802-90-002-20-001000

INTERCONNECTS .100” Grid (.030” dia.) Pins, Straight and Right Angle Double Row • Pin interconnects available with straight MM #7007 or right angle MM #5005/5107 solder tails. See page 182 for details. • Sockets are available with straight MM #1304 or right angle MM #1305/1306 solder tails. See pages 148 & 149 for details. • MM #1304, #1305 & #1306 receptacles use use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .030” diameter and .025” square pins. See page 221 for details. Series 802, 803 Fig. 1 • Insulators are high temp. thermoplastic. 2002/95/EC RoHS Ordering Information Series 802...10-001 Straight Pin Header Fig. 1 802-XX-0_ _-10-001000 Specify # of pins Series 802...20-001 02-64 Right Angle Pin Header Fig. 2 Fig. 2 802-XX-0 _ _-20-001000 Specify # of pins 02-64 For Electrical, Mechanical & Enviromental Data, See pg. 4 XX=Plating Code See Below For RoHS compliance select p lating code. SPECIFY PLATING CODE XX= 10 10μ” Au 90 200μ” Sn/Pb 40 200μ” Sn Pin Plating Series 803...10-001 Straight Socket Fig. 3 Fig. 3 803-XX-_ _ _-10-001000 Specify # of pins Series 803...20-001 002-100 Right Angle Socket Fig. 4 803-XX-_ _ _-20-001000 Specify # of pins 002-100 For RoHS compliance select p lating code. For Electrical, Mechanical & Enviromental Data, See pg. 4 XX=Plating Code See Below S PECIFY PLATING CODE XX= 13 10µ” Au 30µ” Au 91 10µ” Au 93 30µ” Au 99 200µ”Sn/Pb 41 10µ” Au 43 44 Fig. 4 Sleeve (Pin) Contact (Clip) 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 30µ” Au 200µ”Sn w w w. m i l l - m a x . c o m 82 516-922-6000