SG309R

SG109/SG309 5 -VOLT FIXED VOLTAGE REGULATORS DESCRIPTION The SG109/SG309 is a completely self-contained 5V regulator. Designed to provide local regualtion at currents up to 1A for digital logic cards, this device is available in the hermetic TO-3, TO-66, TO39 and hermetic and plastic TO-220. A major feature of the SG109's design is its built-in protective features which make it essentially blowout proof. These consist of both current limiting to control the peak currents and thermal shutdown to protect against excessive power dissipation. With the only added component being a possible need for an input bypass capacitor, this regulator becomes extremely easy to apply. Utilizing an improved Bandgap reference design, problems have been eliminated that are normally associated with the zener diode references, such as drift in output voltage and large changes in the line and load regulation. FEATURES • • • • • • Fully compatible with TTL and DTL Output current in excess of 1A Internal thermal overload protection No additional external components Bandgap reference voltage Foldback current limiting HIGH RELIABILITY FEATURES-SG109 ♦ Available to MIL-STD-883 ♦ MIL - M38510 / 10701BXA - JAN109T ♦ Radiation data available ♦ LMI level "S" processing available SCHEMATIC 4/90 Rev 1.1 2/94 Copyright © 1994 1 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG109/SG309 ABSOLUTE MAXIMUM RATINGS (Note 1) Input Voltage ........................................................................ 35V Power Dissipation ........................................... Internally Limited Storage Temperature Range ............................. -65° C to 150°C Note 1. Exceeding these ratings could cause damage to the device. Operating Junction Temperature Hermetic (K, R, T, IG-Packages) .................................. 150°C Lead Temperature (Soldering, 10 Seconds) ................ 300 °C THERMAL DATA K Package: Thermal Resistance-Junction to Case, θJC ................. 3.0°C/W Thermal Resistance-Junction to Ambient, θJA .............. 35°C/W R Package: Thermal Resistance-Junction to Case, θJC ................. 5.0°C/W Thermal Resistance-Junction to Ambient, θJA .............. 40°C/W IG Package: Thermal Resistance-Junction to Case, θJC ................. 3.5°C/W Thermal Resistance-Junction to Ambient, θJA .............. 42°C/W T Package: Thermal Resistance-Junction to Case, θJC .................. 15°C/W Thermal Resistance-Junction to Ambient, θJA ............. 120°C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x θ JA). Note B. The above numbers for θ JC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θJA numbers are meant to be guidelines for the thermal performance of the device/ pc-board system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Note 2) Input Voltage Range ............................................... 7.0V to 25V Operating Junction Temperature Range SG109 ............................................................ -55°C to 150°C SG309 ............................................................... 0°C to 125°C Note 2. Range over which the device is functional. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG109 with -55°C ≤ TA ≤ 150°C, SG309 with 0°C ≤ TA ≤ 125°C, and for V IN = 10V, IOUT = 500mA (K, R, and IG -Power Packages-) and IOUT = 100mA (T-package). Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter Output Voltage Line Regulation Load Regulation Test Conditions TA = 25°C VIN = 7.1V to 25V, TA = 25°C TA = 25°C Power Pkgs: IOUT = 5mA to 1.5A T-package: IOUT =5mA to 500mA VIN= 7.4V to 25V Power Pkgs: IOUT = 5mA to 1.0A, P ≤ 20W T-package: IOUT =5mA to 200mA, P ≤ 20W VIN = 7.4V to 25V With Line : VIN = 7.4V to 25V With Load: Power Pkgs: IOUT = 5mA to 1.0A T-package: IOUT =5mA to 200mA f = 10Hz to 100KHz, TA = 25°C TA = 25°C SG109 SG309 Min. Typ. Max. Min. Typ. Max. 4.8 5.05 5.2 4.7 5.05 5.3 4.0 50 50 4.0 15 15 100 50 15 15 100 50 Units V mV mV mV Total Output Voltage Tolerance 4.6 4.6 5.0 5.0 Quiescent Current Quiescent Current Change 5.4 5.4 10 0.5 0.8 0.8 4.75 4.75 5.00 5.00 5.25 5.25 10 0.5 0.8 0.8 Output Noise Voltage Long Term Stability Ripple Rejection 40 10 50 50 40 20 V V mA mA mA mA µV mV dB 4/90 Rev 1.1 2/94 Copyright © 1994 2 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. SG109/SG309 APPLICATION CIRCUITS FIGURE 1 - FIXED 5V REGULATOR FIGURE 2 - ADJUSTABLE OUTPUT REGULATOR CONNECTION DIAGRAMS & ORDERING INFORMATION Package 3-TERMINAL TO-3 METAL CAN K-PACKAGE (See Notes Below) Part No. SG109K/883B SG109K SG309K Ambient Temperature Range -55°C to 125°C -55°C to 125°C 0°C to 70°C Connection Diagram VIN 1 2 CASE IS GROUND VOUT 3-TERMINAL TO-66 METAL CAN R-PACKAGE SG109R/883B SG109R SG309R -55°C to 125°C -55°C to 125°C 0°C to 70°C VIN 1 2 CASE IS GROUND VOUT 3-PIN HERMETIC TO-257 IG-PACKAGE (Isolated) SG109IG/883B SG109IG -55°C to 125°C -55°C to 125°C TAB IS GROUND VOUT GROUND VIN 3-PIN TO-39 METAL CAN T-PACKAGE SG109T/883B JAN109T SG109T SG309T -55°C to 125°C -55°C to 125°C -55°C to 125°C 0°C to 70°C VIN VOUT 1 2 3 GROUND Note 1. Contact factory for JAN and DESC product availability. 2. All parts are viewed from the top. 4/90 Rev 1.1 2/94 Copyright © 1994 3. Product is also available in leadless chip carrier (LCC) and hermetic flat pack (F). Contact factory for price and availability. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 LINFINITY Microelectronics Inc. 3