APTGF50DH120TG

APTGF50DH120TG Asymmetrical - Bridge NPT IGBT Power Module V BUS VBUS SENSE Q1 G1 CR3 VCES = 1200V IC = 50A @ Tc = 80°C Applicatio n • Welding converters • Switched Mode Power Supplies • Switched Reluctance Motor Drives Features • Non Punch Through (NPT) Fast IGBT® - Low voltage drop - Low tail current - Switching frequency up to 50 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • Internal thermistor for temperature monitoring • High level of integration Benefits • Outstanding performance at high frequency operation • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Solderable terminals both for power and signal for easy PCB mounting • Easy paralleling due to positive TC o f VCEsat • Low profile • RoHS compliant Max ratings 1200 75 50 150 ±20 312 100A @ 1200V Unit V July, 2006 1-6 APTGF50DH120TG – Rev 2 E1 OUT1 OUT2 Q4 G4 CR2 E4 0/VBUS SENSE NT C1 0/VBUS NT C2 VBUS SENSE G4 E4 OUT2 VBUS 0/VBUS OUT1 E1 G1 0/VBUS SENSE NTC2 NTC1 Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Tc = 25°C Tc = 80°C Tc = 25°C Tc = 25°C Tj = 150°C A V W Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com APTGF50DH120TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0 V Tj = 25°C VCE = 1200V Tj = 125°C Tj = 25°C VGE =15V IC = 50A Tj = 125°C VGE = VCE, IC = 1 mA VGE = 20 V, VCE = 0 V Min Typ Max 250 500 3.7 6.5 100 Unit µA V V nA 3.2 4.0 4.5 Dynamic Characteristics Symbol Cies Coes Cres Qg Qge Qgc Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Gate – Emitter Charge Gate – Collector Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0 V VCE = 25V f = 1MHz VGS = 15V VBus = 600V IC = 50A Inductive Switching (25°C) VGE = 15V VBus = 600V IC = 50A RG = 5 Ω Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 50A RG = 5 Ω VGE = ±15V Tj = 125°C VBus = 600V IC = 50A Tj = 125°C RG = 5 Ω Min Typ 3450 330 220 330 35 200 35 65 320 30 35 65 360 40 6.9 Max Unit pF nC ns ns mJ 3.05 Diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage Test Conditions VR=1200V IF = 100A IF = 200A IF = 100A IF = 100A VR = 800V di/dt =200A/µs Tj = 25°C Tj = 125°C Tc = 70°C Min 1200 Typ Max 250 500 Unit V µA A trr Qrr Reverse Recovery Time Reverse Recovery Charge Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C 420 580 1250 5350 ns nC www.microsemi.com 2-6 APTGF50DH120TG – Rev 2 July, 2006 Tj = 125°C 100 2.0 2.3 1.8 2.5 V APTGF50DH120TG Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode 2500 -40 -40 -40 2.5 Min Typ Max 0.4 0.55 150 125 100 4.7 160 Unit °C/W V °C N.m g RMS Isolation Voltage, any terminal to case t =1 min, I isol