UM4000_09

www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available DESCRIPTION The UM4000 and UM4900 series features high power PIN diodes with long carrier lifetimes and thick I-regions. They are especially suitable for use in low distortion switches and attenuators, in HF through S band frequencies. While both series are electrically equivalent, the UM4900 series have higher power ratings due to a shorter thermal path between the chip and package. High charge storage and long carrier lifetime enable high RF levels to be controlled with relatively low bias current. Similarly, peak RF voltages can be handled well in excess of applied reverse bias voltage. Both series have been fully qualified in high power UHF phase shifters and megawatt peak-power duplexers, accumulating thousands of hours of proven performance. Both types have been used in the design of antenna selectors and couplers, where inductance and capacitance elements are switched in and out of filter or cavity networks. The standard finish for the UM4000 series is Sn/Pb. For RoHS compliant devices, use the UMX prefix. (IE: UMX4000SM) The UMX series meets RoHS requirements per EU Directive 2002/95/EC. IMPORTANT: For the most current data, consult our website: www.MICROSEMI.com KEY FEATURES  Voltage ratings to 1000 V  Power dissipation to 37.5 W  Series resistance rated at 0.5 Ω  Carrier lifetime greater than 5 µs  Non cavity design  RoHS compliant version 1 available  Thermally matched configuration  Low capacitance at 0 V bias  Low conductance at 0 V bias  Compatible with automatic insertion equipment 1- RoHS compliant version is supplied with a matte tin finish. (Order UMX4000, UMX4900) www.MICROSEMI.com ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Package Condition UM4000 PD (W) θ (OC/W) A B&E C D SM All 25 OC Pin Temperature ½ in. total length to 25 OC Contact Free Air 25 C Stud Temperature 25 C Stud Temperature 25 C End Cap Temperature 1 us pulse (Single) O O O UM4900 PD (W) 37.5 12 2.5 6 8 7 37.5 25 N/A 100 kW 4 6 θ (OC/W) 4 12.5 25 12 2.5 25 18.75 20 100 kW 6 1.25 APPLICATIONS/BENEFITS  Isolated stud package available  Surface mount package available VOLTAGE RATINGS Reverse Voltage @ 10 uA 100 200 400 600 1000 UM4000 UM4001 UM4002 UM4006 UM4010 UM4900 UM4901 UM4902 UM4906 - UM4000/UM4900 UM4000/UM4900 Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 1 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available www.MICROSEMI.com ELECTRICAL PARAMETERS @ 25C (unless otherwise specified) Parameter Forward Voltage Reverse Current Series Resistance Capacitance Parallel Resistance Carrier Lifetime Symbol VF IR RS CT RP Conditions IF = 100 mA At rated voltage If = 100 mA, F= 100 MHz VR = 100 V, F = 1 MHZ VR = 100 V, F = 100 MHz IF = 10 mA Min Typ. Max 1.0 10 Units V uA Ohm pF Ohms uS 0.3 2.4 10k 5 15k 10 0.5 3 τ STYLE “B” and STYLE “SM” ELECTRICALS ELECTRICALS Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 2 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available RP VS REVERSE BIAS UM4000/UM4900 TYPICAL 103 1 MHz 10 MHz 104 RS VS IF @ 100MHZ www.MICROSEMI.com UM4000/UM4900 TYPICAL 103 Rp (KOhms) 102 100 MHz 500 MHz 1 GHz 101 3 GHz 10-1 102 Rs (Ohms) 101 100 100 0 10 1 10 2 10 10 3 10-2 10-6 10-5 10-4 10-3 10-2 10-1 100 Vr (V) If (A) CT VS REVERSE VOLTAGE VF VS IF UM4000/UM4900 TYPICAL 12 11 10 1 MHz CAPACITANCE (pF) 9 8 7 5 MHz 6 5 10 MHz 4 3 2 1 10 100 200 =>100 MHz Vr (VOLTS) GRAPHS Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 3 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available TYPICAL POWER RATINGS TYPICAL POWER RATINGS www.MICROSEMI.com UM4000/UM4900 POWER RATING TYPICAL 40 PD MAX POWER DISSIPATION (W) 35 30 UM4900C 25 20 UM4000C UM4900D 15 10 UM4000D 5 0 0 25 50 75 100 125 150 175 STUD TEMPERATURE (C) PULSED THERMAL IMPEDANCE PULSE THERMAL IMPEDANCE (DEGREES C/W) UM4000/UM4900 TYPICAL 101 UM4000 UM4900 10 0 10-1 10-2 10-3 10-6 10-5 10-4 10-3 10-2 10-1 100 PULSE WIDTH (SECONDS) GRAPHS Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 4 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available STYLE “A” STYLE “B” www.MICROSEMI.com STYLE “C” STYLE “CR” MECHANICAL Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 5 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748 www.MICROSEMI.com UM4000 / UM4900 HIGH POWER PIN DIODES RoHS Compliant Versions Available STYLE “D” STYLE “DR” www.MICROSEMI.com STYLE “E” STYLE “SM” STYLE “SM” FOOTPRINT STYLE “SM” FOOTPRINT NOTES Notes: - Footprint dimensions the terminals and allow for a solder fillet on each end provided placement accuracy is within 0.005” - If the mounting method chosen requires the use of an adhesive in addition to the solder, then a round or square spot of adhesive should be centrally located as shown. MECHANICAL Copyright  2007 Rev: 2009-01-19 Microsemi Microwave Products Page 6 75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748