SG1503

SG1503/SG2503/SG3503 PRECISION 2.5-VOLT REFERENCE DESCRIPTION This monolithic integrated circuit is a fully self-contained precision voltage reference generator, internally trimmed for ±1% accuracy. Requiring less than 2mA in quiescent current, this device can deliver in excess of 10mA with total load- and line-induced tolerances of less than 0.5%. In additon to voltage accuracy, internal trimming achieves a temperature coefficient of output voltage of typically 10 ppm/°C. As a result, these references are excellent choices for application to critical instrumentation and D-to-A converter systems. The SG1503 is specified for operation over the full military ambient temperature range of -55°C to 125°C , while the SG2503 is designed for -25°C to 85°C and the SG3503 for commercial applications of 0°C to 70°C. FEATURES • • • • • • Output voltage trimmed to ±1% Input voltage range of 4.5 to 40V Temperature coefficent of 10ppm/°C Quiescent current typically 1.5mA Output current in excess of 10mA Interchangeable with MC1503 and AD580 HIGH RELIABILITY FEATURES - SG1503 ♦ Available to MIL-STD-883 and DESC SMD ♦ Radiation data available ♦ LMI level "S" processing available FUNCTIONAL DIAGRAM Copyright © 1996 Rev 1.3a 10/04 1 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 Microsemi Inc. - Integrated Products SG1503/SG2503/SG3503 ABSOLUTE MAXIMUM RATINGS (Note 1) Input Voltage ....................................................................... 40V Storage Temperature Range ............................. -65°C to 150°C Note 1. Exceeding these ratings could cause damage to the device. Operating Junction Temperature Hermetic (T, Y - Package) ............................................. 150°C Plastic (M, DM - Package) ............................................ 150°C Lead Temperature (Soldering, 10 Seconds) .................. 300°C Pb-free / RoHS Peak Solder Reflow Temp (40 sec. max. exp.)........ 260°C (+0, -5) THERMAL DATA T Package: Thermal Resistance-Junction to Case, θ JC ................... 15°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 120°C/W Y Package: Thermal Resistance-Junction to Case, θ JC .................. 50°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 130°C/W M Package: Thermal Resistance-Junction to Case, θ JC ................... 60°C/W Thermal Resistance-Junction to Ambient, θ JA ............. 95°C/W DM Package: Thermal Resistance-Junction to Case, θ JC .................. 55°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 165°C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA). Note B. The above numbers for θ JC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θ JA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Note 2) Input Voltage .......................................................... 4.5V to 40V Operating Ambient Temperature Range SG1503 ............................................................ -55°C to 125°C SG2503 ............................................................. -25°C to 85°C SG3503 ................................................................ 0°C to 70°C Note 2. Range over which the device is functional. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG1503 with -55°C ≤ TA ≤ 125°C, SG2503/SG3503 with 0°C ≤ TA ≤ 70°C, VIN = 15V, and IL = 0mA. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Output Voltage Input Voltage Line Regulation Load Regulation Temperature Regulation Quiescent Current Short Circuit Current Ripple Rejection Output Noise Voltage Stability TA = 25°C Test Conditions TA = 25°C VIN = 5V to 15V VIN = 15V to 40V ∆IL = 10mA ∆IL = 10mA, VIN = 30V (SG1503 only) (SG2503/3503 only) VIN = 40V TA = 25°C f = 120Hz, TA = 25°C BW = 10KHz, TA = 25°C SG1503/2503 Min. Typ. Max. 2.485 2.500 2.515 4.7 40 4.5 40 3 1 5 3 5 3 4 8 20 15 5 2.5 2.0 1.5 15 30 20 76 100 250 SG3503 Units Min. Typ. Max. V 2.475 2.500 2.525 V 4.7 40 V 4.5 40 1 mV 3 3 mV 10 3 mV 10 4 mV 15 mV 5 mV 10 1.5 mA 2.0 20 mA 15 30 76 dB 100 µ V rms 250 µ V/Khr Copyright © 1996 Rev 1.3a 10/04 2 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 Microsemi Inc. - Integrated Products SG1503/SG2503/SG3503 CHARACTERISTIC CURVES FIGURE 1. OUTPUT VOLTAGE VS. TEMPERATURE FIGURE 2. RIPPLE REJECTION CONNECTION DIAGRAMS & ORDERING INFORMATION Package 8-PIN CERAMIC DIP Y - PACKAGE (See Notes Below) Part No. SG1503Y/883B SG1503Y/DESC SG1503Y SG2503Y SG3503Y SG2503M SG3503M SG3503DM SG2503DM Ambient Temperature Range -55°C to 125°C -55°C to 125°C -55°C to 125°C -25°C to 85°C 0°C to 70°C -25°C to 85°C 0°C to 70°C 0°C to 70°C -25°C to 85°C Connection Diagram VIN VOUT GND N.C. 1 2 3 4 8 7 6 5 N.C. N.C. N.C. N.C. 8-PIN PLASTIC DIP M - PACKAGE Pb-free / RoHS Transition DC: 0503* M Package: Pb-free / RoHS 100% Matte Tin Lead FInish 8-PIN PLASTIC SOIC DM - PACKAGE Pb-free / RoHS Transition DC: 0440* VIN VOUT GND N.C. 1 2 3 4 8 7 6 5 N.C. N.C. N.C. N.C. Pb-free / RoHS 100% Matte Tin Lead Finish 3-PIN TO-39 METAL CAN T - PACKAGE SG1503T/883B SG1503T/DESC SG1503T SG2503T SG3503T -55°C to 125°C -55°C to 125°C -55°C to 125°C -25°C to 85°C 0°C to 70°C VIN VOUT 1 2 3 GND Note 1. Contact factory for JAN and DESC product availablity. 2. All packages are viewed from the top. *RoHS compliant Copyright © 1996 Rev 1.3a 10/04 3 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 Microsemi Inc. - Integrated Products