MPL4701

MPP4201 – MPP4205, MPL4700 TM ® CONTROL DEVICES – MMSM PIN and Limiter Diodes RoHS Compliant DESCRIPTION KEY FEATURES  Up to 10W incident RF power handling  Low parasitics LP = 0.02nH Typical CP = 0.04pF Typical  Broadband Performance through X-Band  Available on Tape & Reel or on Film Frame for pick & place  Small, SOD 323 Footprint  RoHS Compliant 1 This series of surface mount PIN and Limiter diodes utilize new and unique monolithic MMSM technology. The technology is a package/device integration accomplished at the wafer fabrication level. Since the cathode and anode interconnections utilize precision photolithographic techniques rather than wire bonds, parasitic package inductance is tightly controlled. The package parasitics provide smooth non-resonant functionality through X Band. This series of devices meets RoHS requirements per EU Directive 2002/95/EC. www.MICROSEMI.com APPLICATIONS The MPP4000 series of PIN diodes can be used in RF circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from UHF through X band. Switch applications include high speed switches (ECM systems), TR switches channel or antenna selection switches (Telcom and WLAN applications), duplexers (radar) and digital phase shifters (phased arrays). These diodes are also used as passive and active limiters for low to moderate RF power levels. Attenuator type applications include amplitude modulators, AGC attenuators and power levelers. The MPL4700 / MPL4701 series of Limiter diodes are design for low to medium power receiver protection. The typical leakage output power for the MPL4701 is +20 dbm versus +24 dbm for the MPL4700. ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Rating Maximum Leakage Current @80% of minimum Rated VB Operating Temperature Storage Temperature Symbol IR TOP TSTG Value 0.5 -55 to +150 -65 to +150 Unit uA ºC ºC 1- These devices are supplied with gold terminations. APPLICATIONS/BENEFITS  Receiver protection circuits  Broadband Switching  Economy Switching  RF Attenuators IMPORTANT: For the most current data, visit: www.MICROSEMI.com Specifications are subject to change. Consult factory for latest information. These devices are ESD sensitive and must be handled use using ESD precautions. MPP4200, MPL4700 Copyright  2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 1 MPP4201 – MPP4205, MPL4700 TM ® CONTROL DEVICES – MMSM PIN and Limiter Diodes RoHS Compliant . Model Number MPP4201 MPP4202 MPP4203 MPP4204 MPP4205 MPL4700 MPL4701 DEVICE ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) IR=10μA (Min) 70 50 50 25 70 25 15 VB (V) CT(pF)1 @-10V (Max) 0.20 0.15 0.10 0.15 0.15 0.15 0.20 RS(Ω)2@ 0.01 mA (Typ) @1 mA RS(Ω)2 @10 mA (Max) RS(Ω)2 @20 mA (Max) 2.5 2.8 3.0 RS(Ω)2 TL (Typ) 150 50 50 20 150 20 10 Application Switching / Attenuation Switching Economy Switching Switching Attenuation Receiver Protection Receiver Protection www.MICROSEMI.com 2.0 250 7-16 5.0 2.0 2.5 a a Notes 1- Capacitance is measured at f = 1 MHz. 2- Series Resistance (RS) is measured at f = 100 MHz. Devices are mounted in a package suitable for testing. a. RS is measured at 1GHz for the MPL4700 and MPL4701 devices. ELECTRICALS Copyright  2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 2 MPP4201 – MPP4205, MPL4700 TM ® CONTROL DEVICES – MMSM PIN and Limiter Diodes RoHS Compliant TYPICAL RS VS If @ 25C www.MICROSEMI.com 10000.00 MPP4205 1000.00 MPP4202/MPP4203 Rs @ 100 MHz (ohms) 100.00 MPP4201 MPP4204 10.00 1.00 0.10 0.001 0.010 0.100 IF (mA) 1.000 10.000 100.000 PACKAGE STYLE 206 ELEC / MECH Copyright  2006 Rev: 2009-01-19 Microsemi Microwave Products 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 Page 3