800-10-001-10-001000

INTERCONNECTS .100” Grid (.030” dia.) Pins, Straight and Right Angle Single Row • Pin interconnects available with straight MM #7007 or right angle MM #5005 solder tails. See page 182 for details. • Sockets are available with straight MM #1304 or right angle MM #1305 solder tails. See pages 148 & 149 for details. • MM #1304 and MM #1305 receptacles use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .030” diameter and .025” square pins. See page 221 for details. Series 800, 801 Fig. 1 • Insulators are high temp. thermoplastic. 2002/95/EC RoHS Ordering Information Series 800...10-001 Straight Pin Header Fig. 1 800-XX-0_ _-10-001000 Specify # of pins Series 800...20-001 01-64 Right Angle Pin Header Fig. 2 Fig. 2 800-XX-0 _ _-20-001000 Specify # of pins 02-64 For Electrical, Mechanical & Enviromental Data, See pg. 4 XX=Plating Code See Below For RoHS compliance select p lating code. SPECIFY PLATING CODE XX= 10 10μ” Au 90 200μ” Sn/Pb 40 200μ” Sn Pin Plating Series 801...10-001 Straight Socket Fig. 3 Fig. 3 44 Plating Non-Standard 801-XX-0 _ _-10-001000 01-50 Right Angle Socket Specify # of pins Series 801...20-001 Fig. 4 44 Plating Non-Standard 801-XX-0 _ _-20-001000 01-50 For RoHS compliance select p lating code. Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 XX=Plating Code See Below S PECIFY PLATING CODE XX= 13 10µ” Au 30µ” Au 91 10µ” Au 93 30µ” Au 99 200µ”Sn/Pb 41 10µ” Au 43 44 Fig. 4 Sleeve (Pin) Contact (Clip) 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 30µ” Au 200µ”Sn w w w. m i l l - m a x . c o m 81 516-922-6000