MSICSN05120

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 SILICON CARBIDE SCHOTTKY POWER RECTIFIER DEVICES MSiCSN05120 MSiCSX05120 MSiCSS05120 MSiCST05120 5A / 1200V Silicon Carbide Schottky Rectifier ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Peak Repetitive Reverse Voltage Surge Peak Reverse Voltage DC Blocking Voltage Average Forward Current, 25°C Peak Surge Forward Current @ tp = 8.3ms, half sinewave, Io = 0; VRM = 0 Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Operating Junction Temperature Storage Temperature Note 1: Derate linearly @ tbd ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions OFF CHARACTERTICS Forward Voltage IF = 1A, Tj = 25°C* IF = 2.5A, Tj = 25°C* IF = 5.0A, Tj = 25°C* Reverse Current VR = 1200V, Tj = 25°C VR = 1200V, Tj = 175°C Junction Capacitance VR = 0V f = 1MHz * Pulse test: Pulse width 300 µsec, Duty cycle 2% 1.2 1.6 1.8 50 100 500 MSiCSS05120 U-4 (SURFACE MOUNT: SMD.22) Symbol Min. Max. Unit Symbol VRWM VRSM VDC Io IFSM Rθjc Rθja Tj Tstg -65°C to +225 -65°C to +225 Value 1200 1200 1200 5 30 Unit V V V Apk Apk °C/W °C/W °C °C MSiCSN05120 TO-257 MSiCST05120 TO-39 VF V IR µA Cj pF MSiCSX05120 TO-257 (Tabless) T4-LDS-0104 Rev. 2 (110340) Page 1 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Ltr CD CH HD LC LD LL LU L1 L2 P Q r TL TW α Term 1 Term 2 Term 3 Inches Min Max .305 .335 .160 .180 .335 .370 .200 TP .016 .021 .500 .750 .016 .019 .050 .250 .100 .040 .010 .029 .045 .028 .034 45° TP Anode Open (no connection) Cathode (case) Millimeters Min Max 7.75 8.51 4.07 4.57 8.51 9.40 5.08 TP 0.41 0.53 12.7 19.05 0.41 0.48 1.27 6.35 2.54 1.02 0.254 0.74 1.14 0.72 0.86 45° TP Notes 7 8, 9 8, 9 8, 9 8, 9 8, 9 6 5 10 7 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Beyond radius (r) maximum, TW shall be held for a minimum length of .011 inch (0.279 mm). 4. Dimension TL measured from maximum HD. 5. Outline in this zone is not controlled. 6. Dimension CD shall not vary more than .010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling. 7. Leads at gauge plane .054 +.001, -.000 inch (1.37 +0.03, -0.00 mm) below seating plane shall be within .007 inch (0.18 mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. The device may be measured by direct methods. 8. LU applies between L1 and L2. LD applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond LL minimum. 9. All three leads. 10. Radius (r) applies to both inside corners of tab. 11. Cathode is electrically connected to the case. 12. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 1. Physical dimensions (TO-205AF - formerly low profile TO-39). T4-LDS-0104 Rev. 2 (110340) Page 2 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NOTE: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. Symbol BL BW CH LH LL1 LL2 LS1 LS2 LW1 LW2 Q1 Q2 TERM 1 TERM 2, 3 Dimensions Inches Millimeters Min Max Min Max 0.215 0.225 5.46 5.72 0.145 0.155 3.68 3.94 0.049 0.075 1.24 1.91 0.020 0.508 0.085 0.125 2.16 3.17 0.045 0.075 1.14 1.90 0.070 0.095 1.78 2.41 0.035 0.048 0.889 1.21 0.135 0.145 3.43 3.68 0.047 0.057 1.19 1.45 0.030 0.070 0.762 1.78 0.020 0.035 0.508 0.88 Cathode Anode FIGURE 2. Physical dimensions and configuration (U4). T4-LDS-0104 Rev. 2 (110340) Page 3 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NOTE: 1. Dimensions are in inches. 2. Inch equivalents are given for general information only. 3. Glass meniscus included in dimension TL and BL. Ltr BL CH LD LL LO LS MHD MHO TL TT TW TERM 1 TERM 2 TERM 3 Dimensions Millimeters Inches Min Max Min Max 10.41 10.92 .410 .430 4.83 5.08 .190 .200 0.64 0.89 .025 .035 12.82 15.11 .505 .595 3.05 BSC .120 BSC 2.54 BSC .100 BSC 3.56 3.81 .140 .150 13.39 13.64 .527 .537 16.38 16.89 .6450 .665 0.89 1.14 .035 .045 10.41 10.67 .410 .420 SEE SCHEMATIC OPEN (No connection) SEE SCHEMATIC FIGURE 3. Physical dimensions TO-257 and configuration. T4-LDS-0104 Rev. 2 (110340) Page 4 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NOTE: 1. Dimensions are in inches. 2. Inch equivalents are given for general information only. 3. Glass meniscus included in dimension TL and BL. 4. Tabless TO-257 package. Ltr BL CH LD LL LO LS TW TERM 1 TERM 2 TERM 3 Dimensions Millimeters Inches Min Max Min Max 10.41 10.92 .410 .430 4.83 5.08 .190 .200 0.64 0.89 .025 .035 12.82 15.11 .505 .595 3.05 BSC .120 BSC 2.54 BSC .100 BSC 10.41 10.67 .410 .420 SEE SCHEMATIC OPEN (No connection) SEE SCHEMATIC FIGURE 4. Physical dimensions Tabless TO-257 and configuration T4-LDS-0104 Rev. 2 (110340) Page 5 of 5