LSP1012

LSP1000 – LSP1012 TM ® ENHANCED PERFORMANCE SURFACE MOUNT EPSM® PIN Diodes RoHS Compliant DESCRIPTION The LSP series of Enhanced Performance Surface Mount (EPSM) PIN diodes offers the circuit designer a higher level of quality in a commercially priced package. Choose from LSP1000, LSP1004, and LSP1008 for switching applications, LSP1002, LSP1005, LSP1010 and LSP1011 for low distortion attenuation from VHF through 5 GHz. They are available in a host of configurations (see configuration table for internal wiring.) The LSP products are supplied with a RoHS compliant gold finish. Other configurations are available - consult factory for details. When ordering specify configuration (example: LSP1004-454-4 is a common cathode dual pin). KEY FEATURES  Low Cost  High Performance  Surface Mount  Available on Tape  Multiple Configurations to Choose From  RoHS Compliant 1 www.MICROSEMI.com APPLICATIONS Specify EPSM package style 450A or 454. For 3 terminal style 454, refer to configuration page. Example: LSP1001-454-4 is a common cathode pair of PIN diodes for broadband switching applications; for the 2 terminal style 450A, refer to the outline dimension table. Example: LSP1001-450A is a single device with a 0.075 x 0.050 outline. APPLICATIONS/BENEFITS  High Performance Wireless Surface Mount Options for GSM, TAGS, WANS, PCS  Wideband Switching  Broadband Attenuators ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Maximum Leakage Current @80% of Minimum Rated VB Storage Temperature Operating Temperature Power Dissipation Forward Current (1uS Pusle) Symbol IR TSTG TOP PD IF Value 50 -65 to +125 -65 to +125 500 1 Unit nA  Phase Shifters  Broadband Limiters LSP1000-LSP1012 ºC ºC mW A IMPORTANT: For the most current data, consult our website: www.MICROSEMI.com Specifications are subject to change, consult factory for the latest information. These devices are ESD sensitive and must be handled using ESD precautions. 1 The EPSM products are supplied with a RoHS complaint Gold finish . Copyright  2007 Rev: 2009-09-10 Microsemi Microwave Products Page 1 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 LSP1000 – LSP1012 TM ® ENHANCED PERFORMANCE SURFACE MOUNT EPSM® PIN Diodes RoHS Compliant EPSM PIN Diodes . ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Model Number LSP1000 LSP1002 LSP1004 LSP1011 LSP1012 VB(V) IR=10μA (Min) 35 100 35 200 20 CT(pF)1 @VR (Max) 0.28 0.32 0.75 0.35 0.35 www.MICROSEMI.com VR (V) 5 50 20 50 10 RS(Ohms)2 @IF(Max) 2.5 4.0 0.6 2.0 1.8 IF(mA) 5 100 10 100 10 TL(nS)3 (Typ) 80 1500 150 2000 5 Application Switch Attenuator Switch Attenuator Limiter Notes 1. 2. 3. Capacitance (CT) is measured at f = 1 MHz Series Resistance (RS) is measured at f = 100 MHz a. The LSP1012 is measured at f = 1GHz Carrier Lifetime (TL) is measured at IF = 10 mA, IR = 6 mA TYPICAL PINOUT FOR 454-X PACKAGE STYLE 454-0 454-1 454-2 454-3 454-4 454-5 ELECTRICAL ELECTRICAL Copyright  2007 Rev: 2009-09-10 Microsemi Microwave Products Page 2 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 LSP1000 – LSP1012 TM ® ENHANCED PERFORMANCE SURFACE MOUNT EPSM® PIN Diodes RoHS Compliant MECHANICAL OPTIONS EPSM products are available in a broad range of mechanical configurations. The standard package style is the 450 series. This series has several sizes available to accommodate the internal chip configurations. The 450A is the most common configuration for single diode applications. The 454 series package style is a three terminal configuration designed to accommodate 2 chip for ‘T” and common anode/cathode designs. With uniform ‘flat-top’ construction, the 450 series of EPSM products are ideally suited for tape and reel / automated assembly. The 150 series of EPSM products have a ‘glob-top’ construction and are traditionally used in smaller volume applications. www.MICROSEMI.com PACKAGE STYLE 150X PACKAGE STYE 450X PACKAGE STYLE 154 PACKAGE STYPE 454 MECHANICAL MECHANICAL Copyright  2007 Rev: 2009-09-10 Microsemi Microwave Products Page 3 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748