APT80GA90B APT80GA90S
900V High Speed PT IGBT
OPOWER MOS 8 is a high speed Punch-Through switch-mode IGBT. Low Eoff is achieved 24 7 through leading technology silicon design and lifetime control processes. A reduced Eoff VCE(ON) tradeoff results in superior efficiency compared to other IGBT technologies. Low gate charge and a greatly reduced ratio of Cres/Cies provide excellent noise immunity, short delay times and simple gate drive. The intrinsic chip gate resistance and capacitance of the APT80GA90B poly-silicone gate structure help control di/dt during switching, resulting in low EMI, even when switching at high frequency. Single die IGBT
®
T
APT80GA90S
D3PAK
FEATURES
• Fast switching with low EMI • Very Low Eoff for maximum efficiency • Ultra low Cres for improved noise immunity • Low conduction loss • Low gate charge • Increased intrinsic gate resistance for low EMI • RoHS compliant
TYPICAL APPLICATIONS
• ZVS phase shifted and other full bridge • Half bridge • High power PFC boost • Welding • UPS, solar, and other inverters • High frequency, high efficiency industrial
Absolute Maximum Ratings
Symbol
Vces IC1 IC2 ICM VGE PD SSOA TJ, TSTG TL
Parameter
Collector Emitter Voltage Continuous Collector Current @ TC = 25°C Continuous Collector Current @ TC = 100°C Pulsed Collector Current Gate-Emitter Voltage
2 1
Ratings
900 145 80 239 ±30 625 239A @ 900V -55 to 150 300
Unit
V
A
V W
Total Power Dissipation @ TC = 25°C Switching Safe Operating Area @ TJ = 150°C Operating and Storage Junction Temperature Range Lead Temperature for Soldering: 0.063" from Case for 10 Seconds
°C
Static Characteristics
Symbol
VBR(CES) VCE(on) VGE(th) ICES IGES
TJ = 25°C unless otherwise specified
Test Conditions
VGE = 0V, IC = 1.0mA VGE = 15V, IC = 47A VCE = 900V, VGE = 0V TJ = 25°C TJ = 125°C 3 TJ = 25°C TJ = 125°C
Parameter
Collector-Emitter Breakdown Voltage Collector-Emitter On Voltage Gate Emitter Threshold Voltage Zero Gate Voltage Collector Current Gate-Emitter Leakage Current
Min
900
Typ
2.5 2.2 4.5
Max
3.1 6 250 1000 ±100
Unit
V
VGE =VCE , IC = 1mA
μA nA
052-6324 Rev B 3 - 2009
VGS = ±30V
Thermal and Mechanical Characteristics
Symbol
RθJC WT Torque
Characteristic
Junction to Case Thermal Resistance Package Weight Mounting Torque (TO-247 Package), 4-40 or M3 screw
Min
-
Typ
5.9
Max
0.2 -
Unit
°C/W g in·lbf
10
Microsemi Website - http://www.microsemi.com
Dynamic Characteristics
Symbol
Cies Coes Cres Qg3 Qge Qgc SSOA td(on) tr td(off) tf Eon2 Eoff6 td(on tr td(off) tf Eon2 Eoff6
TJ = 25°C unless otherwise specified
Test Conditions
Capacitance VGE = 0V, VCE = 25V f = 1MHz Gate Charge VGE = 15V VCE= 450V IC = 47A TJ = 150°C, RG = 4.7Ω4, VGE = 15V, L= 100uH, VCE = 900V Inductive Switching (25°C) VCC = 600V VGE = 15V IC = 47A RG = 4.7Ω4 TJ = +25°C Inductive Switching (125°C) VCC = 600V VGE = 15V IC = 47A RG = 4.7Ω4 TJ = +125°C 18 29 149 85 1652 1389 18 31 192 128 2813 2082 239
APT80GA90B_S
Min Typ
4560 411 62 200 30 72 nC pF
Parameter
Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Emitter Charge Gate- Collector Charge Switching Safe Operating Area Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time Turn-On Switching Energy Turn-Off Switching Energy Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time Turn-On Switching Energy Turn-Off Switching Energy
Max
Unit
A
ns
μJ
ns
μJ
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Pulse test: Pulse Width < 380μs, duty cycle < 2%. 3 See Mil-Std-750 Method 3471. 4 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) 5 Eon2 is the clamped inductive turn on energy that includes a commutating diode reverse recovery current in the IGBT turn on energy loss. A combi device is used for the clamping diode. 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. Microsemi reserves the right to change, without notice, the specifications and information contained herein.
052-6324 Rev B 3 - 2009
Typical Performance Curves
100
V
GE
APT80GA90B_S
350 TJ= 125°C TJ= 150°C IC, COLLECTOR CURRENT (A) 300 250 200 8V 150 100 50 0 7V 6V 5V 15V 13V 10V 9V
= 15V
IC, COLLECTOR CURRENT (A)
TJ= 55°C 80 TJ= 25°C
60
40
20
0
0 1 2 3 4 5 6 VCE, COLLECTOR-TO-EMITTER VOLTAGE (V) FIGURE 1, Output Characteristics (TJ = 25°C) VGE, GATE-TO-EMITTER VOLTAGE (V)
250 μs PULSE TEST
很抱歉,暂时无法提供与“APT80GA90S”相匹配的价格&库存,您可以联系我们找货
免费人工找货