APT75M50L

APT75M50B2 APT75M50L 500V, 75A, 0.075Ω Max N-Channel MOSFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. T-MaxTM TO-264 APT75M50B2 APT75M50L D Single die MOSFET G S FEATURES • Fast switching with low EMI/RFI • Low RDS(on) • Ultra low Crss for improved noise immunity • Low gate charge • Avalanche energy rated • RoHS compliant TYPICAL APPLICATIONS • PFC and other boost converter • Buck converter • Two switch forward (asymmetrical bridge) • Single switch forward • Flyback • Inverters Absolute Maximum Ratings Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25°C Continuous Drain Current @ TC = 100°C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive 1 Ratings 75 47 230 ±30 1580 37 Unit A V mJ A Thermal and Mechanical Characteristics Symbol PD RθJC RθCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25°C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) 0.22 Package Weight 6.2 10 Torque Mounting Torque ( TO-264Package), 4.40 or M3 screw 1.1 MicrosemiWebsite-http://www.microsemi.com N·m -55 0.11 150 °C 300 Rev D 5-2009 050-8082 Min Typ Max 1040 0.12 Unit W °C/W oz g in·lbf Static Characteristics Symbol VBR(DSS) ΔVBR(DSS)/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ IDSS IGSS TJ = 25°C unless otherwise specified Test Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA VGS = 10V, ID = 37A VGS = VDS, ID = 2.5mA VDS = 500V VGS = 0V TJ = 25°C TJ = 125°C APT75M50B2_L Typ 0.60 0.064 4 -10 Max Unit V V/°C Ω V mV/°C µA nA Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance 3 Min 500 Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current 3 0.075 5 100 500 ±100 VGS = ±30V Dynamic Characteristics Symbol gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf 4 TJ = 25°C unless otherwise specified Test Conditions VDS = 50V, ID = 37A VGS = 0V, VDS = 25V f = 1MHz Parameter Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related Min Typ 55 11600 160 1250 725 Max Unit S pF VGS = 0V, VDS = 0V to 333V 5 Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time VGS = 0 to 10V, ID = 37A, VDS = 250V Resistive Switching VDD = 333V, ID = 37A RG = 2.2Ω 6 , VGG = 15V 365 290 65 130 45 55 120 39 nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD trr Qrr dv/dt Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Min D Typ Max 75 Unit G S A 230 1 695 17 8 V ns µC V/ns ISD = 37A, TJ = 25°C, VGS = 0V ISD = 37A 3 diSD/dt = 100A/µs, TJ = 25°C ISD ≤ 37A, di/dt ≤1000A/µs, VDD = 333V, TJ = 125°C 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 2.31mH, RG = 25Ω, IAS = 37A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.65E-7/VDS^2 + 5.51E-8/VDS + 2.03E-10. Rev D 5-2009 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. 050-8082 APT75M50B2_L 300 V GS 140 = 10V T = 125°C J V GS = 7,8 & 10V 250 ID, DRAIN CURRENT (A) ID, DRIAN CURRENT (A) TJ = -55°C 120 100 6V 200 TJ = 25°C 80 60 40 5V 150 100 50 TJ = 125°C TJ = 150°C 20 4.5V 0 0 5 10 15 20 25 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics 0 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE 2.5 NORMALIZED TO VGS = 10V @ 37A 250 VDS> ID(ON) x RDS(ON) MAX. 250µSEC. PULSE TEST @