SG78xx

SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET DESCRIPTION The SG78xxA/SG78xx series of positive regulators offer self contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to 50V (SG78xxA series only). These units feature a unique on-chip trimming system to set the output voltages to within ±1.5% of nominal on the SG78xxA series, ±2.0% on the SG78xx series. The SG78xxA versions also offer much improved line and load regulation characteristics. Utilizing an improved bandgap reference design, problems have been eliminated that are normally associated with the Zener diode references, such as drift in output voltage and large changes in the line and load regulation. All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used. Product is available in hermetically sealed TO-257 (both case grounded ‘G’ and isolated ‘IG’), TO-3, TO-39 and LCC packages. KEY FEATURES Output Voltage Set Internally to ±1.5% on SG78xxA Input Voltage Range to 50V max. on SG78xxA Two Volt Input-Output Differential Excellent Line and Load Regulation Foldback Current Limiting Thermal Overload Protection Voltages Available: 5V, 12V, 15V Contact Factory for Other Voltage Options Available in Surface Mount Package HIGH RELIABILITY FEATURES - SG78xxA/78xx Available to MIL-STD – 883, ¶ 1.2.1 MIL-M38510/10702BXA - JAN7805T MIL-M38510/10703BXA - JAN7812T MIL-M38510/10704BXA - JAN7815T MIL-M38510/10706BYA - JAN7805K MIL-M38510/10707BYA - JAN7812K MIL-M38510/10708BYA - JAN7815K Radiation Data Available MSC-AMSG level "S" Processing Available Available to DSCC – Standard Microcircuit Drawing (SMD) WWW . Microsemi . C OM IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com PRODUCT HIGHLIGHT SCHEMATIC DIAGRAM * SG78XX SG78XX * For normal operation the (V ) sense pin must be externally connected to the load. OS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET ABSOLUTE MAXIMUM RATINGS WWW . Microsemi . C OM Device Output Voltage 5V 12V 15V Input Voltage 35V 35V 35V Input Voltage (Transient)(Note 3) 50V 50V 50V Input Voltage Differential (Output Shorted to Ground) 35V 35V 35V Operating Junction Temperature .........................................................................................................................................................150°C Storage Temperature Range ................................................................................................................................................. -65°C to 150°C Lead Temperature (Soldering 10 seconds) ..........................................................................................................................................300°C Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of specified terminal. Note 3: Operation at high input voltages is dependent upon load current. When load current is less than 5mA, output will rise out of regulation as inputoutput differential increases beyond 30V. Note also from figure 1, that maximum load current is reduced at high voltages. The 50V input rating of the SG78xxA series refers to ability to withstand high line or transient conditions without damage. Since the regulator’s maximum current capability is reduced, the output may fall out of regulation at high input voltages under nominal loading. THERMAL DATA K TO-3 3-Terminal Metal Can (Two pins and case) 3.0°C/W 35°C/W THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA T TO-39 3-Pin Metal Can 15°C/W 120°C/W THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA G TO-257 3-Pin Hermetic 3.5°C/W 42°C/W THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA IG TO-257 3-Pin Hermetic (Isolated) 4.0°C/W 42°C/W THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA L Leadless Chip Carrier 20-Pin Ceramic 35°C/W 120°C/W PACKAGE DATA PACKAGE DATA THERMAL RESISTANCE-JUNCTION TO CASE, θJC THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA Junction Temperature Calculation: TJ = TA + (PD x θJA). The θJA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 2 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET CHARACTERISTIC CURVES WWW . Microsemi . C OM Figure 1 – Peak Output Current vs. Input – Output Differential Figure 2 – Minimum Input – Output Voltage vs. Load Current Figure 3 – Ripple Rejection vs. Frequency Figure 4 – Temperature Coefficient of Output Voltage GRAPHS GRAPHS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 3 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET APPLICATIONS WWW . Microsemi . C OM Figure 5 – Fixed Output Regulator Figure 6 – Circuit for Increasing Output Voltage Figure 7 – High Output Current, Short Circuit Protected Figure 8 – Adjustable Output Regulator, 7V to 30V RECOMMENDED OPERATING CONDITIONS Parameter Operating Junction Temperature Range (Note 2) Note 2: Range over which the device is functional. SG78xx / 78xxA Min Typ Max 55 150 Units °C A APPLICATIONS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 4 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7805A / SG7805 with -55°C < TA < 125°C, VIN = 10V, IO = 500mA for the K, G and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. Parameter Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note Test Conditions TJ = 25°C VIN = 7.5V to 20V, TJ = 25°C VIN = 8V to 12V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 250°C VIN = 8V to 20V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO =5mA to 500mA, P < 20W Over Temperature Range TJ = 25°C With Line: VIN = 8V to 25V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T-Pkg: IO = 500mA Power Pkgs: VIN = 10V, TJ = 25°C T – Pkg: VIN = 10V, TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T – Pkg: VIN = 35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (Note 2) 1000 hours @ TJ = 125°C IO = 5mA SG7805A Typ Max 5.00 5.08 5 25 2 12 15 50 5 25 5 25 5.00 5.00 4 5.15 5.15 7 6 0.8 0.5 0.5 2.5 3.3 2.0 1.2 0.7 40 20 175 20 175 SG7805 Typ 5.00 5 2 15 5 20 5.00 5.00 4 Units Max 5.20 25 25 50 25 25 5.35 5.35 7 6 0.8 0.5 0.5 2.5 3.3 2.0 1.2 0.7 40 V mV mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV °C WWW . Microsemi . C OM Min 4.92 Min 4.80 4.85 4.85 4.65 4.65 1.5 0.5 68 2 2.0 1.0 1.5 0.5 68 2 2.0 1.0 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. ELECTRICALS ELECTRICALS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 5 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7812A / SG7812 with -55°C < TA < 125°C, VIN = 19V, IO = 500mA for the K, G and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. Parameter Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note Test Conditions TJ = 25°C VIN = 14.5V to 30V, TJ = 25°C VIN = 16V to 22V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = 15.5V to 27V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO = 5mA to 500mA, P < 2W Over Temperature Range TJ = 25°C With Line: VIN = 15V to 30V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T – Pkg: IO = 500mA Power Pkgs: TJ = 25°C T – Pkg: TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T – Pkg: VIN = 35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (note 2) 1000 hours @ TJ = 125°C IO = 5mA SG7812A Typ Max 12.0 12.2 12 60 6 30 28 80 10 40 10 40 12.0 12.0 4 12.3 12.3 7 6 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 40 48 175 48 175 SG7812 Typ 12.0 12 6 28 10 10 12.0 12.0 4 Units Max 12.5 120 60 120 60 60 12.6 12.6 7 6 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 40 V mV mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV °C WWW . Microsemi . C OM Min 11.8 Min 11.5 11.7 11.7 11.4 11.4 1.5 0.5 61 2 2.0 1.0 1.5 0.5 61 2 2.0 1.0 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. ELECTRICALS ELECTRICALS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 6 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET ELECTRICAL CHARACTERISTICS Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7815A / SG7815 with -55°C < TA < 125°C, VIN = 23V, IO = 500mA for the K, G and IG – Power Packages, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature. Parameter Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown Note Test Conditions TJ = 25°C VIN = 17.5V to 30V, TJ = 25°C VIN = 20V to 26V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T – Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = 18.5V to 30V Power Pkgs: IO = 5mA to 1.0A, P < 20W T – Pkg: IO = 5mA to 500mA, P < 2W Over Temperature Range TJ = 25°C With Line: VIN = 18.5V to 30V With Load: IO = 5mA to 1.0A (Power Pkgs) IO = 5mA to 500mA (T) ∆VO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T – Pkg: IO = 500mA Power Pkgs: TJ = 25°C T – Pkg: TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T – Pkg: VIN = 35V, TJ = 25°C ∆VIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100kHz (note 2) 1000 hours @ TJ = 125°C IO = 5mA SG7815A Typ Max 15.0 15.2 15 75 8 40 30 100 12 50 12 50 15.0 15.0 4 15.4 15.4 7 6 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 40 60 175 60 175 SG7815 Typ 15.0 15 8 30 12 12 15.0 15.0 4 Units Max 15.6 150 75 150 75 75 15.7 15.7 7 6 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 40 V mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV WWW . Microsemi . C OM Min 14.8 Min 14.4 14.6 14.6 14.3 14.3 1.5 0.5 60 2 2.2 0.9 1.5 0.5 60 2 2.2 0.9 1: All regulation tests are made at constant junction temperature with low duty cycle testing. 2: This test is guaranteed but is not tested in production. NOTES E ELECTRICALS Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 7 SG78xxA/78xx TM ® Positive Fixed Voltage Regulator P RODUCT D ATASHEET CONNECTION DIAGRAMS & ORDERING INFORMATION (SEE NOTES BELOW) WWW . Microsemi . C OM Package Part No. SG78xxAK/883B SG7805AK/DESC SG7812AK/DESC SG7815AK/DESC SG78xxAK SG78xxK/883B JAN7805K JAN7812K JAN7815K SG78xxK SG78xxAT/883B SG7805AT/DESC SG7812AT/DESC SG7815AT/DESC SG78xxAT SG78xxT/883B JAN7805T JAN7812T JAN7815T SG78xxT SG78xxAIG/883B SG7805AIG/DESC SG7812AIG/DESC SG7815AIG/DESC SG78xxAIG SG78xxIG/883B SG78xxIG SG7805AL/DESC SG7812AL/DESC SG7815AL/DESC SG78xxL/883B 3-Terminal TO-3 Metal Can K – Package 3-Pin TO-39 Metal Can T – Package 3-Pin Hermetic TO-257 IG – Package (Isolated) 20-Pin Ceramic Leadless Chip Carrier L – Package Ambient Temperature Range -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C Connection Diagram VIN 1 2 VOUT Case is Ground VIN VOUT 1 2 3 GND Case is Ground VOUT GROUND VIN N.C. N.C. N.C. 20 3 2 1 N.C. N.C. N.C. GND N.C. N.C. 19 VIN 4 5 6 7 8 18 17 16 15 14 N.C. VIN N.C. VO SENSE N.C. 9 10 11 12 13 N.C. N.C. VOUT See Notes 5 & 6 3-Pin Hermetic TO-257 G – Package (Case is Ground) SG78xxAG/883B SG7805AG/DESC SG7812AG/DESC SG7815AG/DESC SG78xxAG SG78xxG/883B SG78xxG -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C VOUT N.C. VOUT GROUND VIN Case is Ground MECHANICALS MECHANICALS Note 1: Contact factory for JAN and DESC product availability. 2: All parts are viewed from the top. 3: “xx” to be replaced by output voltage of specific fixed regulator. 4: Some products will be available in hermetic flat pack (F). Consult factory for price and availability. 5: Both inputs and outputs must be externally connected together at the device terminals. 6: For normal operation, the VO SENSE pin must be externally connected to the load. Copyright © 1997 Rev. 1.5, 2010-07-13 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 8