346-99-164-41-013000

INTERCONNECTS SERIES 304, 346 • .100” GRID SOLDERLESS PRESS-FIT • SINGLE ROW STRIPS • Unique compliant tail pins conform to the plated through-hole without stressing the inner layers of a multilayer board • Recommended plated through-hole for 304 .015-.025 .010 .018 .110 .150 .175 • For 346 series: .040”+.003” finished plated .044 DIA. .175 .025 DIA. .026 through-hole. Using MM #4612 & #4613 pins. See page 162 for details. Patent No. 4,799,904 • Hi-Rel, 4-finger BeCu #30 contact is rated at 3 amps. See page 253 for details .072 • Insulators are high temperature thermoplastic FIG. 1 ORDERING INFORMATION .015-.025 .010 .018 .102 .110 .150 Series 304...770 .175 FIG. 1 .044 DIA. Specify number of pins .026 .015-.025 .010 * .018 304-XX-1_ _-41-780000 Specify number of pins .045 DIA. .173 .120 .035 DIA. Series 346...012 Compliant Solderless Press-Fit For .060”-.100” Thick Boards FIG. 3 346-XX-1_ _-41-012000 Specify number of pins .018 SLOT Series 346...013 FIG. 3 .110 .195 .045 DIA. 346-XX-1_ _-41-013000 01-64 For Electrical, Mechanical & Enviromental Data, See page 264 XX=Plating Code See Below RoHS - 2 2011/65/EU .035 DIA. .018 SLOT Compliant Solderless Press-Fit Specify number of pins .173 .175 01-64 For .090”-.130” Thick Boards FIG. 4 .015-.025 .010 * .018 FIG. 4 01-64 Mill-Max recommends plating Code 13 for Series 304...770 and 304...780 .110 .195 .101 Solderless Press-Fit For .125” Thick Boards FIG. 2 FIG. 2 .150 01-64 Series 304...780 .072 .101 304-XX-1_ _-41-770000 .250 .025 DIA. .150 Solderless Press-Fit For .062” Thick Boards SPECIFY PLATING CODE XX= 11 13 Sleeve (Pin) 10 µ” Au 10 µ” Au 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ”Sn/Pb 200 µ” Sn 200 µ” Sn 200 µ” Sn 91 Contact (Clip) 10 µ” Au 30 µ” Au 10 µ” Au 93 99 41 30 µ” Au 100 µ”Sn/Pb 10 µ” Au 43 44 30 µ” Au 100 µ” Sn Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com PAGE 73 | INTERCONNECTS .102 series: .036”-.041” use a 1,1mm drill prior to plating. Using MM #0477 & #0478 pins. See page 162 for details