LSID101_TO-71

ID101 LOW LEAKAGE PICO-AMP DUAL DIODE Linear Systems replaces discontinued Intersil ID101 The ID101 is a low leakage Monolithic Dual Pico-Amp Diode The ID101 low-leakage monolithic dual diode provides a superior alternative to conventional diode technology when reverse current (leakage) must be minimized. In addition the monolithic dual construction allows excellent capacitance matching per diode. The ID101 features a leakage current of 0.1 pA and is well suited for use in applications such as input protection for operational amplifiers. FEATURES  DIRECT REPLACEMENT FOR INTERSIL ID101  REVERSE LEAKAGE CURRENT  REVERSE BREAKDOWN VOLTAGE  REVERSE CAPACITANCE  ABSOLUTE MAXIMUM RATINGS (Note 1)  @ 25°C (unless otherwise noted)  Maximum Temperatures  Storage Temperature  Operating Junction Temperature  Maximum Power Dissipation  Continuous Power Dissipation   Maximum Currents Forward Current   Reverse Current  Maximum Voltages  Reverse Voltage  Diode to Diode Voltage  IR = 0.1pA  BVR ≥ 30V  Crss = 0.75pF  ID101 Benefits: Negligible Circuit Leakage Contribution Circuit “Transparent” Except to Shunt High-Frequency Spikes Simplicity of Operation ‐65°C to +200°C  ‐55°C to +150°C  300mW  20mA  100µA  30V  ±50V  ID101 Applications: Op Amp Input Protection Multiplexer Overvoltage Protection   ID101 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL  CHARACTERISTICS  MIN.  TYP.  BVR  Reverse Breakdown Voltage  30  ‐‐  VF  Forward Voltage  0.8  ‐‐  IR  Reverse Leakage Current  ‐‐  0.1  ‐‐  2.0  |IR1‐IR2|  Differential Leakage Current  ‐‐  ‐‐  CrSS  Total Reverse Capacitance(Note 2)  ‐‐  0.75  Note 1 - Absolute maximum ratings are limiting values above which ID101 serviceability may be impaired. Note 2 - Design reference only, not 100% tested Click To Buy pF  LSID101  TO-71 (Bottom View) Available Packages: MAX.  ‐‐  1.1  ‐‐  10  3  1  UNITS  V  V    pA  CONDITIONS  IR = 1µA  IF = 10mA  VR = 1V  VR = 10V  VR = 10V, f = 1MHz  FIGURE 1 – Operational Amplifier Protection    Input Differential Voltage limited to 0.8V (typ) by Diodes ID101  D1 and D2. Common Mode Input voltage limited by Diodes ID101  D3 and D4 to ±15V.  FIGURE 2  – Sample & Hold Circuit    Typical Sample and Hold circuit with clipping. ID101 diodes  reduce offset voltages fed capacitively from the ID101 switch  gate. LSID101  Micross Components Europe Tel: +44 1603 788967 Email: chipcomponents@micross.com Web: http://www.micross.com/distribution ID101 in TO-71 ID101 available as bare die Please contact Micross for full package and die dimensions Note pins 3 & 5 must not be connected, in  any fashion or manner, to any circuit or node  Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: baredie@micross.com Web: www.micross.com/distribution.aspx