MSMLJ90A

TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Website: http://www.microsemi.com 6 Lake Street, Lawrence, MA 01841 Tel: 1 -800-446-1158 / (978) 794-1666, Fax: (978) 6890803 SURFACE MOUNT 3000 Watt Transient Voltage Suppressor - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Available in both J-bend and Gull-wing terminations - Selections for 5.0 to 170 V standoff voltages (VWM) LEVELS M, MA, MX, MXL DEVICES MSMLJ5.0A thru MSMLJ170CA, e3 and MSMLG5.0A thru MSMLG170CA, e3 FEATURES        High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options. Axial-lead equivalent packages for thru-hole mounting available as M5KP5.0A to M5KP110CA with 5000 W rating, (consult factory for other surface mount options) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant devices available by adding an “e3” suffix 3σ lot norm screening performed on Standby Current ID APPLICATIONS / BENEFITS     Suppresses transients up to 3000 watts @ 10/1000 µs Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: o Class 1 & 2: MSML5.0A to MSML 170ACA o Class 3: MSML5.0A to MSML150CA o Class 4: MSML5.0A to MSML75CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: o Class 1: MSML5.0A to MSML170CA o Class 2: MSML5.0A to MSML90CA o Class 3: MSML5.0A to MSML48CA o Class 4: MSML5.0A to MSML24CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: o Class 2: MSML5.0A to MSML43CA o Class 3: MSML5.0A to MSML22CA o Class 4: MSML5.0A to MSML10CA   MAXIMUM RATINGS     Peak Pulse Power dissipation at 25 ºC: 3000 watts at 10/1000 μs (also see Figures 1,2, and 3) with impulse repetition rate (duty factor) of 0.01 % or less tclamping (0 V to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65 ºC to +150 ºC Thermal resistance: 17.5 ºC/W junction to lead, or 77.5 ºC/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint Steady-State Power dissipation: 6 watts at TL = 45 ºC, or 1.61 watts at TA = 25 ºC when mounted on FR4 PC board with recommended footprint (see page 2) Forward Surge at 25 ºC: 200 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only) Solder temperatures: 260 ºC for 10 s (maximum)   RF01003 Rev A, June 2010 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1 -800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com _____________________________________________________________________________________________________________________________ ______ MECHANICAL AND PACKAGING        Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte-tin plating solderable per MIL-STD-750, method 2026 Cathode indicated by band. No cathode band on bi -directional devices. Part number marked on package Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL option available with up to 750 per 7 inch reel or up to 2500 per 13 inch reel EIA-481-B with 16 mm tape. Add “TR” suffix to part number. Weight: 0.25 gram (approximately) PACKAGE DIMENSIONS (SMLJ) (SMLG) A .115 .121 2.92 3.07 DIMENSIONS IN INCHES B C D E F .260 .220 .305 .077 .380 .280 .245 .320 .104 .400 DIMENSIONS IN MILLIMETERS 6.60 5.59 7.75 1.95 9.65 7.11 6.22 8.13 2.65 10.16 K .025 .040 0.635 1.016 L .030 .060 .760 1.520 MIN MAX MIN MAX (DO-214AB) (DO-215AB) Typical Standoff Height: 0.004” – 0.008” (0.1mm – 0.2mm) PAD LAYOUT SMLJ (DO-214AB) A B C INCHES 0.390 0.110 0.150 mm 9.90 2.79 3.81 SMLG (DO-215AB) A B C INCHES 0.510 0.110 0.150 mm 12.95 2.79 3.81 SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current Symbol IPP VC Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR IBR RF01003 Rev A, June 2010 High Reliability Product Group Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1 -800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com _____________________________________________________________________________________________________________________________ ______ ELECTRICAL CHARACTERISTICS @ 25oC REVERSE STAND-OFF VOLTAGE VWM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE VC @ IPP PEAK PULSE CURRENT (see Fig. 2) IPP MAXIMUM STANDBY CURRENT ID @ VWM MICROSEMI PART NUMBER VBR @ IBR GULL-WING MSMLG5.0A MSMLG6.0A MSMLG6.5A MSMLG7.0A MSMLG7.5A MSMLG8.0A MSMLG8.5A MSMLG9.0A MSMLG10A MSMLG11A MSMLG12A MSMLG13A MSMLG14A MSMLG15A MSMLG16A MSMLG17A MSMLG18A MSMLG20A MSMLG22A MSMLG24A MSMLG26A MSMLG28A MSMLG30A MSMLG33A MSMLG36A MSMLG40A MSMLG43A MSMLG45A MSMLG48A MSMLG51A MSMLG54A MSMLG58A MSMLG60A MSMLG64A MSMLG70A MSMLG75A MSMLG78A MSMLG85A MSMLG90A MSMLG100A MSMLG110A MSMLG120A MSMLG130A MSMLG150A MSMLG160A MSMLG170A NOTE 1: NOTE 2: J- BEND MSMLJ5.0A MSMLJ6.0A MSMLJ6.5A MSMLJ7.0A MSMLJ7.5A MSMLJ8.0A MSMLJ8.5A MSMLJ9.0A MSMLJ10A MSMLJ11A MSMLJ12A MSMLJ13A MSMLJ14A MSMLJ15A MSMLJ16A MSMLJ17A MSMLJ18A MSMLJ20A MSMLJ22A MSMLJ24A MSMLJ26A MSMLJ28A MSMLJ30A MSMLJ33A MSMLJ36A MSMLJ40A MSMLJ43A MSMLJ45A MSMLJ48A MSMLJ51A MSMLJ54A MSMLJ58A MSMLJ60A MSMLJ64A MSMLJ70A MSMLJ75A MSMLJ78A MSMLJ85A MSMLJ90A MSMLJ100A MSMLJ110A MSMLJ120A MSMLJ130A MSMLJ150A MSMLJ160A MSMLJ170A V 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 V 6.40 – 7.00 6.67 – 7.37 7.22 – 7.98 7.78 – 8.60 8.33 – 9.21 8.89 – 9.83 9.44 – 10.4 10.0 – 11.1 11.1 – 12.3 12.2 – 13.5 13.3 – 14.7 14.4 – 15.9 15.6 – 17.2 16.7 – 18.5 17.8 – 19.7 18.9 – 20.9 20.0 – 22.1 22.2 – 24.5 24.4 – 26.9 26.7 – 29.5 28.9 – 31.9 31.1 – 34.4 33.3 – 36.8 36.7 – 40.6 40.0 – 44.2 44.4 – 49.1 47.8 – 52.8 50.0 – 55.3 53.3 – 58.9 56.7 – 62.7 60.0 – 66.3 64.4 – 71.2 66.7 – 73.7 71.1 – 78.6 77.8 – 86.0 83.3 – 92.1 86.7 – 95.8 94.4 – 104.0 100 – 111 111 – 123 122 – 135 133 – 147 144 – 159 167 – 185 178 – 197 189 – 209 mA 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 193 209 243 259 275 A 326.0 291.3 267.9 250.0 232.6 220.6 208.4 194.8 176.4 164.8 150.6 139.4 129.4 123.0 115.4 106.6 102.8 92.6 84.4 77.2 71.2 66.0 62.0 56.2 51.6 46.4 43.2 41.2 38.8 36.4 34.4 32.0 31.0 29.2 26.6 24.8 22.8 20.8 20.6 18.6 16.8 15.6 14.4 12.4 11.6 11.0 A 1000 1000 500 200 100 50 25 10 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 For Bidirectional device types indicate a CA suffix after the part number (i.e. MSMLG170CA). Bidirectional capacitance is half that shown in Figure 4 at zero volts. Microsemi Corp’s SML series (3000W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance p ath for surge current flow to ground. These high-speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices. RF01003 Rev A, June 2010 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1 -800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com _____________________________________________________________________________________________________________________________ ______ GRAPHS 100 (Waveform – See Figure 2) Non-repetitive 10 (PPP) – Peak Pulse Power - kW 1.0 0 1s 10sec 100sec 1ms 10ms FIGURE 2 – Pulse waveform tp – Pulse Time – sec FIGURE 1 – Peak Pulse Power vs. Pulse Time Peak Pulse Power (PPP) or continuous Power in Percent of 25oC Rating C: Capacitance in pico farads TL Lead Temperature oC FIGURE 3 – Derating Curve BV: Breakdown Voltage in Volts FIGURE 4 Typical Capacitance vs. Breakdown RF01003 Rev A, June 2010 High Reliability Product Group Page 4 of 4