UPS115U

UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT DESCRIPTION KEY FEATURES W W W. Microsemi . COM In Microsemi’s new Powermite SMT Package, these high efficiency Schottky rectifiers offer power handling capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. In addition to its size advantages, Powermite package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment Low Profile – Maximum height of 1.1 mm 2 Footprint Area of 10 mm Low VF Provides Higher Efficiency Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Supplied in 8mm Tape and Reel – 3,000 units/7” Reel; 12,000 units/13” Reel SURFACE MOUNT POWERMITE Surface Mount Power Package APPLICATIONS/BENEFITS APPLICATI APPLICATIONS/BENEFITS High power Surface Mount Package Guard Ring Protection Ultra Low forward voltage Integral Heat Sink/Locking Tabs Compatible with Automatic Insertion Equipment Full Metallic Bottom Eliminates Flux Entrapment High Surge Capacity Ideal for OR’ing Diode IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com MECHANICAL MECHANICAL CHARACTERISTICS •= •= •= •= Case: Molded Epoxy Meets UL94VO at 1/8 inch Device Marking S15U Lead and Mounting Surface Temperature for Soldering = 260°C Maximum for 10 Seconds UPS115U UPS115U Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 1 UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT W W W. Microsemi . COM MAXIMUM RATINGS RATING Peak Repetitive Reverse Voltage Working Peak Reverse Voltage (Conditions) SYMBOL VRRM VRWM VR Average Rectified Forward Current Repetitive Peak Surge Current Storage Temperature Range Operating Temperature Range Voltage Rate of Change (@ Rated VR and TJ = 25ºC) (@ Rated VR and TL = 65ºC) (Non-Repetitive peak surge current @ IO = 1.0 Amps ) IO IFSM TSTG, TC TJ dv/dt IRM 1.0 50 -55 to 150 -55 to 100 1000 VALUE 15 15 UNIT V V V A A °C °C V/us mA Max Peak Reverse Current (VRRM = 15V, TJ = 25ºC) 10 THERMAL CHARACTERISTICS RATING Thermal Resistance, Junction – to – Lead (1) SYMBOL ROJL VALUE 15 UNIT °C/W ELECTRICAL CHARACTERISTICS RATING Maximum Instantaneous Forward Voltage Maximum Instantaneous Reverse Current (Conditions) (IF = 1.0 Amps, TJ = +75ºC) (VR = 15 Vdc, TJ = +25ºC) SYMBOL VF IRM CJ VALUE .22 10 150 UNIT Volts mA Typical Junction Capacitance (TJ = 25ºC, VR = 5V) pF ELECTRICALS ELECTRICALS Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 2 UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT W W W. Microsemi . COM MECHANICAL SPECIFICATIONS MECHANICALS MECHANICALS Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 3 UPS115U C OL OR AD O DIVISIO N ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER 1.0 AMP, 15 VOLT W W W. Microsemi . COM NOTES NOTES Copyright 2000 MSCXXXX 2002-5-16 Rev. 2 Microsemi Colorado Division 800 Hoyt Street, Broomfield CO. 303-469-2161, Fax: 303-466-3775 Page 4