310-93-103-41-001000

INTERCONNECTS SERIES 310, 311, 315 • .100” GRID SOLDER TAIL • SINGLE ROW STRIPS • SIP sockets accept .015 - .025” diameter pins and standard IC leads • Various solder tails available: standard length, long for multi-layer boards, very low and ultra low profile. See Mill-Max #1001, #0134, #0501 or #1534 pins. See pages 161, 162 and 165 for details .015-.025 .010 * .018 .095 .110 .146 .020 DIA. .165 .125 • Hi-Rel, 4-finger BeCu #12 and #30 contact are rated at 3 amps. See pages 252 and 253 for details • Insulators are high temperature thermoplastic, suitable for all soldering operations FIG. 1 ORDERING INFORMATION Series 310...001 .103 .110 .150 .165 Standard Solder Tail 310-XX-1_ _-41-001000 FIG. 1 Specify number of pins .020 DIA. .170 Series 311...001 .110 O Specify number of pins .015-.025 .010 * .018 .096 Long Solder Tail 311-XX-1_ _-41-001000 FIG. 2 FIG. 2 01-64 .151 01-64 Series 315...001 .122 Very Low Profile O 315-XX-1_ _-41-001000 FIG. 3 Specify number of pins .108 Series 315...003 FIG. 3 Ultra Low Profile O 315-XX-1_ _-41-003000 FIG. 4 .030 DIA. 01-64 Specify number of pins 01-64 .015-.022 .010 * .018 .071 .071 .155 .095 .095 SPECIFY PLATING CODE XX= 11 .030 DIA. FIG. 4 For Electrical, Mechanical & Enviromental Data, See page 264 XX=Plating Code See Below RoHS - 2 2011/65/EU 13 91 93 99 41 43 44 47 Sleeve (Pin) 10 µ” Au 10 µ” Au 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ” Sn 200 µ” Sn 200 µ” Sn 200 µ” Sn Contact (Clip) 10 µ” Au 30 µ” Au 10 µ” Au O 41 & 91 Platings Non-Standard 30 µ” Au 100 µ”Sn/Pb 10 µ” Au 30 µ” Au 100 µ” Sn Au Flash Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com PAGE 65 | INTERCONNECTS .015-.025 .010 * .018