830-10-006-10-004000

SPRING-LOADED CONNECTORS SERIES 830 • 2mm GRID FLAT & CONCAVE FACE TARGET CONNECTORS FOR SPRING-LOADED ASSEMBLIES • SINGLE ROW STRIPS • Series 830 2mm Spring Target Connectors, supplied in single row strips .057 DIA. .058 DIA. .110 .157 .045 DIA. (.282) .020 DIA. • T arget connectors provide an excellent goldplated conductive path back to the boardmounted spring pin connector. Available in both through-hole and SMT terminations with the choice of either flat or concave face contact surfaces. Concave face targets provide additional surface area for mating with our standard .032” diameter plungers • Target connectors use MM #1949, #1950, #1951, and #1952 pins. See page 223.1 for details .125 • Insulators are high temperature thermoplastic ORDERING INFORMATION FIG. 1 Series 830...003 132° 830-10-0_ _-10-003000 FIG. 1 .057 DIA. .058 DIA. .110 Specify number of pins .157 .045 DIA. Concave face / Solder Tails 830-10-0_ _-10-004000 FIG. 2 .125 01-20 Series 830...004 (.282) .020 DIA. Flat face / Solder Tails Specify number of pins Series 830...30-003 FIG. 2 .075 FIG. 3 .110 PAGE 22.1 | SPRING-LOADED CONNECTORS Series 830...30-004 Coplanarity .005”. For Pin counts >10 positions, consult Technical Support. FIG. 3 .110 Specify number or pins 02-10 Tube packaged = 000 Tape & reel packaged = 191 400 parts per 13” reel .057 DIA. .075 Concave face / Surface Mount 830-10-0_ _-30-004XXX FIG. 4 132° Specify number or pins 02-10 Tube packaged = 000 Tape & reel packaged = 191 400 parts per 13” reel .140 .048 DIA. .058 DIA. Flat face / Surface Mount 830-10-0_ _-30-003XXX .057 DIA. .058 DIA. 01-20 .140 .048 DIA. RoHS - 2 2011/65/EU Coplanarity .005”. For Pin counts >10 positions, consult Technical Support. FIG. 4 SPECIFY PLATING CODE XX= Pin Plating XX=Plating Code See Below For Electrical, Mechanical & Enviromental Data, See page 264 10 10 μ” Au Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com