LS831_SOT-23

LS831 MONOLITHIC DUAL N-CHANNEL JFET Linear Systems Ultra Low Leakage Low Drift Monolithic Dual JFET The LS831 is a high-performance monolithic dual JFET featuring extremely low noise, tight offset voltage and low drift over temperature specifications, and is targeted for use in a wide range of precision instrumentation applications. The LS831 features a 25mV offset and 10-µV/°C drift. The 6 Pin SOT-23 package provides ease of manufacturing, and a lower cost assembly option. (See Packaging Information). FEATURES  ULTRA LOW DRIFT  | V GS1‐2 / T| ≤10µV/°C  ULTRA LOW LEAKAGE  IG = 80fA TYP.  LOW NOISE  en = 70nV/√Hz TYP.  LOW CAPACITANCE  CISS = 3pF MAX.  ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted)  Maximum Temperatures  Storage Temperature  ‐65°C to +150°C  Operating Junction Temperature  +150°C  Maximum Voltage and Current for Each Transistor – Note 1  ‐VGSS  Gate Voltage to Drain or Source  40V  ‐VDSO  Drain to Source Voltage  40V  ‐IG(f)  Gate Forward Current  10mA  ‐IG  Gate Reverse Current  10µA  Maximum Power Dissipation  Device Dissipation @ Free Air – Total                 400mW @ +125°C    MATCHING CHARACTERISTICS @ 25°C UNLESS OTHERWISE NOTED SYMBOL  CHARACTERISTICS  VALUE  UNITS  CONDITIONS  | V GS1‐2 / T| max.  DRIFT VS.  10  µV/°C  VDG=10V, ID=30µA  TEMPERATURE  TA=‐55°C to +125°C  | V GS1‐2 | max.  OFFSET VOLTAGE  25  mV  VDG=10V, ID=30µA  TYP.  60  ‐‐    300  100  0.6    ‐‐  1    2  ‐‐    ‐‐  ‐‐  ‐‐  5  1    ‐‐  ‐‐    90  90    ‐‐  20    ‐‐  ‐‐  ‐‐  MAX.  ‐‐  ‐‐    500  200  3    10  5    4.5  4    0.1  0.1  0.2  0.5  ‐‐    5  0.5    ‐‐  ‐‐    1  70    3  1.5  0.1  UNITS  V  V    µmho  µmho  %    mA  %    V  V    pA  nA  pA  nA  pA    µmho  µmho    dB  CONDITIONS  VDS = 0                  ID=1nA        I G= 1nA               ID= 0               IS= 0    VDG= 10V         VGS= 0V      f = 1kHz       VDG= 10V         ID= 30µA    f = 1kHz      VDG= 10V              VGS= 0V      VDS= 10V               ID= 1nA                VDS=10V                 ID=30µA    VDG= 10V ID= 30µA  TA= +125°C   VDS =0  VGS= 0V, VGS= ‐20V, TA= +125°C  VGG = 20V    VDG= 10V              VGS= 0V  VDG=  10V            ID= 30µA    ∆VDS = 10 to 20V        ID=30µA  ∆VDS = 5 to 10V        ID=30µA  VDS= 10V      VGS= 0V       RG= 10MΩ  f= 100Hz           NBW= 6Hz  VDS=10V   ID=30µA   f=10Hz  NBW=1Hz    VDS= 10V,  VGS= 0V,  f= 1MHz  VDS= 10V,  VGS= 0V,  f= 1MHz  VDS= 10V,   ID=30µA  LS831 Applications: Wideband Differential Amps High-Speed,Temp-Compensated SingleEnded Input Amps High-Speed Comparators Impedance Converters and vibrations detectors. ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL  CHARACTERISTICS  MIN.  BVGSS  Breakdown Voltage  40  BVGGO  Gate‐To‐Gate Breakdown  40    TRANSCONDUCTANCE    YfSS  Full Conduction  70  YfS  Typical Operation  50  |YFS1‐2 / Y FS|  Mismatch  ‐‐  DRAIN CURRENT      IDSS  Full Conduction  0.5  |IDSS1‐2 / IDSS|  Mismatch at Full Conduction  ‐‐  GATE VOLTAGE      VGS(off) or Vp  Pinchoff voltage  0.6  VGS(on)  Operating Range  ‐‐    GATE CURRENT    ‐IGmax.  Operating  ‐‐  ‐IGmax.  High Temperature  ‐‐  ‐IGSSmax.  At Full Conduction  ‐‐  ‐IGSSmax.  High Temperature  5  IGGO  Gate‐to‐Gate Leakage  ‐‐    OUTPUT CONDUCTANCE    YOSS  Full Conduction  ‐‐  YOS  Operating  ‐‐    COMMON MODE REJECTION    CMR  ‐20 log | V GS1‐2/ V DS|  ‐‐  ‐20 log | V GS1‐2/ V DS|  ‐‐    NOISE    NF  Figure  ‐‐  en  Voltage  ‐‐    CAPACITANCE    CISS  Input  ‐‐  CRSS  Reverse Transfer  ‐‐  CDD  Drain‐to‐Drain  ‐‐  Click To Buy   dB  nV/√Hz    pF  pF  pF  Note 1 – These ratings are limiting values above which the serviceability of any semiconductor may be impaired Available Packages: LS831 / LS831 in SOT-23 LS831 / LS831 available as bare die Please contact Micross for full package and die dimensions Tel: +44 1603 788967 Email: chipcomponents@micross.com Web: http://www.micross.com/distribution Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.