CPT60035D

Schottky PowerMod CPT60035 - CPT60045 A Dim. Inches R G Baseplate A=Common Anode B Q N W Baseplate Common Cathode F U U C Baseplate D=Doubler H V E Microsemi Catalog Number Industry Part Number CPT60035* CPT60040* CPT60045* MBRP60035CTL Notes: Baseplate: Nickel plated copper Min. A B C E F G H N Q R U V W --3.630 0.800 0.700 0.680 --0.130 0.120 0.510 0.490 1.375 BSC --0.010 ----0.290 0.275 3.150 BSC 0.600 --0.312 0.340 0.180 0.195 Min. Max. --92.20 17.78 20.32 --17.28 3.30 3.05 12.45 12.95 34.92 BSC --0.25 ----6.99 7.37 80.01 BSC 15.24 --7.92 8.64 4.57 4.95 Notes 1/4-20 Dia. Dia. Schottky Barrier Rectifier Working Peak Repetitive Peak Reverse Voltage Reverse Voltage Guard Ring Protection 600 Amperes/35 to 45 Volts 35V 40V 45V 35V 40V 45V Max. Millimeters 175°C Junction Temperature Reverse Energy Tested ROHS Compliant *Add Suffix A for Common Anode, D for Doubler Electrical Characteristics I F(AV) 600 Amps Average forward current per pkg I F(AV) 300 Amps Average forward current per leg I FSM 6000 Amps Maximum surge current per leg Maximum repetitive reverse current per leg I R(OV) 2 Amps VFM 0.65 Volts Max peak forward voltage per leg VFM 0.52 Volts Max peak forward voltage per leg I RM 75 mA Max peak reverse current per leg I RM 8.0 mA Max peak reverse current per leg CJ 14000 pF Typical junction capacitance per leg TC = 139°C, Square wave, R0JC = 0.10°C/W TC = 139°C, Square wave, R0JC = 0.20°C/W 8.3ms, half sine,T J = 175°C f = 1 KHZ, 25°C, 1µsec square wave I FM = 300A:T J = 25°C I FM = 300A:T J = 175°C VRRM, TJ = 125°C* VRRM, TJ = 25°C VR = 5.0V,T C = 25°C *Pulse test: Pulse width 300µsec, Duty cycle 2% Thermal and Mechanical Characteristics Storage temp range Operating junction temp range Max thermal resistance per leg Max thermal resistance per pkg Typical thermal resistance (greased) Terminal Torque Mounting Base Torque (outside holes) Mounting Base Torque (center hole) center hole must be torqued first Weight T STG TJ R OJC R OJC R OCS -55°C to 175°C -55°C to 175°C 0.20°C/W Junction to case 0.10°C/W Junction to case 0.08°C/W Case to sink 35-40 inch pounds 30-40 inch pounds 8-10 inch pounds 2.8 ounces (78 grams) typical www.microsemi.com September, 2014 - Rev. 6 CPT60035 - CPT60045 Figure 1 Typical Forward Characteristics - Per Leg Figure 3 Typical Junction Capacitance - Per Leg 10,000 Junction Capacitance - pF 100,000 1000 10,000 1000 0.1 0.5 1.0 5.0 10 50 100 150 C Figure 4 25 C Forward Current Derating - Per Leg 180 Maximum Allowable Case Temperature Instantaneous Forward Current - Amperes Reverse Voltage - Volts 100 10 0 0.2 0.4 0.6 0.8 1.0 1.2 170 160 150 140 130 120 110 90 0 100 120 200 DC 180 300 400 500 Average Forward Current - Amperes 1.4 Instantaneous Forward Voltage - Volts Figure 5 Figure 2 Typical Reverse Characteristics - Per Leg Maximum Forward Power Dissipation - Per Leg 350 100 Maximum Power Disipation - Watts Typical Reverse Current - mA 1000 175 C 10 125 C 1.0 0.1 75 C .01 25 C 0 10 20 Reverse Voltage - Volts 30 40 50 300 250 DC 200 150 90 120 180 100 50 0 0 100 200 300 400 500 Average Forward Current - Amperes www.microsemi.com September, 2014 - Rev. 6 DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.