APT30GS60BRDQ2

APT30GS60BRDQ2(G) APT30GS60SRDQ2(G) 600V, 30A, VCE(ON) = 2.8V Typical Thunderbolt® High Speed NPT IGBT with Anti-Parallel 'DQ' Diode The Thunderbolt HS™ series is based on thin wafer non-punch through (NPT) technology similar to the Thunderbolt® series, but trades higher VCE(ON) for significantly lower turn-on energy Eoff. The low switching losses enable operation at switching frequencies over 100kHz, approaching power MOSFET performance but lower cost. An extremely tight parameter distribution combined with a positive VCE(ON) temperature coefficient make it easy to parallel Thunderbolts HS™ IGBT's. Controlled slew rates result in very good noise and oscillation immunity and low EMI. The short circuit duration rating of 10µs make these IGBT's suitable for motor drive and inverter applications. Reliability is further enhanced by avalanche energy ruggedness. Combi versions are packaged with a high speed, soft recovery DQ series diode. TO -2 47 D3PAK Features • Fast Switching with low EMI • Very Low EOFF for Maximum Efficiency • Short circuit rated • Low Gate Charge • Tight parameter distribution • Easy paralleling • RoHS Compliant Typical Applications APT30GS60BRDQ2(G) APT30GS60SRDQ2(G) • ZVS Phase Shifted and other Full Bridge • Half Bridge • High Power PFC Boost • Welding • Induction heating • High Frequency SMPS Single die IGBT with separate DQ diode die Absolute Maximum Ratings Symbol I C1 I C2 I CM VGE SSOA EAS tSC IF I FRM Symbol PD RθJC RθCS TJ, TSTG TL WT Torque Parameter Continuous Collector Current TC = @ 25°C Continuous Collector Current TC = @ 100°C Pulsed Collector Current 1 Gate-Emitter Voltage Switching Safe Operating Area Single Pulse Avalanche Energy 2 Short Circut Withstand Time 3 Diode Continuous Forward Current Diode Max. Repetitive Forward Current Parameter Total Power Dissipation TC = @ 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight Mounting Torque (TO-247), 6-32 M3 Screw IGBT Diode -55 0.11 0.22 5.9 Min TC = 25°C TC = 100°C Rating 54 30 113 ±30V 113 165 10 90 55 113 Typ Max 250 0.50 0.67 150 300 10 1.1 °C oz g in·lbf N·m 8-2007 052-6302 Rev A Unit A V mJ µs A Thermal and Mechanical Characteristics Unit W °C/W CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should be Followed. Microsemi Website - http://www.microsemi.com Static Characteristics Symbol VBR(CES) ∆VBR(CES)/∆TJ TJ = 25°C unless otherwise specified Test Conditions VGE = 0V, IC = 250µA Reference to 25°C, IC = 250µA APT30GS60B_SRDQ2(G) Min 600 3 Typ 0.60 2.8 3.25 1.85 1.5 4 6.7 Max 3.15 5 50 1000 ±100 mV/°C µA nA V Unit V V/°C Parameter Collector-Emitter Breakdown Voltage Breakdown Voltage Temperature Coeff VCE(ON) VEC VGE(th) Collector-Emitter On Voltage 4 Diode Forward Voltage 4 Gate-Emitter Threshold Voltage VGE = 15V IC = 30A IC = 30A TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C ∆VGE(th)/∆TJ Threshold Voltage Temp Coeff ICES IGES Zero Gate Voltage Collector Current Gate-Emitter Leakage Current VGE = VCE, IC = 1mA VCE = 600V, VGE = 0V TJ = 25°C TJ = 125°C VGE = ±20V Dynamic Characteristics Symbol gfs Cies Coes Cres Co(cr) Co(er) Qg Qge Ggc td(on) tr td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff trr 8-2007 Parameter Input Capacitance Output Capacitance TJ = 25°C unless otherwise specified Test Conditions VCE = 50V, IC = 30A Min - Typ 18 1600 140 90 130 95 Max - Unit S Forward Transconductance Reverse Transfer Capacitance Reverse Transfer Capacitance Charge Related 5 Reverse Transfer Capacitance Current Related 6 Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Energy Turn-On Switching Energy Turn-Off Switching Energy Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Energy Turn-On Switching Energy 8 9 8 9 10 VGE = 0V, VCE = 25V f = 1MHz pF VGE = 0V VCE = 0 to 400V VGE = 0 to 15V IC = 30A, VCE = 300V - 145 12 65 16 29 360 27 TBD 800 570 16 29 390 22 TBD 1185 695 25 35 3 ns nC A µJ ns µJ ns nC Inductive Switching IGBT and Diode: TJ = 25°C, VCC = 400V, IC = 30A RG = 9.1Ω 7, VGG = 15V Inductive Switching IGBT and Diode: TJ = 125°C, VCC = 400V, IC = 30A RG = 9.1Ω 7, VGG = 15V - Turn-Off Switching Energy 10 Diode Reverse Recovery Time Diode Reverse Recovery Charge Peak Reverse Recovery Current IF = 40A VR = 400V diF/dt = 200A/µs Qrr Irrm 052-6302 Rev A TYPICAL PERFORMANCE CURVES 120 100 80 TJ = 25°C VGE = 15V 120 100 80 60 40 20 0 APT30GS60B_SRDQ2(G) T = 125°C J IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) VGE = 13 & 15V 12V 11V 10V 9V 8V 6V 60 40 20 TJ = 125°C TJ = 150°C 0 0 1 2 3 4 5 6 7 8 VCE(ON), COLLECTER-TO-EMITTER VOLTAGE (V) FIGURE 1, Output Characteristics 250µs PULSE TEST