GG72220-03

GG72220 TM ® ABSORPTIVE SPDT SWITCH MODULES with TTL Driver RoHS Compliant DESCRIPTION Microsemi – Lowell’s switch modules provide an economical way of achieving a switch function from UHF through Ku band. These switch modules provide broadband, high performance characteristics in a small package. Our catalog parts are basic examples of our capability. We will be glad to explore your specific requirements with the goal of providing custom parts for your needs. KEY FEATURES  Multi Octave Frequency www.MICROSEMI.com Ranges  Hermetically Sealed  Microstrip/Stripline Compatible  Consistent VSWR This series of modules meets RoHS requirements per EU Directive 2002/95/EC. The standard terminal finish is gold unless otherwise specified. Consult the factory if you have special requirements.  Internal TTL Driver  RoHS Compliant IMPORTANT: For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com These devices are ESD sensitive and must be handled use using ESD precautions. ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Storage Temperature Operating Temperature RF CW Power Handling Symbol TSTG TOP PCW Value -55 to +125 -55 to +95 0.5 Unit ºC ºC W APPLICATIONS/BENEFITS  Drop in Module  Broadband (0.5 – 18 GHz) GG72220 GG72220 Copyright  2006 Rev.: 2009-02-02 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 1 GG72220 TM ® ABSORPTIVE SPDT SWITCH MODULES with TTL Driver RoHS Compliant GUARANTEED ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Model Number GG72220-01 GG72220-02 GG72220-03 GG72220-04 GG72220-05 Frequency Range 0.5 - 4.0 2.0 - 8.0 4.0 - 12.4 8.0 - 18.0 2.0 - 18.0 Insertion Loss1 (dB) (Max) 1.7 2.1 2.4 2.9 2.9 Isolation(dB) (Min) 60 55 50 40 40 VSWR (Max) 1.7:1 1.7:1 1.8:1 1.9:1 2.0:1 SWITCHING 2 SPEED (uS) TRISE (Max) TFALL (Max) www.MICROSEMI.com 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Notes: 1. RF Power Handling; .5W CW. 2. Switching Speed: 1.0µS (max). 3. Required D.C. Bias: +5v @ +75mA (max) and -8 to -15v @ -50mA (max) 4. Switching Speed is measured from the 50% point of the TTL pulse to the 90%-10% of the detected RF pulse with a 100 kHz maximum switching rate. 5. Temperature Rating: Operating, -55 to +95°C; Storage, -55 to =125°C. 6. Only the switched arms, J1 & J2 are matched in the isolated state. The common arm is matched only when one path is in the loss state. ENVIRONMENTAL These units are designed to withstand the following environmental conditions without damage. ENVRONMENTAL CONDITIONS TEST Internal Visual Stabilization Bake Thermal Cycle Constant Seal – Fine Leak Seal – Gross Leak External Visual MIL-PRF METHOD CONDITION 883 883 883 883 883 883 883 2017 1008 1010 2001 1014 1014 2009 -B B 1 (Y1 Axis) A1 C1 -- OUTLINE 210015 NOTES 1. All pins are 0.012 ±0.001" dia, 0.100" (min) long. May be supplied with tabs, 0.025 ±0.01 x 0.006 ±0.002, upon request. 2. Tolerance on 3 place decimal, ±0.003" unless otherwise specified. 3. Case and leads gold plated per MIL-G-45204, Type 3, Grade A 50 µinch (min). ELEC / MECH ELEC / MECH Copyright  2006 Rev.: 2009-02-02 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 2