GG71420

GG71420 TM ® ABSORPTIVE SPST SWITCH with TTL Driver RoHS Compliant DESCRIPTION Microsemi – Lowell’s switch modules provide an economical way of achieving a switch function from UHF through Ku band. These switch modules provide broadband, high performance characteristics in a small package. Our catalog parts are basic examples of our capability. We will be glad to explore your specific requirements with the goal of providing custom parts for your needs. KEY FEATURES  Multi Octave Frequency www.MICROSEMI.com Ranges  Hermetically Sealed  Coaxial Connections  Consistent VSWR This series of modules meets RoHS requirements per EU Directive 2002/95/EC. The standard terminal finish is gold unless otherwise specified. Consult the factory if you have special requirements.  Internal TTL Driver  RoHS Compliant IMPORTANT: For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com These devices are ESD sensitive and must be handled use using ESD precautions. ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Storage Temperature Operating Temperature RF CW Power Handling Symbol TSTG TOP PCW Value -55 to +125 -55 to +95 0.5 Unit ºC ºC W APPLICATIONS/BENEFITS  Coax Assembly  Broadband (0.5 – 18 GHz) GG71420 GG71420 Copyright  2006 Rev.: 2009-02-02 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 1 GG71420 TM ® ABSORPTIVE SPST SWITCH with TTL Driver RoHS Compliant GUARANTEED ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Model Number GG71420-01 GG71420-02 GG71420-03 GG71420-04 GG71420-05 Frequency Range 0.5 - 4.0 2.0 - 8.0 4.0 - 12.4 8.0 - 18.0 2.0 - 18.0 Ins. Loss (dB) (Max) 1.7 2.1 2.4 2.9 2.9 Isolation (dB) (Min) 55 50 45 45 45 VSWR (Max) 1.5:1 1.7:1 1.8:1 1.9:1 2.0:1 SWITCHING SPEED (uS) (Max) www.MICROSEMI.com 1.0 1.0 1.0 1.0 1.0 Notes: 1. RF Power Handling: 0.5W CW. 2. Switching Speed is measured from the 50% point of the TTL pulse to the 90/10% of the detected RF pulse with a 100 KHz maximum switching rate. 3. Required D.C.Bias: +5V @75mA (max) and -8 to -15 volts @ 50mA (max) 4. Logic: TTL “0" = loss; TTL “1" = isolation 5. In the isolation state the switch is matched at J1 input only. ENVIRONMENTAL These units are designed to withstand the following environmental conditions without damage. ENVRONMENTAL CONDITIONS TEST Internal Visual Stabilization Bake Thermal Cycle Constant Acceleration Burn In Humidity External Visual MIL-PRF METHOD CONDITION 883 883 883 883 883 202 883 2017 1008 1010 2001 1015 103B 2009 -B B 1 (Y1 Axis) 125 ºC B -- OUTLINE 210059 NOTES Notes: 1. All pins are .025 ±.001" dia., .100" (min) long. 2. Tolerances: .xxx .010" .xx .020" 3. Leads gold plated per MIL-G-45204, Type 3, Grade A 50 µinch (min). 4. Case finish: Epoxy Paint, Grey #36231. 5. Other packaging available on special order. ELEC / MECH ELEC / MECH Copyright  2006 Rev.: 2009-02-02 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 2