APT50M38JFLL
500V 88A
S G D
0.038Ω
S
POWER MOS 7
®
R
FREDFET
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching ® losses are addressed with Power MOS 7 by significantly lowering RDS(ON) ® and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. • Lower Input Capacitance • Lower Miller Capacitance • Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current
1
SO
2 T-
27
"UL Recognized"
ISOTOP ®
• Increased Power Dissipation • Easier To Drive • Popular SOT-227 Package • FAST RECOVERY BODY DIODE
APT50M38JFLL
D G S
All Ratings: TC = 25°C unless otherwise specified.
UNIT Volts Amps
500 88 352 ±30 ±40 694 5.56 -55 to 150 300 88 50
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/°C °C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
3600
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
500 0.038 250 1000 ±100 3 5
(VGS = 10V, ID = 44A)
Ohms µA nA Volts
4-2004 050-7030 Rev D
Zero Gate Voltage Drain Current (VDS = 500V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 400V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss C rss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Symbol IS ISM VSD
dv/ dt
APT50M38JFLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 250V ID = 88A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 250V ID = 88A @ 25°C 6 INDUCTIVE SWITCHING @ 25°C VDD = 333V, VGS = 15V ID = 88A, RG = 3Ω 6 INDUCTIVE SWITCHING @ 125°C VDD = 333V VGS = 15V ID = 88A, RG = 3Ω RG = 0.6Ω
Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
MIN
TYP
MAX
UNIT pF
12000 2540 125 270 70 140 17 22 50 4 1295 940 1875 1165
MIN TYP MAX
Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage Peak Diode Recovery
1 2 dt
nC
ns
µJ
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
UNIT Amps Volts V/ns ns µC Amps
88 352 1.3 15
Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C MIN
(Body Diode) (VGS = 0V, IS = -88A)
5
d v/
t rr Q rr IRRM
Reverse Recovery Time (IS = -88A, di/dt = 100A/µs) Reverse Recovery Charge (IS = -88A, di/dt = 100A/µs) Peak Recovery Current (IS = -88A, di/dt = 100A/µs) Characteristic Junction to Case Junction to Ambient
300 600 2.2 9.0 16 33
TYP MAX
THERMAL CHARACTERISTICS
Symbol RθJC RθJA UNIT °C/W
0.18 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
0.20
Z JC, THERMAL IMPEDANCE (°C/W) θ
4 Starting Tj = +25°C, L = 0.93mH, RG = 25Ω, Peak IL = 88A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -ID88A di/dt ≤ 700A/µs VR ≤ 500 TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 10-5 0.1 0.05 10-4 SINGLE PULSE 10 0.3 0.5 Note:
PDM t1 t2 Peak TJ = PDM x ZθJC + TC Duty Factor D = t1/t2
0.9
0.7
050-7030 Rev D
4-2004
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
Typical Performance Curves
RC MODEL
300 15 &10V
ID, DRAIN CURRENT (AMPERES)
APT50M38JFLL
8V 7.5V 7V
Junction temp. ( ”C) 0.0244 0.0731F
250 200 150 100 50 0
Power (Watts)
0.133
0.701F
6.5V
0.0218 Case temperature
20.1F
6V 5.5V
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.4
V
GS
250
VDS> ID (ON) x RDS (ON)MAX. 250 µSEC. PULSE TEST @
很抱歉,暂时无法提供与“APT50M38JFLL”相匹配的价格&库存,您可以联系我们找货
免费人工找货