CFK2162-P3

CFK2162-P3 QNX@š•@RNP@gh¡ KST@‡b“@p•žˆ˜@g„a™@fet mŒ“ŒŸ@b˜•„‡…„”‡L@i”†N@QPWYU@r•†‘’ˆ @r‡NL@h•›™š•”L@tˆŸ„™@WWPYY tˆ’Z@RXQNYXXNTVPP@@f„ŸZ@RXQNYXXNTVQU@@žžžN“Œ“ŒŸ…˜•„‡…„”‡N†•“ ÐRPPU@mŒ“ŒŸ@b˜•„‡…„”‡L@i”†N CFK2162-P3 Product Specifications July 1997 (1 of 4) Features t High Gain t +34 dBm Power Output t Proprietary Power FET Process t >45% Linear Power Added Efficiency t +29 dBm with 30 dBc Third Order Products t Surface Mount SO-8 Power Package Applications t PCS/PCN Base Stations and Terminals t Wireless Local Loop Description The CFK2162-P3 is a high-gain FET intended for driver amplifier applications in high-power systems, and output stage usage in medium power applications at power levels up to +34 dBm. The device is easily matched and provides excellent linearity at 2 Watts. Manufactured in Celeritek’s proprietary 8 7 6 5 D GND GND D 1.8 to 2.0 GHz +34 dBm Power GaAs FET Package Diagram G GND GND G 1 2 3 4 Back Plane is Source power FET process, this device is assembled in an industry standard surface mount SO-8 power package that is compatible with high volume, automated board assembly techniques. Specifications (TA = 25°C) The following specifications are guaranteed at room temperature in Celeritek test fixture at 1.95 GHz. Parameters Conditions Min Typ Max Units Absolute Maximum Ratings Parameter Symbol Rating Vd = 8V, Id = 800 mA (Quiescent) P-1dB SSG 3rd Order Products (1) Efficiency @ P1dB Vd = 5V, Id = 350 mA (Quiescent) P-1dB SSG Vd = 5V, Id = 1200 mA (Quiescent) P-1dB SSG 33.0 34.0 13.0 14.0 26 — — — 30 43 30.0 11.0 — — — — — — dBm dB dBc % dBm dB Drain-Source Voltage Gate-Source Voltage Drain Current Continuous Dissipation Channel Temperature Storage Temperature VDS VGS IDS PT TCH TSTG 12V (3) -5V Idss 10W 175°C -65°C to +175°C SO-8 Power Package Physical Dimensions — — 32.5 12.0 — — dBm dB Parameters Conditions Min Typ Max Units gm Idss Vp BVGD (3) ΘJL (2) Vds = 2.0V, Vgs = 0V Vds = 2.0V, Vgs = 0V Vds = 3.0V, Ids = 65 mA Igd = 6.5 mA @150°C TCH — — — 18 — 1700 2.8 -1.8 20 10 — — — — mS A Volts Volts °C/W Notes: 1. Sum to two tones with 1 MHz spacing = 29 dBm. 2. See thermal considerations information on page 4. 3. Max (+Vd) and (-Vg) under linear operation. Max potential difference across the device in RF compression (2Vd + |-Vg|) not to exceed the minimum breakdown voltage (Vbr) of +18V. 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CFK2162-P3 Typical Scattering Parameters Frequency (GHz) Mag S11 Ang Mag S21 Ang Product Specifications - July 1997 (2 of 4) (TA = 25°C, Vds = 5 V, Ids = 350 mA) Mag S12 Ang Mag S22 Ang 0.6 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 3.0 3.5 4.0 0.6 1.0 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 3.0 3.5 4.0 0.6 1.0 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 3.0 3.5 4.0 0.946 0.946 0.946 0.945 0.944 0.942 0.938 0.935 0.931 0.927 0.922 0.918 0.914 0.912 0.941 0.957 0.94 0.95 0.951 0.951 0.949 0.946 0.943 0.939 0.935 0.931 0.929 0.925 0.924 0.947 0.961 0.945 0.941 0.947 0.945 0.944 0.941 0.939 0.934 0.93 0.927 0.923 0.919 0.917 0.944 0.96 0.942 -162.45 -176.06 -177.58 -178.58 -179.55 179.53 178.31 176.89 174.99 172.61 169.71 166.09 161.9 157.79 132.34 134.66 138.76 -165 -177.94 178.92 177.92 176.83 175.5 173.67 171.39 168.6 165.15 161.29 157.02 131.72 133.41 137.83 -164.65 -177.32 179.49 178.52 177.34 175.87 174.02 171.59 168.63 165.04 160.94 156.65 131.73 134.09 137.96 4.973 2.885 2.623 2.424 2.27 2.154 2.055 1.982 1.923 1.873 1.828 1.777 1.722 1.664 1.033 0.803 0.803 5.311 3.044 2.391 2.272 2.169 2.09 2.029 1.98 1.93 1.88 1.822 1.757 1.09 0.853 0.85 5.654 3.25 2.535 2.397 2.85 2.192 2.123 2.058 2.006 1.990 1.885 1.714 1.116 0.857 0.841 86.73 73.75 71.82 69.66 67.7 65.68 63.25 60.53 57.74 54.47 50.82 46.63 42.23 37.59 10.11 6.12 1.66 84.94 72.23 66.48 64.41 61.99 59.58 56.57 53.44 49.72 45.76 41.44 36.86 9.25 4.59 0.36 83.55 70.11 63.48 61.32 58.65 55.97 52.85 49.6 45.54 41.52 36.76 32.35 3.58 -1.39 -6.32 0.017 0.018 0.018 0.019 0.019 0.02 0.02 0.021 0.023 0.023 0.023 0.025 0.024 0.026 0.022 0.02 0.023 0.014 0.014 0.015 0.015 0.016 0.017 0.017 0.018 0.019 0.02 0.02 0.021 0.018 0.017 0.021 0.015 0.015 0.015 0.016 0.016 0.017 0.017 0.018 0.019 0.019 0.02 0.02 0.018 0.016 0.02 Vg 91 Ω RF IN 100 pF 11.14 9.37 6.8 6.59 6.53 7.04 4.93 4.08 3.37 1.6 -0.79 -1.23 -4.64 -9.26 -27.73 -21.78 -20.57 13.61 14.39 13.62 14.21 14.13 12.30 12.06 10.27 5.75 7.43 4.37 2.36 -17.77 -13.03 -8.72 10.74 8.2 7.84 8.5 9.62 5.99 6.55 6.89 3.81 -1.07 -1.68 -2.32 -21.43 -16.54 -10.57 Vd 0.1 µF 47 nH 7.5 Ω 0.739 0.748 0.747 0.746 0.742 0.739 0.73 0.722 0.714 0.707 0.70 0.694 0.69 0.689 0.76 0.787 0.74 0.747 0.749 0.741 0.734 0.728 0.72 0.712 0.703 0.696 0.69 0.686 0.687 0.757 0.779 0.73 0.676 0.688 0.684 0.68 0.674 0.666 0.658 0.652 0.644 0.639 0.635 0.636 0.722 0.762 0.723 172.95 169.73 169.56 169.16 168.8 168.03 167.15 165.76 164.09 161.84 158.98 155.54 151.93 148.15 128.69 132.92 136.51 17.19 168.92 167.98 167.24 166.28 165.01 163.24 161.07 158.27 154.9 151.32 147.44 127.79 131.26 134.73 174.61 171.96 171.67 171.06 170.41 169.31 167.71 165.68 163.07 159.85 156.23 152.38 132.33 136.36 140.71 (TA = 25°C, Vds = 5 V, Ids = 1200 mA) (TA = 25°C, Vds = 8 V, Ids = 800 mA) RF Match Data shown in the performance graphs was taken in the test circuits shown at right and on page 3. Layout is important for proper operation. Phase length of input and output 50Ω line varies as a function of exact desired frequency of operation. Output shunt inductor effects output performance. Celeritek recommends the use of a high impedance printed inductor Lambda/4 in length. Please contact the factory for an evaluation board and/or more detailed application support. 0.1 µF 50 Ω 3.3 pF RF OUT 100 pF 1.5 pF uu uu uu uu 100 nH 50 Ω 3.9 pF 1.8 pF 15 pF 3.9 pF CFK2162-P3, 5V, 350 mA 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095 CFK2162-P3 Product Specifications - July 1997 Typical Performance Power Output & Power Added Efficiency vs Power Input 1.95 GHz, VDS = 8 V, I DS = 800 mA 35 50 Power Output 25 20 Efficiency 15 10 -3 2 7 12 Power Input (dBm) 17 22 10 0 30 20 (3 of 4) Power Output & Power Added Efficiency vs Power Input 1.95 GHz, VDS = 5 V, I DS = 1.2 A 35 50 40 Power Output 25 20 Efficiency 15 10 -2 3 8 13 Power Input (dBm) 18 10 23 0 30 20 Power Output (dBm) Efficiency (%) 30 40 Power Output (dBm) 30 37 Power Output and Gain vs Frequency VDS =8V, I DS = 800 mA Power Output and Gain vs Frequency V DS =5V, I DS = 1200 mA 16 37 16 Power Output @ P-1 dB Power Output @ P -1 dB Gain @ P-1 dB 35 33 35 Power Output 33 Gain 31 29 1.8 1.85 1.9 1.95 Frequency, GHz 2.0 14 Gain 13 12 2.0 14 13 12 31 29 1.8 1.85 1.9 1.95 Frequency, GHz Power Output & 3rd Order Products vs Power Input 1.95 GHz, VDS = 8 V, IDS = 800 mA 35 5 Power Output & 3rd Order Products vs Power Input 1.95 GHz, VDS = 5 V, I DS = 1.2 A 35 5 3rd Order Products (dBc) 30 Power Output 25 20 3rd Order Products 15 10 -3 2 7 12 Power Input (dBm) 17 15 25 35 45 55 22 30 Power Output 25 20 3rd Order Products 15 10 -2 8 13 Power Input (dBm) 15 25 35 45 55 23 3 18 Vg 91 Ω RF IN 100 pF Vd 0.1 µF 47 nH 7.5 Ω 0.1 µF 50 Ω 3.3 pF 15 pF 3.9 pF RF OUT 100 pF 1.5 pF 100 pF RF IN Vg 91 Ω Vd 0.1 µF 47 nH 7.5 Ω 0.1 µF 50 Ω 3.3 pF 15 pF 3.9 pF RF OUT 100 pF 1.5 pF 100 nH 50 Ω 100 nH 50 Ω 3.3 pF 1.8 pF 3.9 pF 1.8 pF CFK2162-P3, 5V, 1200 mA 3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 CFK2162-P3, 8V, 800 mA Fax: (408) 986-5095 3rd Order Products (dBc) Power Output (dBm) Power Output (dBm) Gain @ P -1 dB Power Output 15 15 Efficiency (%) uu uu uu uu uu uu uu uu CFK2162-P3 Thermal Considerations Product Specifications - July 1997 (4 of 4) The data shown was taken on a 31 mil thick FR-4 board with 1 ounce copper on both sides. The board was mounted to a baseplate with 3 screws as shown. The screws bring the top side copper temperature to the same value as the baseplate. The thermal resistance to the indicated reference lead, ΘJL, is 10°C/W. The thermal resistance to the reference screw is 12°C/W. 1. Use 1 or 2 ounce copper if possible. 2. Solder all eight leads of the CFK2162-P3 package to the appropriate electrical connection. 3. Solder the copper pad on the backside of the CFK2162-P3 package to the ground plane. 4. Use a large ground pad area with many plated through-holes as shown. 5. If possible, use at least one screw no more than 0.2 inches from the CFK2162-P3 package to provide a low thermal resistance path to the baseplate of the package. Ordering Information The CFK2162-P3 power stage is available in a SO-8 surface mount package. Devices are available in tape and reel. Ordering part numbers are listed. Part Number for Ordering CFK2162-P3 CFK2162-P3-000T Function 1.8 - 2.0 GHz Power Stage 1.8 - 2.0 GHz Power Stage Package SO-8 surface mount power package SO-8 surface mount power package in tape and reel Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer. 3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095