0434-0-15-01-03-27-10-0

PIN RECEPTACLES FOR .040” - .060” DIAMETER PINS (#03 CONTACT) FOR .059” - .063” DIAMETER PINS (#42 CONTACT) 0433/8433 0435/0436 043X-0-15-XX-03-XX-10-0 X433-0-15-XX-03-XX-04-0 Press-fit in .106 mounting hole .120 DIA. .105 DIA. .031 .076 .160 .109 DIA. N .270 .102 DIA. Basic Part Number Length A Depth N 0433-0 8433-0 .120 .315 .205 .230 C DIA. K .160 .255 .100 DIA. .290 Basic Part Number Dia. C Length K 0435-0 0436-0 .118 .125 .050 .070 A .040 DIA. 0342 6342 Hex press-fit in .090±.002 plated through-hole Hex press-fit in .090±.002 plated through-hole 0342-0-15-XX-42-XX-10-0 .106 DIA. Solder mount in .102 min. mounting hole Also available on 24mm wide carrier tape: 950 parts per 13” reel See page 194.17 for Tape & Reel details .106 DIA. .050 .150 .210 6433 6433-0-19-XX-42-XX-10-0 6342-0-15-XX-42-XX-10-0 .084 DIA. .084 DIA. .094 DIA. .094 DIA. .120 DIA. .050 .150 .240 Press-fit in .106 mounting hole Wire crimp termination. Accepts wire sizes 18 AWG Max. / 22 AWG Min. .173 .031 .109 DIA. .203 .102 DIA. .076 .157 .205 .270 .520 .093 DIA. (.250) .060 DIA. HOLE Mechanical Data #42 Contact: Insertion/Extraction Force with a Ø.061 (nominal) pin: First Cycle Insertion Force Extraction Force 20N 6N 2nd & Subsequent Cycles Insertion Force Extraction Force 10N 6N Compliancy Test (the “spring back” characteristic of the contact to accept Ø .059 small pin after insertion of a Ø.063 large pin) : Initial Cycle with Ø.059 pin Ins. Force Ext. Force 18N 6N Second Cycle with Ø.063 pin Ins. Force Ext. Force 22N 7N Third Cycle with Ø.059 pin Ins. Force Ext. Force 3N 2N PAGE 188 | PIN RECEPTACLES (Insertion/Extraction Forces are in Newtons and measured with polished steel gage pins having elliptical shaped tips). ORDER CODE: XXXX - X - XX - XX - XX - XX - XX - 0 SPECIFICATIONS: Shell Material: Brass Alloy 360, 1/2 Hard Contact Material: Beryllium Copper Alloy 172, HT Dimensions: Inches Tolerances On: Lengths: ± .005 Diameters: ± .002 Angles: ±2° RoHS - 2 2011/65/EU BASIC PART # SPECIFY SHELL FINISH: 01 200 μ” TIN/LEAD OVER NICKEL 80 200 μ” TIN OVER NICKEL (RoHS) 15 10 μ” GOLD OVER NICKEL (RoHS) SPECIFY CONTACT FINISH: 01 200 μ” TIN/LEAD OVER NICKEL 80 200 μ” TIN OVER NICKEL (RoHS) 27 30 μ” GOLD OVER NICKEL (RoHS) SELECT CONTACT: #03 or #42 CONTACT (DATA ON PAGE 259) Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com