VIDEO-DC-PRL

Imaging and Video Solution Microsemi SmartFusion®2 SoC FPGA and IGLOO®2 FPGA Infrared Camera Head-up Display Medical Imaging Digital Signage Drone Camera Human Machine Interface Machine Vision Driver Assistance System Imaging and Video Solution with Microsemi FPGAs and SoCs Microsemi provides a complete, easy-to-use development environment for designing low-power and secure video processing applications. The solution comprises of an IP suite with modular IP, a field programmable gate array (FPGA) mezzanine card (FMC) for the SmartFusion2 Advanced Development Kit, and a software GUI. Key Features • Modular IP suite • Support for parallel, MIPI CSI-2, and HiSPi sensor interfaces • Display interface for 7:1 LVDS • Audio-processing • Low-power, security, and reliability • Easy-to-use software GUI for real-time audio and video configuration Solution Overview Hardware • Imaging and video FMC daughter card with camera module options • SmartFusion2 Advanced Development Kit¹ Imaging and video FMC and SmartFusion2 Advanced Development Kit IP Suite • Imaging and video processing IP cores in Libero® SoC2: • Sensor interface – Parallel, MIPI CSI-2, and HiSPi • Bayer conversion • Color-space conversion • Image-edge detection • Video scaler • Alpha blending and overlay • Image sharpening filter • Image de-noising filter • Display pattern generation • Display enhancements • Display control (LVDS and Parallel RGB-HDMI) • Obfuscated IPs and reference design (provided for free) • Source code in Verilog (licensing fee required) Imaging and Video IP Cores in Libero SoC Catalog Software GUI • Enables video and audio configurations • GUI communicates with IP blocks through SmartFusion2 ARM® Cortex®-M3 processor • Supports the following demos: • Camera sensor to display • Image edge detection Software GUI for Imaging and Video Kit Drone Camera 2 ADAS³ Machine Vision Thermal Imaging 1 Advanced development kit must be purchased separately; it comes with one-year free platinum license for the Libero System on Chip (SoC) software 2 Microsemi Libero SoC is a comprehensive software toolset for designing with Microsemi FPGAs and SoC FPGAs 3 Advanced Driver Assistance Systems Surveillance 2 Imaging and Video Solution with Microsemi FPGAs and SoCs Camera/Display Signal Chain Microsemi imaging and video solution provides IP cores and designs which are optimized for SmartFusion2 SoC FPGAs and IGLOO2 FPGAs. These IP cores and designs are production ready, and are used to implement the blocks which are essential to the Camera/Display Signal Chain architecture. SmartFusion2 SoC FPGA Microcontroller SubSystem (MSS) ARM Cortex-M3 DDR SDRAM Image Sensor Parallel MIPI CSI-2 HiSPi FPGA Fabric Sensor Interface Image Processing Display Controller I II III I. Sensor Interface Block Display Sensor Interface • Supports multiple sensor interface types • On-chip programmability of image sensor Image Sensor Parallel MIPI-CSI-2 HiSPi Bayer Conversion Image Signal Processing Lens II. Image Processing Block • Per-pixel alpha blending (overlay) and global alpha • 8, 10, 12, and 16 bits-per-color component input and output • Supports 3 × 3 2D median filtering • Programmable gain for edge directions Image Processing From Sensor Interface Color Space Conversion Edge Detection Alpha Blending De-noising Sharpening To Display Controller III. Display Interface Block • Supports LVDS 7:1 • LVDS transmit clock automatically aligned to data • User-configurable display enhancement IP block • Embedded and separate sync signals • Supports RGB parallel and YUV (444 and 442 formats) Display Controller From Image Processing Block Display Display Timing Generator Display Enhancement Display Interface 3 Imaging and Video Solution with Microsemi FPGAs and SoCs Imaging and Video FMC Card DMIC1_L DMIC1_R DMIC2_L DMIC2_R Image Sensor Interface Display LVDS 7:1 Display BackLight Analog Mic Head Phone/ Speaker HDMI RX CON1 HDMI TX CON2 • Flexible image-sensor interface supporting multiple camera-sensor options to connect to the kit • On-board LVDS 7:1 connector and HDMI interface for display connectivity • 100 pin FMC connector for compatibility with upcoming Microsemi FMC-based product kits Imaging and Video Solution Ordering Code Imaging and video card with parallel sensor module VIDEO-DC-PRL Imaging and video card with MIPI CSI-2 sensor module VIDEO-DC-MIPI Imaging and video card with HiSPi sensor module VIDEO-DC-HISPI SmartFusion2 Advanced Development Kit M2SADV150-ADV-DEV-KIT Imaging and video IP Suite RTL source VDSOLCores-RM and VDSOLCores-RMFL For more information on imaging and video solutions visit: http://www.microsemi.com/products/fpga-soc/imaging Send your queries and comments to: imaging@microsemi.com Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com ©2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 4,800 employees globally. Learn more at www.microsemi.com. Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. Imaging-brochure. 1.0. 07/16