APTGT75DA120T1G

APTGT75DA120T1G Boost chopper Fast Trench + Field Stop IGBT® Power Module 5 6 11 VCES = 1200V IC = 75A @ Tc = 80°C Application • • • AC and DC motor control Switched Mode Power Supplies Power Factor Correction CR1 Q2 CR2 9 10 1 2 3 4 Features NTC • 12 • • • Benefits • • • • • • Fast Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated Very low stray inductance Internal thermistor for temperature monitoring High level of integration Outstanding performance at high frequency operation Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Solderable terminals both for power and signal for easy PCB mounting Low profile RoHS Compliant Pins 1/2 ; 3/4 ; 5/6 must be shorted together Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area TC = 25°C TC = 80°C TC = 25°C TC = 25°C Tj = 125°C Max ratings 1200 110 75 175 ±20 357 150A @ 1150V Unit V August, 2007 1–5 APTGT75DA120T1G – Rev 0 A V W These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com APTGT75DA120T1G All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25°C VGE =15V IC = 75A Tj = 125°C VGE = VCE , IC = 3 mA VGE = 20V, VCE = 0V Min 1.4 5.0 Typ 1.7 2.0 Max 250 2.1 6.5 400 Unit µA V V nA Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0V VCE = 25V f = 1MHz Inductive Switching (25°C) VGE = ±15V VBus = 600V IC = 75A RG = 4.7Ω Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 75A RG = 4.7Ω VGE = ±15V Tj = 125°C VBus = 600V IC = 75A Tj = 125°C RG = 4.7Ω Min Typ 5340 280 240 260 30 420 70 285 50 520 90 7 mJ 8.1 Max Unit pF ns ns Chopper diode ratings and characteristics Symbol Characteristic VRRM IRM IF VF trr Qrr Er Maximum Peak Repetitive Reverse Voltage Test Conditions Tj = 25°C Tj = 125°C Tc = 80°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Min 1200 Typ Max 250 500 Unit V µA A Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Energy VR=1200V IF = 100A 100 1.6 1.6 170 280 9 18 5 9 2.1 V August, 2007 2–5 APTGT75DA120T1G – Rev 0 ns µC mJ IF = 100A VR = 600V di/dt =2000A/µs www.microsemi.com APTGT75DA120T1G Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode 2500 -40 -40 -40 2.5 Min Typ Max 0.35 0.48 150 125 100 4.7 80 Unit °C/W RMS Isolation Voltage, any terminal to case t =1 min, I isol