C900503

PLANAR TRANSCEIVERS TM ® Fixed Frequency MDU1020 Series Features       Low cost Small and Flat Profile Rugged, Reliable Construction Low Power Consumption High Sensitivity Meet FCC Part 15 reqts. Description The MDU (Motion Detector Unit) is an X-Band microwave transceiver that utilizes the Doppler shift phenomenon to "sense" motion. The unit is available with either of two physically interchangeable forms; A rugged cast metal housing or a lightweight plastic housing. The circuit features a dielectric resonator stabilized FET oscillator, which provides stable operation over a broad temperature range in either CW or low duty cycle pulse mode and a balanced mixer for enhanced sensitivity and reliability. Applications       Intrusion Alarms (Room, Vehicle) Automatic Door Openers Speed Measurement Collision Avoidance Traffic Control Presence Sensing This document only gives a general description of the product and shall not form part of any contract. Microwave Solutions pursue a policy of continuous product improvement and reserve the right from time to time to amend the specifications of products. Copyright  2008 Rev: 2009-02-10 Microsemi Microwave Products Page 1 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 PLANAR TRANSCEIVERS TM ® Fixed Frequency Operation MDU1020 Series The basic principle of operation consists of detecting the frequency shift between a transmitted and a received signal reflected back from a moving object within the field of view of the unit. The unit produces a low level output signal which can be amplified and processed to provide an audible or visual alarm signal and employs low cost surface mount manufacturing techniques which are field proven as being rugged and reliable. Electrical Characteristics Transmitter Frequency Frequency Setting Accuracy Power Output (Min.) Operating Voltage Operating Current (CW) Harmonic Emissions Pulse Mode Operation Average Current (5% DC) : Pulse Width (Min.) : Duty Cycle (Min.) : Receiver Sensitivity (10dB S/N ratio) : : Noise (Both in 3Hz to 80Hz bandwidth) Antenna Gain : -3dB Beamwidth E Plane : H Plane : Mechanical Characteristics Weight : Tab Connections : Environmental Characteristics Power/Temp. Coefficient (over operating temp. range) : Frequency/Temp. Coefficient (over operating temp. range) : : Operating Temperature Storage Temperature : : : : : : : : see table 3MHz 13dBm EIRP +5V ±0.25V 60mA max. 40mA typ. < -7dBm 2mA typ. 5µSec 1% -86dBm 10µV 8dBi 72º 36º see table 0.1” spacing 3dB 6.5MHz -10ºC to +55ºC -30ºC to +70ºC NOTES Detection range is dependent on size and reflectivity of target and S/N ratio Doppler shift at 10.687GHz is 31Hz/m.p.h. Unit functions over -30ºC to +70ºC but harmonics may exceed specified levels. Model MDU1020 Application USA, Canada etc. USA, Canada etc. Order Code C900505 C900503 C900506 C900605 C900603 C900606 Frequency 10.515GHz 10.525Ghz 10.535GHz 10.515GHz 10.525Ghz 10.535GHz Weight 80 grams Comments USA FCC Part 15 Indoors Metal Housing USA FCC Part 15 Indoors Plastic Housing MDU1020 15 grams Copyright  2008 Rev: 2009-02-10 Microsemi Microwave Products Page 2 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748