UPDS3200
3 Amp 200 V High Voltage Schottky Barrier
Rectifier
SCOTTSDALE DIVISION
APPEARANCE
The UPDS3200 offers a small and powerful surface mount package for a
high voltage 200 Volt, 3 Amp rated Schottky with low forward voltage and
low leakage current. For critical applications requiring very fast switching,
these higher voltage Schottkys with their “hot carrier” features provide
extremely fast switching to replace conventional ultrafast rectifiers. The
very low thermal resistance of the PowerDI™5 package design also
permits cooler operating junction temperatures for minimal reverse leakage
currents and lower power loss.
PowerDI™5
WWW . Microsemi .C OM
DESCRIPTION
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
•
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Guard Ring Die Construction for Transient Protection
High Current Low Forward Voltage Drop
Low Leakage Current
High Junction Temperature Capability
High Forward Surge Current Capability
Environmentally Friendly “Green” Molding Compound
(No Br, Sb)
Low inductive parasitics for minimal Ldi/dt effects
Lead-Free Finish & RoHS Compliant per EU Directive
Rev 13.2.2003 (Glass and High Temperature Solder
Exemptions Applied per Annex Notes 5 and 7)
• Silicon Schottky (hot carrier) rectifier for minimal trr
and elimination of reverse-recovery oscillations to
reduce need for EMI filtering
• For use in high-frequency switching power
supplies, inverters, free wheeling, and polarity
protection applications
• Low power loss and high efficiency
• Robust package configuration for pick-and-place
handling
• Full-metallic bottom eliminates flux entrapment
MAXIMUM RATINGS
•
•
•
•
•
MECHANICAL AND PACKAGING
•
Thermal Resistance Junction to bottom of case (RθJC)
o
or Junction to Soldering Point (RθJS): 2.0 C/W
•
Thermal Resistance (RθJA): 90oC/W junction to ambient
when mounted on FR-4 PCB, 2 oz. Copper and
minimum recommended pad layout (see last page)
Copyright 2004
12-14-2004 REV 0
•
•
•
•
•
•
•
Case Material: Molded Plastic, Environmentally
Friendly “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture sensitivity: Level 1 per J-STD-020C.
Terminals: Finish – Matte Tin annealed over
Copper lead frame (
per JESD97)
Solderable per MIL-STD-202, Method 208
Marking: See marking information on page 3
Polarity: See Diagram
Weight: 0.096 grams (approx.)
Tape & Reel Option: 5000/reel (13”)
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
UPDS3200
Junction and Storage Temperature (TJ, TSTG): -65 to
+150oC
Average Rectified Output Current (IO): 3 Amps for
Single phase, half wave, 60Hz, resistive or inductive
load (also see Figure 5). For capacitive load, derate
current by 20%.
Peak Repetitive Reverse Voltage (VRRM): 200 V
Working Peak Reverse Voltage (VRWM): 200 V
DC Blocking Voltage (VR): 200 V
RMS Reverse Voltage (VR(RMS)): 141 V
Non-Repetitive Peak Forward Surge Current @ 8.3 ms
Single half sine-wave Superimposed on Rated Load
(IFSM): 180A
Page 1
UPDS3200
3 Amp 200 V High Voltage Schottky Barrier
Rectifier
SCOTTSDALE DIVISION
Part
Number
UPDS3200
Working
Peak
Reverse
Voltage
VRWM
Volts
200
Maximum
RMS
Voltage
VRMS
Volts
141
unless specified otherwise
Minimum
Reverse
Breakdown
Voltage
VBR
Volts
200
Maximum Forward
Voltage
(Note 2)
VF @ 3 A
Volts
VF @ 6 A
Volts
Maximum
Reverse Current
IR @ VRWM
(Note 1)
IR
µA
0.78
0.88
10
Maximum
Reverse Current
IR @ VRWM ,125oC
(Note 1)
IR
mA
4.5
NOTE 1: Short duration test pulse used to minimize self-heating effect.
NOTE 2: See Figure 1 for typical values at various temperatures
WWW . Microsemi .C OM
ELECTRICAL CHARACTERISTICS @ 25oC
GRAPHS
UPDS3200
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
UMA5817 th
UMA5819
Copyright 2004
12-14-2004 REV 0
UPDS3200
SCOTTSDALE DIVISION
3 Amp 200 V High Voltage Schottky Barrier
Rectifier
WWW . Microsemi .C OM
Notes:
2.
3.
4.
FR-4 PCB, 2 oz. Copper, minimum recommended pad layout.
Short duration test pulse used to minimiz self-heating effect.
Polyimide PCB, 2 oz. Copper, minimum recommended pad layout.
MARKING INFORMATION
UPDS3200
S3200 = Product type marking code.
MSC = Manufacturers’ code marking
YYWW = Date code marking
YY = Last digit of year ex: 04 for 2004
WW = Week code 01 to 52
Copyright 2004
12-14-2004 REV 0
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
UPDS3200
SCOTTSDALE DIVISION
3 Amp 200 V High Voltage Schottky Barrier
Rectifier
WWW . Microsemi .C OM
DIMENSIONS AND SCHEMATIC
PowerDI™5
MOUNTING PAD DIMENSIONS
Copyright 2004
12-14-2004 REV 0
UPDS3200
PAD dimensions
(mm)
Z
6.6
X1
1.4
X2
3.6
Y1
0.8
Y2
4.7
C
3.87
E1
0.9
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4
很抱歉,暂时无法提供与“UPDS3200”相匹配的价格&库存,您可以联系我们找货
免费人工找货