LX9506

A MICROSEMI
 COMPANY LX9506 Input Cable Assembly P R O D UC TI O N DATA S HEET
 The LX9506 is an input-connector cable assembly that is used to connect Linfinity’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 5-pin SMT header. The housing and pins are crimp-terminated to 18-inch (457mm) lengths of UL1061 AWG#26 wire. This cable assembly is designed to save users the job of obtaining housing, pin, wire, and crimp-tools in addition to the assembly of an evaluation board.  
Used for Interconnection of W W W . Microsemi . COM



IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Backlight Inverter Connector (Molex 53261) to Power, Ground, and Control Signal Generous 18-inch (457mm) Lead Length to accommodate Most Applications Pre-Stripped Ends Facilitate Ease of Hook-up Leads Color-Coded for Quick and Accurate Termination Wire is 300 Volt Rated to 80°C, PVC Insulated and is Stranded in a 7X #34 Configuration 
  S trip & R e ta in 0.125in. ±0.020 3.17m m ±0.50 1 2 3 4 5 6 7
  1 8.000in. ±0.250 457.20m m ±6.35
         1 2 3 4 5 6 7 Molex* 51021 Series Molex* 50079 Series UL 1061, 26 AWG, Red Wire UL 1061, 26 AWG, Blue Wire UL 1061, 26 AWG, Black Wire UL 1061, 26 AWG, Orange Wire UL 1061, 26 AWG, Green Wire 1 2 3 4 5 Red Blue Black Orange Green LX9506 LX9506 * Molex is a Registered Trademark of Molex, Inc.  
 LX9506 Copyright © 2000 Rev. 0.1,2000-09-22 Microsemi Linfinity Microelectronics Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1