LX24132ILQ-TR

PRODUCT BRIEF TM ® LX24132 - 32 Channels BackLight LED Driver DESCRIPTION APPLICABLE DOCUMENTS KEY FEATURES W W W . Microsemi . C O M The LX 24132ILQ is a 32 channel LED current driver. The device is part of a chipset and each ® LX 24132ILQ is capable of controlling four FET Arrays. They contain eight FETs driving and controlling up to 32 LED channels, where each channel is capable of driving a current of up to 200mA. The internal power supply control circuitry adjusts the voltage level of an external LED Power Source. It is done by regulating the LED supply voltage to the optimum level, thus, minimizing the system power loss. At the same time, accurate current regulation for each of the 32 LED strings is maintained. An SPI interface allows for fast communication with the Host system. A "Daisy Chain" concept and very fast baud rate facilitate the multiple connections of the LED drivers for small or large panels. The LX 24132ILQ can detect three types of system faults on each of its 32 channels (over-temperature, open LEDs and short LEDs) and practices protection measures accordingly. Over-temperature and LED shortcircuit protections prevent the device from over-heating by shutting down its operation before the junction temperature reaches the "unsafe" operating limit. It resumes its operation when the chip cools down. ® ®   LX 23108LILQ Datasheet, 8  Channel FET Array Cat. No. 06-0074-058 ® ® LX 24132ILQ / LX 23108LILQ  AN-182, Designing a Low Current LED BackLight Driver  System, Cat No. 06-0077-080 ®      White LED or RGB BackLight driver for large size display panels Up to 32 LED strings with ±1.5% precision current matching Wide dimming ratio with PWM and LED current amplitude control 12-bit PWM duty-cycle resolution and 8-bit resolution for LED current setting LED power supply voltage control SPI communication interface Open string, short LED and over-temperature protection for each individual channel On-chip thermal monitoring IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com LX24132ILQ PACKAGE ORDER INFO Plastic 8x8mm QFN 56 pin RoHS Compliant/Pb free LX24132ILQ -40 to +85C Note: Available in Tape & Reel. Append the letters ”TR” to the part number. (i.e. LX24132ILQ-TR) TA (C) Copyright  2009 Rev. 0.4, 2009-03-26 Microsemi Analog Mixed Signal Group 1 Hanagar st., P.O/ Box 7220 Hod Hasharon 45421, Israel Tel: +972-9-7755100 Fax: +972-9-7755111 page 1 COMPANY CONFIDENTIAL TM ® LX24132 - 32 Channels BackLight LED Driver Pin Configuration______________ PSEL_SIG PWM00 PWM01 PWM02 PWM03 PWM04 PWM05 PWM06 PWM07 PWM08 PWM09 PWM10 PWM11 PWM12 W W W . Microsemi . C O M ABSOLUTE MAXIMUM RATINGS Supply Input Voltage (VCC, VDD) ….………………………………………..……………….… -0.5V to 4.5V All other pins…………………………………………………………….……. -0.5V to VCC+0.3 up to 4.5V Operating Ambient Temperature Range……………………………………….………………. -40 to 85C Maximum Operating Junction Temperature………………………………………….……………….150C ESD Protection at all I/O pins……………………………………………….………………… +/- 2KV HBM Storage Temperature Range………………………………………………………….……. -65C to 150C Package Peak Temperature for Solder Reflow (40 seconds maximum exposure)….… 260°C (+0/-5°C) Notes: Exceeding these ratings could result in damage to the device. All voltages are with respect to Ground. THERMAL DATA (POWER CONSUMPTION) 21°C/W – according to JESD51-7. THERMAL RESISTANCE-JUNCTION TO AMBIENT Junction Temperature Calculation: TJ = TA + (PD x JA). © 2009 Microsemi LTD. All rights reserved. For support contact: sales_AMSG@microsemi.com or visit our website at www.microsemi.com. SDO PWM31 PWM30 PWM29 PWM28 PWM27 PWM26 PWM25 PWM24 PWM23 PWM22 PWM21 PWM20 PWM19 LX24132ILQ Copyright  2009 Rev. 0.4, 2009-03-26 Microsemi Analog Mixed Signal Group 1 Hanagar st., P.O/ Box 7220 Hod Hasharon 45421, Israel Tel: +972-9-7755100 Fax: +972-9-7755111 page 16