311-41-131-41-001000

www.mill-max.com DATA SHEET PRODUCT NUMBER: 310-93-164-41-001000 310-93-164-41-001000- SPECIFICATIONS General Info Materials Standard Solder Tail Socket Description 1 : Accepts .015"-.025" (0,381-0,635mm) dia leads Type: Interconnect Category: Machined Pin Socket Mounting Style: Through Hole Solder Mount # Pins: 64 RoHS: No Product Lifecycle: Active Product Number 310-93-164-41-001000 Data Sheet Shell Plating: Technical Specs 200 μ" Tin/Lead(93/7) over 100 μ" Nickel Inner Contact 30 μ" Gold over 50 μ" Plating: Nickel Temperature Range2 : -55/+125° C Pitch: .100" (2,540mm) Rows: Single Row (1) Loose Pin/Receptacle 1001 (Brass Alloy) Used: Insulator Material: PCT (c)2021 Mill-Max Mfg Corp. | 516-922-6000 190 Pine Hollow Road, Oyster Bay, NY 11771 Updated 11/11/21 9:12 PM EST - Page 1 of 3 NOTES: 1. Standard Tolerances Assembly tolerance: +/-.010" (.25mm) Connector Length “L” Connector Length “L” Tolerance L ≤ 2” (L ≤ 50.8 mm) +/- .005” (+/- .127 mm) 2< L ≤ 3” (50.8 < L ≤ 76.2 mm) + .007/ - .006” (+ .178/ -.152 mm) 3< L ≤ 4” (76.2 < L ≤ 101.6 mm) + .009 / - .007” (+ .229 / - .178 mm) 4< L ≤ 5” (101.6 < L ≤ 127 mm) + .011 / - .008” (+ .279 / - .203 mm) 5< L ≤ 6.4” (127 < L ≤ 162.56 mm) + .013 / - .009” (+ .330 / - .229 mm) Insulator width: +/-.005 (.13mm) Insulator height: +/-.005 (.13mm) Co-planarity of SMT connectors: .005" (.13mm) up to 1" (25.4mm) in connector length Insulator Flatness: .005" (.13mm) up to 1" (25.4mm) in connector length Pin Length: +/-.005 (.13mm) Pin Diameter: +/-.002 (.051mm) Pin Angle: +/-2° 2. Per IEC 60512-11-(4,-9,-10,-12) CONTACT: Material Beryllium Copper Current Rating (amps) 3.00 Fingers 4 Compliancy 0.005 Length .080" (2,032mm) Contact Group C Product Number 310-93-164-41-001000 Data Sheet (c)2021 Mill-Max Mfg Corp. | 516-922-6000 190 Pine Hollow Road, Oyster Bay, NY 11771 Updated 11/11/21 9:12 PM EST - Page 2 of 3 ADDITIONAL NOTES AND SPECIFICATIONS In the interest of improved design, quality and performance , Mill-Max reserves the right to make changes in its specifications without prior notice. Specifications and tolerances are provided wherever possible. The tolerance on dimensions of critical to function features is typically held tighter than the stated standard tolerances, such as press-fits, holes and lengths affecting the coplanarity of SMT products. Due to the wide variety of interconnects Mill-Max offers, the specific tolerances vary from product to product. If you need information regarding the tolerance of a particular part, please contact Technical Services. RELATED LINKS AND DOCUMENTS Engineering Notebook: ( https://www.mill-max.com/engineering-notebooks/machined-pin-pcb-connectors-interconnects ) Environmental Compliance: ( https://www.mill-max.com/rohs ) Product Number 310-93-164-41-001000 Data Sheet (c)2021 Mill-Max Mfg Corp. | 516-922-6000 190 Pine Hollow Road, Oyster Bay, NY 11771 Updated 11/11/21 9:12 PM EST - Page 3 of 3