30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Features Small Size High Gain: 12 dB Typical P1dB = +18 dBm, Typical 30 kHz to 30 GHz Bandwidth Low Gain Ripple: 1.0 dB pp Typical Sub 0.25 Micron PHEMT Low DC Power Consumption Applications Input Stage Driver for LiNb03 Modulator Driver Amplifier @ OC-192 Medium Power Linear Gain Block for Broadband Systems Receive Amplifier for OC-192 Chip Diagram
Units in Microns
Description
The CMM2030-BD is a precision GaAs MMIC, medium power amplifier and is part of Celeritek’s family of WideFiber™ products for optical communications applications. The CMM2030-BD optical driver amplifier gives fiber optic system designers a unique combination of wideband frequency coverage, along with a flat response and very low internal jitter. It is a precision PHEMT GaAs MMIC medium power amplifier with +18 dBm @ P1dB. It operates from 30 kHz to 32 GHz with 12 dB linear gain. Low internal
jitter makes it especially well suited for high speed digital data applications. It is an excellent choice as an input stage amplifier for Lithium Niobate (Mach-Zehnder) external modulator driver amplifiers for OC-192/STM64 metropolitan and long-haul dense wave-division multiplexed optical networking applications and other high speed applications. When used as an amplifier to drive Celeritek’s CMM3030-BD as much as 7.5 V peak-to-peak can be achieved. CMM2030-BD amplifiers are shipped in Gel Pack from Celeritek’s foundry.
Specifications (TA = 25°C, VDD = 5V) (On-Wafer Probe)
Parameters Units Min Typ Max
Frequency Range Small Signal Gain Gain Flatness Input VSWR Output VSWR Power Output (@1 dB Gain Compression) @ 9 GHz Current
— dB ±dB — — dBm mA
30 kHz 10.0
30.0 GHz 12.0 0.6 1.8:1 1.7:1 +18.0 100
150
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Absolute Maximum Ratings
Parameter Rating
Die Attach and Bonding Procedures
12 V -5 V 375 mA 3.0 W +175°C -65°C to +175°C +320°C +23 dBm
Die Attach: Eutectic die attach is recommended. For eutectic die attach: Preform: AuSn (80% Au, 20% Sn); Stage Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1 min or less. Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (prestressed); Thermocompression bonding is preferred over thermosonic bonding. For thermocompression bonding: Stage Temperature: 250°C; Bond Tip Temperature: 150°C; Bonding Tip Pressure: 18 to 40 gms depending on size of wire.
Drain Voltage Gate Voltage Drain Current Continuous Power Dissipation Channel Temperature Storage Temperature Mounting Temperature Input Power
Typical Performance
P1dB vs Frequency
Performance Optimization
Using the Gain-Ctl facility of the CMM2030-BD, output power may be increased by application of 1.2 to 1.8 Volts to the Bias Control pad. If the Gain-Ctl facility is not used, a fixed voltage at the Bias Control pad can be implemented by
connecting a off-chip parallel resistor to the pad which will lower the output voltage accordingly. If Bias Control voltage is decreased further than those lowest values given in the tables, both gain and output power will start to drop.
Page 2 of 4
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Typical Performance
S11 vs Frequency S21 vs Frequency
S22 vs Frequency
S12 vs Frequency
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Typical Performance
S22 & S11 vs Frequency Gain Delay vs Frequency
Schematic Diagram
Ordering Information
Part Number for Ordering CMM2030-BD Description Optical Modulator Driver Amplifier
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
很抱歉,暂时无法提供与“CMM2030-BD”相匹配的价格&库存,您可以联系我们找货
免费人工找货