APTGF50SK120TG

APTGF50SK120TG Buck chopper NPT IGBT Power Module VBUS Q1 G1 NTC2 VCES = 1200V IC = 50A @ Tc = 80°C Applicatio n • AC and DC motor control • Switched Mode Power Supplies Features • Non Punch Through (NPT) Fast IGBT® - Low voltage drop - Low tail current - Switching frequency up to 50 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • Internal thermistor for temperature monitoring • High level of integration Benefits • Outstanding performance at high frequency operation • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Solderable terminals both for power and signal for easy PCB mounting • Easy paralleling due to positive TC o f VCEsat • Low profile • RoHS compliant Max ratings 1200 75 50 150 ±20 312 100A @ 1200V Unit V July, 2006 1-6 APTGF50SK120TG – Rev 2 E1 OUT 0/VBU S SENSE 0/VBU S NTC1 0/VBUS SENSE OUT VBUS 0/VBUS OUT E1 G1 0/VBUS SENSE NT C2 NT C1 Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Tc = 25°C Tc = 80°C Tc = 25°C Tc = 25°C Tj = 150°C A V W Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com APTGF50SK120TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0 V Tj = 25°C VCE = 1200V Tj = 125°C Tj = 25°C VGE =15V IC = 50A Tj = 125°C VGE = VCE, IC = 1 mA VGE = 20 V, VCE = 0 V Min Typ Max 250 500 3.7 6.5 100 Unit µA V V nA 3.2 4.0 4.5 Dynamic Characteristics Symbol Cies Coes Cres Qg Qge Qgc Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Gate – Emitter Charge Gate – Collector Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0 V VCE = 25V f = 1MHz VGS = 15V VBus = 600V IC = 50A Inductive Switching (25°C) VGE = 15V VBus = 600V IC = 50A RG = 5 Ω Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 50A RG = 5 Ω VGE = ±15V Tj = 125°C VBus = 600V IC = 50A Tj = 125°C RG = 5 Ω Min Typ 3450 330 220 330 35 200 35 65 320 30 35 65 360 40 6.9 Max Unit pF nC ns ns mJ 3.05 Chopper diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF trr Qrr Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage Test Conditions VR=1200V Tj = 25°C Tj = 125°C Tc = 70°C Min 1200 Typ Max 250 500 Unit V µA A Reverse Recovery Time Reverse Recovery Charge nC www.microsemi.com 2-6 APTGF50SK120TG – Rev 2 IF = 60A VR = 800V di/dt =200A/µs Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C 400 470 1200 4000 ns July, 2006 IF = 60A IF = 120A IF = 60A Tj = 125°C 60 2.0 2.3 1.8 2.5 V APTGF50SK120TG Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode 2500 -40 -40 -40 2.5 Min Typ Max 0.4 0.9 150 125 100 4.7 160 Unit °C/W V °C N.m g RMS Isolation Voltage, any terminal to case t =1 min, I isol