APTGF150SK120TG

APTGF150SK120TG Buck chopper NPT IGBT Power Module VBUS Q1 G1 NTC2 VCES = 1200V IC = 150A @ Tc = 80°C Applicatio n • AC and DC motor control • Switched Mode Power Supplies Features • Non Punch Through (NPT) Fast IGBT® - Low voltage drop - Low tail current - Switching frequency up to 50 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • Internal thermistor for temperature monitoring • High level of integration Benefits • Outstanding performance at high frequency operation • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Solderable terminals both for power and signal for easy PCB mounting • Easy paralleling due to positive TC of VCEsat • Low profile • RoHS compliant Max ratings 1200 200 150 300 ±20 961 300A @ 1200V Unit V A V W APTGF150SK120TG – Rev 1 July, 2006 E1 OUT 0/VBU S SENSE 0/VBU S NTC1 0/VBUS SENSE OUT VBUS 0/VBUS OUT E1 G1 0/VBUS SENSE NT C2 NT C1 Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Tc = 25°C Tc = 80°C Tc = 25°C Tc = 25°C Tj = 150°C Reverse Bias Safe Operating Area These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-5 APTGF150SK120TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions Tj = 25°C VGE = 0 V VCE = 1200V Tj = 125°C Tj = 25°C VGE =15V IC = 150A Tj = 125°C VGE = VCE, IC = 5 mA VGE = ±20V, VCE = 0 V Min Typ Max 350 600 3.7 6.5 ±500 Unit µA V V nA 3.2 3.9 4.5 Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0 V VCE = 25V f = 1MHz Inductive Switching (25°C) VGE = 15V VBus = 600V IC = 150A R G = 5.6Ω Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 150A R G = 5.6Ω VGE = 15V Tj = 125°C VBus = 600V IC = 150A Tj = 125°C R G = 5.6Ω Min Typ 10.2 1.4 0.75 120 50 310 20 130 60 360 30 18 Max Unit nF ns ns mJ 8 Chopper diode ratings and characteristics Symbol Characteristic VRRM IRM IF VF Maximum Peak Repetitive Reverse Voltage Test Conditions Tj = 25°C Tj = 125°C Tc = 70°C Min 1200 Typ Max 350 600 Unit V µA A Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage VR=1200V 200 2 2.3 1.8 420 520 2.5 10.7 2.5 IF = 200A IF = 400A IF = 200A IF = 200A VR = 800V di/dt = 400A/µs V Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C trr Qrr Reverse Recovery Time Reverse Recovery Charge ns µC www.microsemi.com 2-5 APTGF150SK120TG – Rev 1 July, 2006 APTGF150SK120TG Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K Min Typ 50 3952 Max Unit kΩ K RT = R 25   1 1  RT : Thermistor value at T exp B 25 / 85    T − T    25  T: Thermistor temperature Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Thermal and package characteristics Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode Min Typ Max 0.13 0.32 150 125 100 4.7 160 Unit °C/W V °C N.m g RMS Isolation Voltage, any terminal to case t =1 min, I isol