RT100KP58A

RT100KP58A

  • 厂商:

    MICROSEMI(美高森美)

  • 封装:

  • 描述:

    RT100KP58A - Preferred 100 kW Transient Voltage Suppressor for AIRCRAFT POWER BUS PROTECTION - Micro...

  • 详情介绍
  • 数据手册
  • 价格&库存
RT100KP58A 数据手册
RT100KP33A thru RT100KP400CA, e3 SCOTTSDALE DIVISION Preferred 100 kW Transient Voltage Suppressor for AIRCRAFT POWER BUS PROTECTION APPEARANCE W WW . Microsemi . C OM DESCRIPTION Microsemi’s 100 kW Transient Voltage Suppressors (TVSs) are designed for aircraft applications requiring high power transient protection with a comparatively small axial-leaded package size. This includes various threats such as “Waveform 4” at 6.4/69 µs per RTCA/DO-160E Section 22. It is also available with screening in accordance with MIL-PRF-19500 or avionics screening as described in the Features section herein. It may also be optionally acquired with RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. Microsemi also offers a broad spectrum of other TVSs to meet your needs. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • Available in both Unidirectional and Bidirectional construction (Bidirectional with CA suffix) TVS selection for 33 to 400 V Standoff Voltages (VWM) Suppresses transients up to 100 kW @ 6.4/69 μs Fast response with less than 5 ns turn-on time. Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X), surge (3X) in each direction, 24 hours HTRB in each direction, and post test (VBR and ID) Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are also available by adding MQ, MX, or MV prefixes respectively to part numbers. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B. RoHS Compliant devices available by adding “e3” suffix • APPLICATIONS / BENEFITS Protection from high power switching transients, induced RF, and lightning threats with comparatively small package size (0.25 inch diameter) Protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4 Pin injection protection per RTCA/DO-160E up to Level 4 for Waveform 4 (6.4/69 µs) on all devices Pin injection protection per RTCA/DO-160E up to Level 5 for Waveform 4 (6.4/69 µs) on device types RT100KP33A or CA up to RT100KP260A or CA Pin injection protection per RTCA/DO-160E up to Level 3 for Waveform 5A (40/120 µs) on all devices Pin injection protection per RTCA/DO-160E up to Level 4 for Waveform 5A (40/120 µs) on device types RT100KP33A or CA up to RT100KP64A or CA Consult Factory for other voltages with similar Peak Pulse Power capabilities. • • • • • • • • • MAXIMUM RATINGS • • • • • Peak Pulse Power dissipation at 25ºC: 100 kW at 6.4/69 µs waveform in Figure 8 (also see figures 1 and 2) Impulse repetition rate: 0.005% tclamping (0 volts to VBR min):
RT100KP58A
1. 物料型号: - 型号范围为RT100KP33A至RT100KP400CA,其中双向TVS型号带有后缀CA。

2. 器件简介: - 这些100 kW瞬态电压抑制器(TVS)适用于需要高功率瞬态保护且封装尺寸相对较小的航空应用。它们能够应对包括RTCA/DO-160E第22节中的“Waveform 4”(6.4/69 μs)在内的各种威胁。产品也提供符合MIL-PRF-19500标准的筛选版本,以及符合RoHS标准的版本(带有“e3”后缀)。

3. 引脚分配: - 单向TVS的阴极用带状标记,双向TVS不需要带状标记。

4. 参数特性: - 包括额定隔离电压(VWM)、击穿电压(V(BR))、最大钳制电压(Vo)、最大反向漏电流(Io)、最大峰值脉冲电流(Ipp)和V(BR)温度系数(CV(BR))等参数。

5. 功能详解: - 这些TVS能够承受高达100 kW的瞬态功率,响应时间少于5纳秒。它们还提供航空级100%筛选选项,并符合MIL-PRF-19500标准的筛选选项。此外,还提供符合RoHS标准的设备。

6. 应用信息: - 用于保护航空电源总线免受高功率开关瞬态、感应RF和雷电威胁,同时具有相对较小的封装尺寸。它们还符合IEC61000-4-2和IEC61000-4-4标准的ESD和EFT保护,以及RTCA/DO-160E标准的波形4的电平注入保护。

7. 封装信息: - 封装采用无空隙传递成型热固性环氧树脂,满足UL94V-0要求。封装尺寸详见文档最后一页。
RT100KP58A 价格&库存

很抱歉,暂时无法提供与“RT100KP58A”相匹配的价格&库存,您可以联系我们找货

免费人工找货