CDLL5711

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com SCHOTTKY BARRIER DIODES – LEADLESS PACKAGE FOR SURFACE MOUNT – METALLURGICALLY BONDED – DOUBLE PLUG CONSTRUCTION Qualified per MIL-PRF-19500/444 DEVICES QUALIFIED LEVELS 1N5711UR-1 1N5712UR-1 1N6857UR-1 1N6858UR-1 CDLL2810 CDLL5711 CDLL5712 CDLL6263 CDLL6857 CDLL6858 JAN JANTX JANTXV MAXIMUM RATING AT 25°C Operating Temperature: Storage Temperature: Operating Current: -65°C to +150°C -65°C to +150°C 5711 & 6263 types 2810, 5712 & 6858 types 6857 type all types :33mA dc @ TEC = +140°C :75mA dc @ TEC = +130°C :150mA dc @ TEC = +110°C :Derate to 0 (zero) mA dc @ +150°C Derating: ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MINIMUM BEAKDOWN VOLTAAGE VBR @ 10μA MAXIMUM FORWARD VOLTAGE VF @ 1mA MAXIMUM FORWARD VOLTAGE VF @ I F MAXIMUM REVERSE LEAKAGE CURRENT I R @ VR MAXIMUM CAPACITANCE @ VR = 0 VOLTS f = 1.0MHz CT ESDS CLASS TYPE NUMBER FIGURE 1 VOLTS 1N5711UR-1 1N5712UR-1 1N6857UR-1 1N6858UR-1 CDLL2810 CDLL5711 CDLL5712 CDLL6263 CDLL6857 CDLL6858 NOTE: 70 20 20 70 20 70 20 60 20 70 VOLTS 0.41 0.41 0.35 0.36 0.41 0.41 0.41 0.41 0.35 0.36 VOLTS @ mA 1.0 @ 15 1.0 @ 35 0.75 @ 35 0.65 @ 15 1.0 @ 35 1.0 @ 15 1.0 @ 35 1.0 @ 15 0.75 @ 35 0.65 @ 15 nA 200 150 150 200 100 200 150 200 150 200 VOLTS 50 16 16 50 15 50 16 50 16 50 PICO FARADS 2.0 2.0 4.5 4.5 2.0 2.0 2.0 2.2 4.5 4.5 1 1 2 2 1 1 1 1 2 2 1. 2. Effective Minority Carrier Lifetime (τ) is 100 Pico Seconds Qualification testing to J, JX, JV and JS levels for 6857 and 6858 types is underway. Contact the factory for qualification completion dates. These two part numbers are being introduced by CDI as “drop-in” replacements for the 5711 and 5712. They provide a more robust mechanical design and a higher ESDS class with the only trade-off being an increase in capacitance. T4-LDS-0041 Rev. 1 (100246) Page 1 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com GRAPHS FIGURE 1 FIGURE 2 I – V Curve Showing Typical Forward Voltage Variation with Temperature for the CDLL2810 and CDLL5712 Schottky Diodes. CDLL2810 and CDLL5712 Typical Variation of Reverse Current (IR) vs. Reverse Voltage (VR) at Various Temperatures FIGURE 3 FIGURE 4 I – V Curve Showing Typical Forward Voltage Variation with Temperature for Schottky Diode CDLL5711. CDLL5711 Typical; Variation of Reverse Current (IR); vs. ReverseVoltage (VR) at Various Temperatures. FIGURE 5 Typical Dynamic Resistance (RD) vs. Forward Current Current (IF) T4-LDS-0041 Rev. 1 (100246) Page 2 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com PACKAGE DIMENSIONS NOTE: 1. Dimensions are in inches. Millimeters are given for general information only. 2. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. Symbol BD BL ECT S Dimensions Inches Millimeters Min Max Min Max .063 .067 1.60 1.70 .130 .146 3.30 3.71 .016 .022 0.41 0.55 .001 Min Notes DESIGN DATA CASE: DO-213AA, Hermetically sealed glass case. (MELF, SOD-80, LL34) LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (RθJEC): 100°C/W maximum at L = 0 inch THERMAL IMPEDANCE: (ZθJX): 40°C/W maximum. POLARITY: Cathode end is banded. MOUNTING POSITION SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6PPM/°C. The COE of the Mounting Surface System should be selected to provide a suitable match with this device. T4-LDS-0041 Rev. 1 (100246) Page 3 of 3