802-10-056-30-001000

INTERCONNECTS SERIES 349, 449, 800, 801, 802, 803 • .100” GRID (.030” DIA. PINS), SURFACE MOUNT HEADERS & SOCKETS • SINGLE AND DOUBLE ROW STRIPS • Series 349 & 449 use MM #4956-1 pins. See .200 .100 .030 DIA. page 218 for details .100 • Series 800 & 802 use MM #7007 pins. See page .030 DIA. .135 .292 .292 .017 .110 215 for details .135 .017 .110 .063 DIA. and accept pin diameters from .025”-.037” and .025” square pins. See page 177 for details • Receptacles use Hi-Rel, 6-finger BeCu #47 .063 DIA. contact rated at 4.5 amps. See page 256 for details FIG. 2 FIG. 1 Number of Pins X .100" .100 • Series 801 & 803 use MM #1304 receptacles • Insulators are high temperature thermoplastic, suitable for all soldering operations ORDERING INFORMATION .195 Series 349...560 .110 .176 Coplanarity .005”. For pin counts >10 positions, consult Technical Support. .100 .175 FIG. 3 .200 Specify number of pins Series 449...560 FIG. 2 Number of Pins X .100" / 2 .100 FIG. 1 Single Row Surface Mount Header 349-10-1_ _-00-560000 02-64 Double Row Surface Mount Header 449-10-2_ _-00-560000 Specify number of pins .030 DIA. .195 Series 800...001 .110 .176 FIG. 3 04-64 Single Row Surface Mount Header 800-10-0_ _-30-001000 Specify number of pins .285 Coplanarity .005”. For pin counts >20 positions, consult Technical Support. .100 FIG. 4 .025-.037 .100 FIG. 4 X .100" .088 SPECIFY PLATING CODE XX= Pin Plating .276 10 µ” Au FIG. 5 .100 FIG. 5 .200 Series 803...001 FIG. 6 .088 .240 .276 RoHS - 2 2011/65/EU .338 .100 .272 FIG. 6 Coplanarity .005”. For pin counts >20 positions, consult Technical Support. 03-50 Double Row Surface Mount Socket 803-XX-_ _ _-30-001000 Specify number of pins Number of Pins X .100" / 2 .100 Single Row Surface Mount Socket 801-43-0_ _-30-001000 Specify number of pins Coplanarity .005”. For pin counts >10 positions, consult Technical Support. .025-.037 .025 * .025 04-72 10 Series 801...001 .338 .170 03-64 Double Row Surface Mount Header 802-10-0_ _-30-001000 Specify number of pins Number of Pins .025 * .025 .240 Series 802...001 SPECIFY PLATING CODE XX= Sleeve (Pin) Contact (Clip) 004-100 XX=Plating Code See Below 93 For Electrical, Mechanical & Enviromental Data, See page 264 43 200 µ”Sn/Pb 200 µ” Sn 30 µ” Au 30 µ” Au Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com PAGE 59 | INTERCONNECTS .030 DIA.