SMBG5925A/TR13

SMBG5913 – SMBG5956e3, SMBJ5913 – SMBJ5956e3 Available Silicon 2.0 Watt Zener Diodes DESCRIPTION The SMB(G/J)5913B – SMB(G/J)5956B series of surface mount 2.0 watt Zener diodes provides a selection from 3.3 to 200 volts with tolerance options of 10%, 5% and 2%. This series has the same electrical characteristics as the axial, JEDEC registered 1N5913 1N5956 series with the exception of its higher, 2.0 W power rating (versus 1.5 W for the JEDEC series). This is permitted by the lower thermal resistance of the surface mount packaging. The SMBG Gull-wing design in the DO-215AA package provides for visible solder connections. The SMBJ J-bend design in the DO-214AA package permits greater PC board mounting density. The series is available with SnPb plated leaded or RoHS compliant mattetin plating. DO-215AA Gull-wing Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • Surface mount equivalent to JEDEC registered 1N5913 thru 1N5956 number series but with a 30% higher power rating. Ideal for high-density and low-profile mounting. Zener voltage available 3.3 V to 200 V. Standard voltage tolerances are plus/minus 10%, 5% and 2%. • RoHS compliant versions available. DO-214AA J-bend Package NOTE: All SMB series are equivalent to prior SMS package identifications. APPLICATIONS / BENEFITS • • • • • • Regulates voltage over a broad operating current and temperature range. Non-sensitive to ESD per MIL-STD-750 method 1020. Withstands high surge stresses (see figure 2). Minimal changes of voltage versus current. High specified maximum current (I ZM ) when adequately heat sunk. Moisture classification is Level 1 per IPC/JEDEC J-STD-020B with no dry pack required. MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Lead Thermal Resistance Junction-to-Ambient (1) o Steady-State Power Dissipation @ TL < 80 C (2) Symbol Value T J and T STG -65 to +150 R ӨJL 35 o C/W R ӨJA 100 o C/W PD 2.0 Forward Voltage @ 200 mA VF 1.2 Solder Temperature @ 10 s T SP 260 Unit o C W V o C Notes: 1. When mounted on FR4 PC board (1oz Cu) with recommended footprint (see last page). 2. Or 1.25 watts at T A = 25 ºC when mounted on FR4 PC board with recommended footprint (also see figure 1.) MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01101, Rev. A (1/10/13) ©2013 Microsemi Corporation Page 1 of 5 SMBG5913 – SMBG5956e3, SMBJ5913 – SMBJ5956e3 MECHANICAL and PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating solderable per MIL-STD-750, method 2026. MARKING: Part number without SMBx prefix (e.g. 5914B, 5914Be3, MX5946C, 5956A, etc.). POLARITY: Cathode indicated by band. Diode to be operated with the banded end positive with respect to the opposite end for Zener regulation. TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape (add “TR” suffix to part number). Consult factory for quantities. WEIGHT: 0.1 grams. See Package Dimensions on last page. PART NOMENCLATURE SM B G 5914 A Surface Mount (e3) RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant Package Size Lead Form G = Gull-Wing J = J-Bend Breakdown Voltage Tolerance A = +/- 10% B = +/- 5% C = +/- 2% JEDEC type number (See Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol IR I Z , I ZT , I ZK I ZM VR VZ Z ZT or Z ZK Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z ), at a specified test point (I ZT ), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z ) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. RF01101, Rev. A (1/10/13) ©2013 Microsemi Corporation Page 2 of 5 SMBG5913 – SMBG5956e3, SMBJ5913 – SMBJ5956e3 ELECTRICAL CHARACTERISTICS @ T L = +30 ºC PART NUMBER Gull-Wing SMBG5913B SMBG5914B SMBG5915B SMBG5916B SMBG5917B SMBG5918B SMBG5919B SMBG5920B SMBG5921B SMBG5922B SMBG5923B SMBG5924B SMBG5925B SMBG5926B SMBG5927B SMBG5928B SMBG5929B SMBG5930B SMBG5931B SMBG5932B SMBG5933B SMBG5934B SMBG5935B SMBG5936B SMBG5937B SMBG5938B SMBG5939B SMBG5940B SMBG5941B SMBG5942B SMBG5943B SMBG5944B SMBG5945B SMBG5946B SMBG5947B SMBG5948B SMBG5949B SMBG5950B SMBG5951B SMBG5952B SMBG5953B SMBG5954B SMBG5955B SMBG5956B J-Bend SMBJ5913B SMBJ5914B SMBJ5915B SMBJ5916B SMBJ5917B SMBJ5918B SMBJ5919B SMBJ5920B SMBJ5921B SMBJ5922B SMBJ5923B SMBJ5924B SMBJ5925B SMBJ5926B SMBJ5927B SMBJ5928B SMBJ5929B SMBJ5930B SMBJ5931B SMBJ5932B SMBJ5933B SMBJ5934B SMBJ5935B SMBJ5936B SMBJ5937B SMBJ5938B SMBJ5939B SMBJ5940B SMBJ5941B SMBJ5942B SMBJ5943B SMBJ5944B SMBJ5945B SMBJ5946B SMBJ5947B SMBJ5948B SMBJ5949B SMBJ5950B SMBJ5951B SMBJ5952B SMBJ5953B SMBJ5954B SMBJ5955B SMBJ5956B ZENER VOLTAGE TEST CURRENT VZ I ZT DYNAMIC IMPEDANCE Z ZT Volts 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50.0 45.7 41.2 37.5 34.1 31.2 28.8 25.0 23.4 20.8 18.7 17.0 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 Ohms 10.0 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10.0 12.0 14.0 17.5 19.0 23.0 28.0 33.0 38.0 45.0 53.0 67.0 70.0 86.0 100.0 120.0 140.0 160.0 200.0 250.0 300.0 380.0 450.0 600.0 700.0 900.0 1200.0 KNEE CURRENT REVERSE CURRENT I ZK KNEE IMPEDANCE Z ZK MAX. DC CURRENT IR REVERSE VOLTAGE VR mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Ohms 500 500 500 500 500 400 300 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 µA 100.0 75.0 25.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Volts 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56.0 62.2 69.2 76.0 83.6 91.2 98.8 114.0 121.6 136.8 152.0 mA 606 554 512 464 425 392 356 321 293 266 242 218 200 181 166 153 133 122 110 100 90 82 73 66 60 54 50 45 41 38 34 32 29 26 24 10 20 17 16 14 13 12 10 9 I ZM NOTE 1: Zener voltage (Vz) is measured at T L = 30 oC and 20 seconds after application of dc current. NOTE 2: The Zener impedance is derived from 1 kHz ac voltage resulting from an ac current modulation having an rms value equal to 10% of the dc Zener current (I ZT or I ZK ) superimposed on I ZT or I ZK . See MicroNote 202 for Zener impedance variation with different operating currents. NOTE 3: The maximum dc current (I ZM ) is based only on the maximum power of 2.0 watts at T L < 80 oC. These values must be reduced by 37.5% (1.25 W) when mounted on PC boards as described in maximum ratings. RF01101, Rev. A (1/10/13) ©2013 Microsemi Corporation Page 3 of 5 SMBG5913 – SMBG5956e3, SMBJ5913 – SMBJ5956e3 Typical Maximum Power in Watts PD, Maximum Power Dissipation (Watts) GRAPHS o Temperature ( C) Time in Milliseconds T L Lead temp (ºC), or T A on FR4 PC Board C – Capacitance - Picofarads FIGURE 1 – Power Derating Curve FIGURE 2 – Transient Surge Capability Square-Wave Pulse Width (non-Repetitive) in Milliseconds V Z – Zener Voltage – Volts FIGURE 3 – Capacitance vs Zener Voltage RF01101, Rev. A (1/10/13) ©2013 Microsemi Corporation Page 4 of 5 SMBG5913 – SMBG5956e3, SMBJ5913 – SMBJ5956e3 PACKAGE DIMENSIONS SMBG (DO-215AA) Ltr A B C E F K Dimensions Inch Millimeters Min Max Min Max 0.077 0.083 1.96 2.10 0.160 0.180 4.06 4.57 0.130 0.155 3.30 3.94 0.077 0.104 1.95 2.65 0.235 0.255 5.97 6.48 0.015 0.030 0.381 0.762 SMBJ (DO-214AA) Ltr A B C D E L Dimensions Inch Millimeters Min Max Min Max 0.077 0.083 1.96 2.10 0.160 0.180 4.06 4.57 0.130 0.155 3.30 3.94 0.205 0.220 5.21 5.59 0.077 0.104 1.95 2.65 0.030 0.060 0.760 1.52 PAD LAYOUT RF01101, Rev. A (1/10/13) Ltr A B C SMBG (DO-215AA) Inch Millimeters 0.320 8.13 0.085 2.16 0.110 2.79 Ltr A B C SMBJ (DO-214AA) Inch Millimeters 0.260 6.60 0.085 2.16 0.110 2.79 ©2013 Microsemi Corporation Page 5 of 5