trr/Qrr Waveform diF /dt Adjust APT6017LLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions SOT-227 (ISOTOP®) Package Outline 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 7-2008 1.95 (.077) 2.14 (.084) Anti-parallel APT2x30DQ60J 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) APT2x31DQ60J Parallel Anode 2 Cathode 1 Cathode 1 Anode 1 053-4203 Rev E Dimensions in Millimeters and (Inches) Cathode 2 Anode 1 Cathode 2 Anode 2 ISOTOP® is a Registered Trademark of SGS Thomson. APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.