APTGT75A120TG

APTGT75A120TG Phase leg Fast Trench + Field Stop IGBT® Power Module V BUS Q1 G1 NTC2 VCES = 1200V IC = 75A @ Tc = 80°C Applicatio n • Welding converters • Switched Mode Power Supplies • Uninterruptible Power Supplies • Motor control Features • Fast Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • High level of integration • Internal thermistor for temperature monitoring Benefits • Stable temperature behavior • Very rugged • Solderable terminals for easy PCB mounting • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat • Low profile • RoHS Compliant Max ratings 1200 100 75 175 ±20 350 150A@1150V Unit V A V W July, 2006 1-5 APTGT75A120TG – Rev 1 E1 OUT Q2 G2 E2 0/VBU S NTC1 G2 E2 O UT VBUS 0/VBUS OUT E1 G1 E2 G2 NTC2 NTC1 Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation TC = 25°C TC = 80°C TC = 25°C TC = 25°C Tj = 125°C Reverse Bias Safe Operating Area These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com APTGT75A120TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0 V, VCE = 1200V Tj = 25°C VGE =15V IC = 75A Tj = 125°C VGE = VCE , IC = 3 mA VGE = 20V, VCE = 0 V Min 1.4 5.0 Typ 1.7 2.0 Max 250 2.1 6.5 400 Unit µA V V nA Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0 V VCE = 25V f = 1MHz Inductive Switching (25°C) VGE = ±15V VBus = 600V IC = 75A R G = 4.7Ω Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 75A R G = 4.7Ω VGE = ±15V Tj = 125°C VBus = 600V IC = 75A Tj = 125°C R G = 4.7Ω Min Typ 5340 280 240 260 30 420 70 285 50 520 90 7 Max Unit pF ns ns mJ 8.1 Reverse diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF trr Qrr Er Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Energy Test Conditions VR=1200V IF = 75A VGE = 0 V Tj = 25°C Tj = 125°C Tc = 80°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Min 1200 Typ Max 250 500 Unit V µA A di/dt =2000A/µs mJ www.microsemi.com 2-5 APTGT75A120TG – Rev 1 July, 2006 IF = 75A VR = 600V 75 1.6 1.6 170 280 7 14 3 5.5 2.1 V ns µC APTGT75A120TG Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K Min Typ 50 3952 Max Unit kΩ K RT = R 25   1 1  RT : Thermistor value at T exp B 25 / 85    T − T    25  T: Thermistor temperature Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode Min Typ Max 0.35 0.58 150 125 125 4.7 160 Unit °C/W RMS Isolation Voltage, any terminal to case t =1 min, I isol