UPFS120P

580 Pleasant Street Watertown, MA 02472 Phone:(617) 926-0404 F A X : (617) 924-1235 UPFS120P Features • • • • • • POWERMITE 3 Surface Mount Package MOSFET with Schottky Rectifier for reverse voltage blocking Single 3 leaded device replaces 2 individual components Integral Heat Sink / Locking Tabs Supplied in 16mm Tape and Reel – 6000 units/reel Superior Low Thermal and Electrical capability SURFACE MOUNT P – CHANNEL MOSKEY  Mechanical Characteristics • • • • • Footprint Area of 16.51 mm2 Case: Molded Epoxy Meets UL94VO at 1/8 inch Weight: 72 milligrams Lead and Mounting Temperatures: 260°C max for 10 seconds Description The MOSKEY combines a MOSFET w ith a Schottky Rectifier to provide reverse blocking capability in a single three leaded package. This device is w ell suited for applications such as battery chargers and sw itching w here the intrinsic source-drain diode is an undesirable feature. Absolute Maximum Ratings at 25°C RATING Cathode-to-Source Voltage Gate-to-Source Voltage Cathode Current: Continuous @ TA=25°C Single Pulsed Total Pow er Dissipation Storage Temperature Operating Temperature SYMBOL VKSS VGS IK IKM PD (1) T stg T op VALUE +/- 20 +/- 10 1.0 6.0 1.9 -55 to 150°C -55 to 150°C UNIT Vdc Vdc Adc Apk Watts °C °C Thermal Characteristics Thermal Resistance: Junction to Tab (1)Junction-to-ambient (2)Junction-to-ambient Rjtab Rja (1) Rja (2) 20 65 150 °C/Watt °C/Watt °C/Watt (1) Mounted on 2” square by 0.06’ thick FR4 board with a 1” x1” square 2 ounce copper pattern. (2) Mounted on 0.06 thick FR4 board, using recommended footprint. MSC 10-1-00 PRELIMINARY UPFS120P Electrical Characteristics at 25°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherw ise noted) Symbol Parameter Conditions Min OFF CHARACTERISTICS BVKSS Cathode-Source Breakdow n VGS= 0V; IK = 250uA 20 Voltage IKSSF Zero Gate Voltage Cathode Current: VKS= -16V, VGS = 0V Forw ard IKSSR Zero Gate Voltage Cathode VKS= +16V, VGS = 0V Current:Reverse IGSS Gate-Body Leakage Current VGS= +/- 8V, VKS = 0V ON CHARACTERISTICS (pulsed 500us max, duty cycle < 2%) VGS(TH) Gate Threshold Voltage VKS > VGS; IK = 250uA 1 DELTA Gate Threshold Voltage Temp IK = 250uA, Reference to 25°C VGS(TH)/ Coefficient TJ VKS (ON) Static Cathode-Source On Voltage VGS = 4.5 V; IK = 1A VKS (ON) Static Cathode-Source On Voltage VGS = 4.5 ; IK = 0.5A IK(ON) On State Cathode Current VGS = 4.5 V; VKS = 5V 3 Gfs Forw ard Transconductance VDS = 5V; IK = 0.5A DYNAMIC CHARACTERISTICS Ciss Input Capacitance VKS = 15 V; VGS = 0V, F = 1MHz Coss Output Capacitance VKS = 15 V; VGS = 0V, F = 1MHz Crss Reverse Transfer Capacitance VKS = 15 V; VGS = 0V, F = 1MHz SWITCHING CHARACTERISTICS Td(ON) Turn On Delay Time VDD = 15V, IK = 1A, VGS = 10V, Rg = 6 Ω Tr Turn On Rise Time VDD = 15V, IK = 1A, VGS = 10V, Rg = 6 Ω Td(OFF) Turn Off Delay time VDD = 15V, IK = 1A, VGS = 10V, Rg = 6 Ω Tf Turn Off Fall time VDD = 15V, IK = 1A, VGS = 10V, Rg = 6 Ω Qg Total Gate Charge VDS = 15V, IK = 1A, VGS = 10V Qgs Gate-Source Charge VDS = 15V, IK = 1A, VGS = 10V Qgd Gate-Cathode Charge VDS = 15V, IK = 1A, VGS = 10V Typ Max Units V 1 1 100 1.9 3.5 3 uA mA nA V mV/°C mV mV A S pF pF pF 20 20 30 10 5 ns ns ns ns nC nC nC 750 550 3 165 60 25 8 9 14 2 3.5 0.6 0.8 MSC 10-1-00 PRELIMINARY UPFS120P MECHANICAL SPECIFICATIONS MSC 10-1-00 PRELIMINARY