LC54

LC6.5 thru LC170A, e3 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION DESCRIPTION This hermetically sealed Transient Voltage Suppressor (TVS) product family includes a rectifier diode element in series and opposite direction to achieve low capacitance performance below 100 pF (see Figure 2). The low level of TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With virtually instantaneous response, they also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel in opposite directions (anti-parallel) for complete ac protection as shown in Figure 4. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE W WW . Microsemi . C OM DO-13 (DO-202AA) FEATURES • • • • • • Unidirectional low-capacitance TVS series for flexible thru-hole mounting (for bidirectional see Figure 4) Suppresses transients up to 1500 watts @ 10/1000 µs (see Figure 1)* Clamps transient in less than 100 pico seconds Working voltage (VWM) range 6.5 V to 170 V Hermetic sealed DO-13 metal package Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, MSP prefixes respectively to part numbers, e.g. MXLC6.5A, etc. Surface mount equivalent packages also available as SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 SMCGLCE170A in separate data sheet (consult factory for other surface mount options) Plastic axial-leaded equivalents available in the LCE6.5 - LCE170A series in separate data sheet RoHS Compliant devices available by adding “e3” suffix • • • APPLICATIONS / BENEFITS Protection from switching transients and induced RF Low capacitance for data line protection up to 1 MHz Protection for aircraft fast data rate lines up to Level 5 Waveform 4 and Level 2 Waveform 5A in RTCA/DO160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1) ESD & EFT protection per IEC 61000-4-2 and -4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: Class 2: Class 3: Class 4: LC6.5 to LC170A LC6.5 to LC150A LC6.5 to LC70A LC6.5 to LC36A • • • • Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 : Class 2: Class 3: Class 4: LC6.5 LC6.5 LC6.5 LC6.5 to LC90A to LC45 A to LC22A to LC11A • • • Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: LC6.5 to LC20A Class 3: LC6.5 to LC10A • Inherently radiation hard per Microsemi MicroNote 050 MAXIMUM RATINGS • 1500 Watts at 10/1000 μs with repetition rate of 0.01% or o less* at lead temperature (TL) 25 C (see Figs. 1, 2, & 4) o o • Operating & Storage Temperatures: -65 to +175 C o • THERMAL RESISTANCE: 50 C/W (Typical) junction to lead at 0.375 inches (10 mm) from body or 110 oC/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm • DC Power Dissipation*: 1 Watt at TL < +125oC 3/8” (10 mm) from body (see derating in Fig 3 and note below) • Solder Temperatures: 260 o C for 10 s (maximum) MECHANICAL AND PACKAGING • CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass • FINISH: All external metal surfaces are Tin-Lead plated and solderable per MIL-STD-750 method 2026 • POLARITY: Cathode connected to case as shown by diode symbol (cathode positive for normal operation) • MARKING: Part number and polarity diode symbol • WEIGHT: 1.4 grams. (Approx) • TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number) • See package dimension on last page LC6.5 thru LC170A * TVS devices are not typically used for dc power dissipation and are instead operated < VWM (rated standoff voltage) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region) of the TVS element. Also see Figures 3 and 4 for further protection details in rated peak pulse power for unidirectional and bidirectional configurations respectively. Copyright © 2008 10-29-2008 REV E Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 LC6.5 thru LC170A, e3 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION ELECTRICAL CHARACTERISTICS @ 25oC BREAKDOWN VOLTAGE REVERSE STANDOFF VOLTAGE MAXIMUM STANDBY CURRENT MAXIMUM CLAMPING VOLTAGE MAXIMUM PEAK PULSE CURRENT MAXIMUM CAPACITANCE WORKING INVERSE BLOCKING VOLTAGE INVERSE BLOCKING LEAKAGE CURRENT PEAK INVERSE BLOCKING VOLTAGE VOLTS W WW . Microsemi . C OM MICROSEMI PART NUMBER LC6.5 LC6.5A LC7.0 LC7.0A LC7.5 LC7.5A LC8.0 LC8.0A LC8.5 LC8.5A LC9.0 LC9.0A LC10 LC10A LC11 LC11A LC12 LC12A LC13 LC13A LC14 LC14A LC15 LC15A LC16 LC16A LC17 LC17A LC18 LC18A LC20 LC20A LC22 LC22A LC24 LC24A LC26 LC26A LC28 LC28A LC30 LC30A LC33 LC33A LC36 LC36A LC40 LC40A LC43 LC43A LC45 LC45A LC48 LC48A LC51 LC51A VWM VOLTS 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 V(BR) VOLTS @ MAX ID @VWM μA 1000 1000 500 500 250 250 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VC @ IPP VOLTS 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.4 53.5 48.4 58.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 MIN 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.1 58.9 69.3 62.7 I(BR) mA 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 IPP @ 10/1000 µs @ 0 Volts, f = 1 MHz pF 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 VWIB VOLTS 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 150 150 150 150 150 150 150 150 IIB @ VWIB µA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 AMPS 100 100 100 100 100 100 100 100 94 100 89 97 80 88 74 82 68 75 63 70 58 65 56 61 52 57 49 54 46 51 42 46 38 42 35 39 32 36 30 33 28 31 25.4 28.1 23.3 25.8 21.0 23.3 19.5 21.6 18.7 20.6 17.5 19.4 16.5 18.2 VPIB VOLTS 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 Page 2 LC6.5 thru LC170A Copyright © 2008 10-29-2008 REV E Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 LC6.5 thru LC170A, e3 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION BREAKDOWN VOLTAGE REVERSE STANDOFF VOLTAGE MAXIMUM STANDBY CURRENT MAXIMUM CLAMPING VOLTAGE MAXIMUM PEAK PULSE CURRENT CAPACITANCE VWIB IIB @ VWIB VWM I(BR) VPIB 10/1000 µs VOLTS VOLTS VOLTS μA pF AMPS VOLTS µA VOLTS mA MIN MAX 200 10 150 100 15.6 96.3 5 1 73.3 60.0 54 LC54 200 10 150 100 17.2 87.1 5 1 66.3 60.0 54 LC54A 200 10 150 100 14.6 103.0 5 1 78.7 64.4 58 LC58 200 10 150 100 16.0 93.6 5 1 71.2 64.4 58 LC58A 200 10 150 90 14.0 107.0 5 1 81.5 66.7 60 LC60 200 10 150 90 15.5 96.8 5 1 73.7 66.7 60 LC60A 200 10 150 90 13.2 114.0 5 1 86.9 71.1 64 LC64 200 10 150 90 14.6 103.0 5 1 78.6 71.1 64 LC64A 200 10 150 90 12.0 125 5 1 95.1 77.8 70 LC70 200 10 150 90 13.3 113 5 1 86.0 77.8 70 LC70A 200 10 150 90 11.2 134 5 1 102.0 83.3 75 LC75 200 10 150 90 12.4 121 5 1 92.1 83.3 75 LC75A 200 10 150 90 10.6 142 5 1 108 88.7 80 LC80 200 10 150 90 11.6 129 5 1 98.0 88.7 80 LC80A 200 10 300 90 9.4 160 5 1 122 100 90 LC90 200 10 300 90 10.3 146 5 1 111 100 90 LC90A 200 10 300 90 8.4 179 5 1 136 111 100 LC100 200 10 300 90 9.3 162 5 1 123 111 100 LC100A 400 10 300 90 7.7 196 5 1 149 122 110 LC110 400 10 300 90 8.4 178 5 1 135 122 110 LC110A 400 10 300 90 7.0 214 5 1 163 133 120 LC120 400 10 300 90 7.8 193 5 1 147 133 120 LC120A 400 10 300 90 6.5 231 5 1 176 144 130 LC130 400 10 300 90 7.2 209 5 1 159 144 130 LC130A 400 10 300 90 5.6 268 5 1 204 167 150 LC150 400 10 300 90 6.2 243 5 1 185 167 150 LC150A 400 10 300 90 5.2 287 5 1 218 178 160 LC160 400 10 300 90 5.8 259 5 1 197 178 160 LC160A LC170 170 189 231 1 5 304 4.9 90 300 10 400 LC170A 170 189 209 1 5 275 5.4 90 300 10 400 NOTE: TVS are normally selected according to the reverse “Standoff Voltage” (VWM) that should be equal to or greater than the dc or continuous peak operating voltage level. MICROSEMI PART NUMBER V(BR) @ ID @VWM VC @ IPP IPP @ @0 Volts WORKING INVERSE BLOCKING VOLTAGE INVERSE BLOCKING LEAKAGE CURRENT PEAK INVERSE BLOCKING VOLTAGE VOLTS W WW . Microsemi . C OM GRAPHS LC6.5 thru LC170A FIGURE 1 Peak Pulse Power vs. Pulse Time (tW) in μs Copyright © 2008 10-29-2008 REV E Pulse Time (tw) in μs Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 LC6.5 thru LC170A, e3 1500 WATT LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION SCHEMATIC APPLICATIONS The TVS low capacitance device configuration is shown in Figure 2. As a further option for unidirectional applications, an additional low capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 3. In applications where random high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating than the TVS clamping voltage VC. The Microsemi recommended rectifier part number is the “LCR80” for the application in Figure 5. If using two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the reverse of each rectifier diode) is also provided. The unidirectional and bidirectional configurations in Figure 3 and 4 will both result in twice the capacitance of Figure 2. W WW . Microsemi . C OM FIGURE 2 TVS with internal Low Capacitance Diode FIGURE 3 Optional Unidirectional configuration (TVS and separate rectifier diode) in parallel) FIGURE 4 Optional Bidirectional configuration (two TVS devices in anti-parallel) PACKAGE DIMENSIONS LC6.5 thru LC170A DO-13 (or DO-202AA) Copyright © 2008 10-29-2008 REV E Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4