APTGT75SK120D1
Buck Chopper
VCES = 1200V
IC = 75A @ Tc = 80°C
®
Trench IGBT Power Module
Application
• AC and DC motor control
• Switched Mode Power Supplies
3
4
1
2
3
2
1
4
5
7
6
Benefits
• Outstanding performance at high frequency
operation
• Stable temperature behavior
• Very rugged
• Direct mounting to heatsink (isolated package)
• Low junction to case thermal resistance
• Easy paralleling due to positive TC of VCEsat
Absolute maximum ratings
Symbol
VCES
Parameter
Collector - Emitter Breakdown Voltage
IC
Continuous Collector Current
ICM
VGE
PD
Pulsed Collector Current
Gate – Emitter Voltage
Maximum Power Dissipation
SCSOA
Short Circuit Safe Operating Area
TC = 25°C
Max ratings
1200
110
75
175
±20
357
Tj = 125°C
300A@900V
TC = 25°C
TC = 80°C
TC = 25°C
Unit
V
A
V
W
January, 2004
5
Features
• Trench + Field Stop IGBT® Technology
- Low voltage drop
- Low tail current
- Switching frequency up to 20 kHz
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- Avalanche energy rated
- RBSOA and SCSOA rated
• Kelvin emitter for easy drive
• Low stray inductance
- M5 power connectors
• High level of integration
These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed.
APT website – http://www.advancedpower.com
1-3
APTGT75SK120D1 – Rev 0
Q1
APTGT75SK120D1
All ratings @ Tj = 25°C unless otherwise specified
VCE(on)
Collector Emitter on Voltage
VGE(th)
IGES
Gate Threshold Voltage
Gate – Emitter Leakage Current
Dynamic Characteristics
Symbol
Cies
Coes
Cres
Td(on)
Tr
Td(off)
Tf
Td(on)
Tr
Td(off)
Tf
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Reverse diode ratings and characteristics
Symbol Characteristic
VF
Diode Forward Voltage
Erec
Reverse Recovery Energy
Qrr
Reverse Recovery Charge
Test Conditions
VGE = 0V, IC = 3mA
VGE = 0V, VCE = 1200V
Tj = 25°C
VGE = 15V
IC = 75A
Tj = 125°C
VGE = VCE , IC = 3mA
VGE = 20V, VCE = 0V
Test Conditions
VGE = 0V
VCE = 25V
f = 1MHz
Inductive Switching (25°C)
VGE = ±15V
VBus = 600V
IC = 75A
RG = 4.7Ω
Inductive Switching (125°C)
VGE = ±15V
VBus = 600V
IC = 75A
RG = 4.7Ω
Test Conditions
IF = 75A
VGE = 0V
IF = 75A
VR = 600V
di/dt =600A/µs
IF = 75A
VR = 600V
di/dt =600A/µs
TJ
TSTG
TC
Torque
Wt
Junction to Case
RMS Isolation Voltage, any terminal to case t =1 min,
I isol
很抱歉,暂时无法提供与“APTGT75SK120D1G”相匹配的价格&库存,您可以联系我们找货
免费人工找货