SG143

SG143 HIGH-VOLTAGE OPERATIONAL AMPLIFIER DESCRIPTION The SG143 is a general-purpose high-voltage operational amplifier featuring operation to ±40V and overvoltage protection up to ±40V. Increased slew rate, together with higher common-mode and supply rejection, insure improved performance at high supply voltages. Operating characteristics are independent of supply voltage and temperature. These devices are intended for use in high voltage applications where common-mode input ranges, high output voltage swings, and low input currents are required. Also, they are internally compensated and are pin compatible with industry standard operational amplifiers. FEATURES • • • • • ±4.0V to ±40V supply voltage range ±37V output voltage swing ±24V common-mode voltages Overvoltage protection Output short circuit protection HIGH RELIABILITY FEATURES-SG143 ♦ Available to MIL-STD-883 and DESC SMD ♦ LMI level "S" processing available CIRCUIT SCHEMATIC 4/90 Rev 1.1 5/94 Copyright © 1994 1 11861 Western Avenue ∞ Garden Grove, CA 92641 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG143 ABSOLUTE MAXIMUM RATINGS (Note 1) Supply Voltage SG143 ............................................................................ ±40V Input Voltage SG143 ............................................................................ ±40V Differential Input Voltage ................................. ±(V+ + |V -| - 3) V Note 1. Exceeding these ratings could cause damage to the device. Output Short Circuit Duration ............................................ 5 sec Operating Junction Temperature Hermetic (T, Y-Package) .............................................. 150°C Storage Temperature Range ............................ -65°C to 150°C Lead Temperature (Soldering, 10 Seconds) ................... 300°C THERMAL DATA T Package: Thermal Resistance-Junction to Case, θ JC ................... 25°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 130°C/W Y Package: Thermal Resistance-Junction to Case, θ JC .................. 50°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 130°C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x θ JA). Note B. The above numbers for θJC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θJA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Note 2) Supply Voltage SG143 ........................................................................... ±28V Input Voltage SG143 ........................................................................... ±28V Operating Ambient Temperature Range (TJ) SG143 ............................................................ -55°C to 125°C Note 2. Range over which the device is functional. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply for the operating ambient temperature of 25°C and over the recommended supply voltage range. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Input Offset Voltage TA = TMIN to TMAX Input Offset Current TA = TMAX TA = TMIN. Input Bias Current Large Signal Voltage Gain Test Conditions TA = TMIN to TMAX RL = 100KΩ, V OUT = ±10V TA = TMIN to TMAX Common-Mode Rejection Power Supply Rejection Input Common Mode Range (Peak) Unity Gain Bandwidth Slew Rate RL =5KΩ Supply Current Output Voltage Swing Short Circuit Current SG143 Min. Typ. Max. 2.0 5.0 6.0 1.0 3.0 4.5 7.0 8.0 20 35 100 180 50 80 110 15 100 ±24 ±25 1.0 2.5 4.0 ±22 20 Units mV mV nA nA nA nA nA V/mV V/mV dB µV/V V MHz V/ µs mA V mA 4/90 Rev 1.1 2/94 Copyright © 1994 2 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG143 CHARACTERISTIC CURVES FIGURE 1. POWER BANDWIDTH FIGURE 2. PEAK OUTPUT VOLTAGE SWING VS. POWER SUPPLY VOLTAGE FIGURE 3. OPEN-LOOP FREQUENCY RESPONSE FIGURE 4. OUTPUT SHORT-CIRCUIT CURRENT VS. TEMPERATURE FIGURE 5. INPUT CURRENT FIGURE 6. VOLTAGE GAIN 4/90 Rev 1.1 2/94 Copyright © 1994 3 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG143 CHARACTERISTIC CURVES (continued) FIGURE 7. SUPPLY CURRENT FIGURE 8. UNITY GAIN BANDWIDTH TYPICAL APPLICATIONS FIGURE 9 - VOLTAGE OFFSET NULL CIRCUIT FIGURE 10 - DIFFERENTIAL AMPLIFIER WITH ±20V COMMON-MODE INPUT VOLTAGE RANGE FIGURE 11 - LOW-DRIFT SAMPLE AND HOLD CONNECTION DIAGRAMS & ORDERING INFORMATION Package 8-PIN METAL CAN T - PACKAGE (See Notes Below) Part No. SG143T/883B SG143T/DESC SG143T Ambient Temperature Range -55°C to 125°C -55°C to 125°C -55°C to 125°C Connection Diagram N.C. OFFSET ADJUST INVERTING INPUT NON-INVERTING INPUT 2 3 4 5 8 1 7 6 V+ OUTPUT OFFSET ADJUST V- 8-PIN CERAMIC DIP Y- PACKAGE SG143Y/883B SG143Y/DESC SG143Y -55°C to 125°C -55°C to 125°C -55°C to 125°C OFFSET ADJUST INVERTING INPUT NON-INVERTING INPUT V- 1 2 3 4 8 7 6 5 N.C. V+ OUTPUT OFFSET ADJUST Note 1. Contact factory for JAN and DESC product availablity. 2. All packages are viewed from the top. 4/90 Rev 1.1 2/94 Copyright © 1994 4 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc.