CMM3030-BD

30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM3030-BD Features Small Size High Gain: 9 dB Typical Output Voltage up to 7.5 V Peak-to-Peak 30 kHz to 30 GHz Bandwidth Low Gain Ripple: 1.0 dB pp Typical Sub 0.25 Micron PHEMT Applications Driver Amplifier for LiNb03 Modulator @ OC192 bit rate SONET/SHD Transmission Systems Medium Power Linear Gain Block for Broadband Systems Description The CMM3030-BD is a precision GaAs MMIC, medium power amplifier and is part of Celeritek’s family of WideFiber™ products. The CMM3030-BD optical driver amplifier gives fiber optic system designers a unique combination of wideband frequency coverage, along with a flat response and very low internal jitter. It is a precision PHEMT GaAs MMIC medium power amplifier with +23 dBm @ P1dB. It operates from 30 kHz to 30 GHz with a 9 dB linear gain. Low internal jitter makes it especially well suited for high speed digital Chip Diagram Units in Microns data applications. Maximum output voltage is 7.5 V peak-topeak. It is an excellent choice as a driver amplifier for Lithium Niobate (Mach-Zehnder) external optical modulators, to achieve high extinction ratio. Targeted for OC-192/STM64 metropolitan and long-haul dense wave-division multiplexed optical networking applications and other high speed applications. The bit rate can be as high as 15 Gb/s to provide overhead for forward error-correction algorithms. The bias voltage can be adjusted to reduce the output voltage as needed. CMM3030-BD amplifiers are shipped in Gel Pack from Celeritek’s foundry. Specifications (TA = 25°C, VDD = 8V) (On-Wafer Probe) Parameters Units Min Typ Max Frequency Range Small Signal Gain Gain Flatness Input/Output VSWR Power Output (@1 dB Gain Compression) @ 12 GHz Second Order Intercept Point @ 12 GHz Third Order Intercept Point @ 12 GHz Current — dB ±dB — dBm dBm dBm mA 30 kHz 8.0 30.0 GHz 9.0 0.5 1.8:1 24.0 40.0 30.0 275 0.75 2.0:1 22.0 350 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 4 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM3030-BD Absolute Maximum Ratings Parameter Rating Die Attach and Bonding Procedures 12 V -5 V 375 mA 3.0 W +175°C -65°C to +175°C +320°C +23 dBm Die Attach: Eutectic die attach is recommended. For eutectic die attach: Preform: AuSn (80% Au, 20% Sn); Stage Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1 min or less. Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (prestressed); Thermocompression bonding is preferred over thermosonic bonding. For thermocompression bonding: Stage Temperature: 250°C; Bond Tip Temperature: 150°C; Bonding Tip Pressure: 18 to 40 gms depending on size of wire. Drain Voltage Gate Voltage Drain Current Continuous Power Dissipation Channel Temperature Storage Temperature Mounting Temperature Input Power Typical Performance P1dB vs Temperature Performance Optimization Using the Gain-Ctl facility of the CMM3030-BD, output power may be increased by application of 1.2 to 1.8 Volts to the Bias Control pad. If the Gain-Ctl facility is not used, a fixed voltage at the Bias Control pad can be implemented by connecting a off-chip parallel resistor to the pad which will lower the output voltage accordingly. If Bias Control voltage is decreased further than those lowest values given in the tables, both gain and output power will start to drop. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 4 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM3030-BD Typical Performance Schematic Diagram Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 4 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 30 kHz-30 GHz GaAs MMIC Optical Modulator Driver Amplifier August 2006 - Rev 02-Aug-06 CMM3030-BD MMIC termination Circuit Design Bonding Sample Ordering Information Part Number for Ordering CMM3030-BD Description Optical Modulator Driver Amplifier Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 4 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.